NCC Class B3

NCC Class B3
Type and origin
Power type Steam
Builder Beyer, Peacock & Co., Gorton Foundry, Manchester
Build date 1890–1898
Rebuilder NCC, York Road works, Belfast
Rebuild date 1927–1931
Specifications
Configuration 4-4-0
Gauge 5 ft 3 in (1,600 mm)
Leading dia. 3 ft 0 in (0.914 m)
Driver dia. 6 ft 0 in (1.829 m)
Wheelbase 40 ft 9 14 in (12.43 m) including tender
Length 49 ft 6 in (15.09 m)
Width 8 ft 4 in (2.54 m)
Height 13 ft 2 in (4.01 m)
Axle load 16 long tons 0 cwt (35,800 lb or 16.2 t)
Adhesive weight 30 long tons 8 cwt (68,100 lb or 30.9 t)
Loco weight 45 long tons 2 cwt (101,000 lb or 45.8 t)
Total weight 72 long tons 0 cwt (161,300 lb or 73.2 t)
Fuel type Coal
Fuel capacity 6 long tons (13,400 lb (6.1 t)
Water cap 2,120 imperial gallons (9,600 l; 2,550 US gal)
Boiler pressure Nos.21, 24, 28: 160 psi (1.10 MPa)
Nos.60, 61: 200 psi (1.38 MPa)
Heating surface 1,038 sq ft (96.4 m2)
  Tubes 508.7 sq ft (47.26 m2)
  Firebox 103 sq ft (9.6 m2)
Superheater:
  Heating area 233.7 sq ft (21.71 m2)
Cylinders Two
Cylinder size 18 in × 24 in (457 mm × 610 mm)
Valve gear Walschaerts
Valve type 8-inch (203 mm) piston valves
Train brakes Automatic vacuum
Performance figures
Tractive effort Nos.21, 24, 28: 14,688 lbf (65.3 kN)
Nos.60, 61: 18,360 lbf (81.7 kN)
Career
Operators LMS NCC
Number in class 5
Nicknames Whippet
Scrapped 1938–1947

The LMS (Northern Counties Committee) Class B3 4-4-0 passenger steam locomotives were rebuilds of Belfast and Northern Counties Railway (BNCR) two-cylinder compound locomotives. They operated services throughout the NCC’s 5 ft 3 in (1,600 mm) broad gauge system in the north-east of Ireland.

History

The locomotives that comprised the Northern Counties Committee Class B3 were rebuilds of two classes of BNCR “Light Compounds”. These had been built by Beyer, Peacock and Company in the 1890s to the design of the BNCR Locomotive Engineer Bowman Malcolm. The first two members of the class were originally Class C Light Compound 2-4-0s. Rebuilding began with No.28 in 1927 and No.21 in the following year. The other three Class B3 locomotives (24, 60 and 61) were derived from Class B Light Compounds whose only original difference was that they had always been 4-4-0s and not 2-4-0s.

However, before alteration to Class B3, Nos.60 and 61 had already undergone an earlier rebuilding to become Class B1 compounds in 1921 to be followed by No.51 in August 1926. On the other hand, No.24 was rebuilt as a simple (i.e. not compound) in February 1925 to become the solitary member of the somewhat ephemeral Class B2.

All five engines had 18 by 24 inches (460 mm × 610 mm) cylinders with 8-inch (203 mm) piston valves and retained their 6 ft 0 in (1.829 m) driving wheels. The first three members of the class had boilers rated at 160 psi (1.10 MPa) but Nos.60 and 61 had the advantage of 200 psi (1.38 MPa) boilers.

During rebuilding, they were fitted with LMS standard boilers that had to be placed higher than the originals to allow the firebox and ash pan to clear the rear driving wheel axle. The smokebox saddle was extended accordingly to offer support. The closely coupled driving wheels accentuated the appearance of the high-pitched boiler, earning these engines the nickname of “Whippet” because of a perceived resemblance to the breed of racing dog.

All members of the class were officially named after Ulster counties.

No.28 was withdrawn in December 1938 having run just over a quarter million miles in her rebuilt form. The remaining locomotives served throughout World War II and were scrapped in 1946–1947.

Building and withdrawal data

The following table summarises the rebuilding and renumbering history of the Class B3 locomotives.

Original
No.
Class Date
Built
Date
Rebuilt
Class Rebuilt
to B3
New
No.
Name Scrapped
51 C May 1890 1926 August B1 December 1928 21 County Down June 1947
24 B May 1898 1925 February B2 September 1928 24 County Londonderry June 1947
58 C April 1890 June 1927 28 County Tyrone December 1938
60 B July 1897 1921 B1 June 1932 60 County Donegal October 1946
61 B October 1897 1921 B1 January 1932 61 County Antrim October 1946

Livery

The Class B3 locomotives were painted in crimson lake with yellow and black lining. The LMS crest was carried on the upper cab sides. The initials “NCC” in shaded serif gold capital letters were placed centrally on the tender sides. Number plates were brass with raised digits and edge; they were carried on the lower cab sides with another placed centrally on the back of the tender tank. Curved nameplates were fitted above the leading driving wheel splashers. Buffer beams and number plate and name plate backgrounds were painted red. The engine number was applied to the front buffer beam in shaded gold digits.

References

This article is issued from Wikipedia - version of the 4/15/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.