South Australian Railways 1-3

South Australian Railways 1, 2 & 3

B24
Type and origin
Power type Steam
Total produced 3
Specifications
Configuration 2-4-0WT
Gauge 1600 mm
Total weight [about] 37 tons (38t)
Boiler pressure 80 psi (551 kPa)
Cylinder size 15 x 24 in (38 x 61 cm)
Performance figures
Tractive effort 5486 lb (24.4 kN)
Career
Numbers 1-3
First run 1856
Disposition all scrapped

South Australian Railways 1, 2 & 3 were the first three locomotives used to pull trains on South Australian Railways on the Adelaide to Port Adelaide line in 1856. Built by William Fairbairn in Manchester they were named Adelaide, Victoria and Albert, later being renumbered 1-3. They were later used on the Adelaide to Kapunda line. These locomotives were originally tank engines but received a tender engine conversion in 1869 to increase their capacity for fuel and water prior to their being withdrawn by 1873.[1][2]

After the locomotives were scrapped, the coupling wheels from numbers 1 and 2 were used as bogies on a well wagon known as The Crocodile built by the Adelaide Locomotive Works. It was used to transport narrow gauge locomotives over the broad gauge to and from Islington Railway Workshops until 1977. One set is on display at the National Railway Museum, Port Adelaide and the other at SteamRanger.[1][3] Parts of number 2 were used in the 1882 assembly of E56.

References

  1. 1 2 Turner, Jim (2014). Australian Steam Locomotives 1855-1895. South Windsor: Jim Turner. p. 22. ISBN 9780992497675.
  2. ↑ "Early South Australian locomotive [B 6836] • Photograph". State Library of South Australia. 30 September 2005. Retrieved 22 June 2016.
  3. ↑ Locomotive Wheels National Railway Museum

External links

Media related to South Australian Railways 1-3 at Wikimedia Commons

This article is issued from Wikipedia - version of the 7/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.