South African Class 8A 4-8-0

IMR 8th Class 4-8-0
CSAR Class 8-L1 4-8-0
South African Classes 8A & 8AW 4-8-0

CSAR Class 8-L1 no. 415, SAR Class 8A no. 1106, Breyten, Transvaal, 4 April 1981
Type and origin
♠ Original locomotive, as built
Superheated, outside admission valves
♣ Superheated, inside admission valves, Class 8AW
Power type Steam
Designer Cape Government Railways
(H.M. Beatty)
Builder Neilson, Reid and Company
Sharp, Stewart and Company
Serial number Neilson, Reid 6176-6195
Sharp, Stewart 4848-4867
Model CGR 8th Class
Build date 1902
Total produced 40
Specifications
Configuration 4-8-0 (Mastodon)
Driver 2nd coupled axle
Gauge 3 ft 6 in (1,067 mm) Cape gauge
Leading dia. 28 12 in (724 mm)
Coupled dia. 48 in (1,219 mm)
Tender wheels 33 12 in (851 mm) as built
34 in (864 mm) retyred
Wheelbase 46 ft 10 12 in (14,288 mm)
  Engine 23 ft 3 in (7,087 mm)
  Leading 6 ft (1,829 mm)
  Coupled 13 ft 6 in (4,115 mm)
  Tender 14 ft 7 in (4,445 mm)
  Tender bogie 4 ft 7 in (1,397 mm)
Length:
  Over couplers 54 ft 5 in (16,586 mm)
Height ♠ 12 ft 10 in (3,912 mm)
♣ 12 ft 8 in (3,861 mm)
Frame type Bar
Axle load ♠ 11 LT 16 cwt (11,990 kg)
12 LT (12,190 kg)
♣ 12 LT 11 cwt (12,750 kg)
  Leading ♠ 12 LT 7 cwt (12,550 kg)
♣ 12 LT 15 cwt (12,950 kg)
  Coupled 12 LT (12,190 kg)
  1st coupled ♠ 11 LT 16 cwt (11,990 kg)
♣ 11 LT 18 cwt (12,090 kg)
  2nd coupled ♠ 11 LT 16 cwt (11,990 kg)
♣ 12 LT 11 cwt (12,750 kg)
  3rd coupled ♠ 11 LT 8 cwt (11,580 kg)
♣ 11 LT 19 cwt (12,140 kg)
  4th coupled ♠ 11 LT 6 cwt (11,480 kg)
♣ 11 LT 18 cwt (12,090 kg)
  Tender bogie Bogie 1: 18 LT 4 cwt (18,490 kg)
Bogie 2: 19 LT 8 cwt (19,710 kg)
  Tender axle 9 LT 14 cwt (9,856 kg)
Adhesive weight ♠ 46 LT 6 cwt (47,040 kg)
48 LT (48,770 kg)
♣ 48 LT 6 cwt (49,080 kg)
Loco weight ♠ 58 LT 13 cwt (59,590 kg)
60 LT 15 cwt (61,720 kg)
♣ 61 LT 1 cwt (62,030 kg)
Tender weight 37 LT 12 cwt (38,200 kg)
Total weight ♠ 96 LT 5 cwt (97,790 kg)
98 LT 7 cwt (99,930 kg)
♣ 98 LT 13 cwt (100,200 kg)
Tender type XF (2-axle bogies)
XC, XC1, XD, XE, XE1, XF, XF1, XF2, XJ, XM, XM1, XM2, XM3 permitted
Fuel type Coal
Fuel capacity 6 LT (6.1 t)
Water cap 3,000 imp gal (13,600 l)
Firebox type Round-top
  Firegrate area 21.35 sq ft (1.983 m2)
Boiler:
  Pitch ♠ 7 ft (2,134 mm)
♣ 7 ft 1 in (2,159 mm)
  Diameter 5 ft (1,524 mm)
  Tube plates ♠ 11 ft 12 in (3,366 mm)
♣ 11 ft 38 in (3,362 mm)
  Small tubes205: 2 in (51 mm)
115: 2 in (51 mm)
  Large tubes 18: 5 12 in (140 mm)
Boiler pressure 180 psi (1,241 kPa)
Safety valve Ramsbottom
Heating surface ♠ 1,315 sq ft (122.2 m2)
♣ 1,081 sq ft (100.4 m2)
  Tubes ♠ 1,184 sq ft (110.0 m2)
♣ 950 sq ft (88 m2)
  Firebox 131 sq ft (12.2 m2)
Superheater:
  Heating area ♣ 214 sq ft (19.9 m2)
Cylinders Two
Cylinder size18 12 in (470 mm) bore
19 in (483 mm) bore
♣ 20 in (508 mm) bore
♣ 24 in (610 mm) stroke
Valve gear Stephenson
Valve typeBalanced slide - Piston
Couplers Johnston link-and-pin
AAR knuckle (1930s)
Performance figures
Tractive effort ♠ 23,110 lbf (102.8 kN) @ 75%
24,370 lbf (108.4 kN) @ 75%
♣ 27,000 lbf (120 kN) @ 75%
Career
Operators Imperial Military Railways
Central South African Railways
South African Railways
Zambesi Saw Mills
Zambia Railways
Class IMR 8th Class, CSAR Class 8-L1, SAR Class 8A & 8AW
Number in class 40
Numbers CSAR 401-440, SAR 1092-1131
Delivered 1902
First run 1902
Withdrawn 1972
The leading coupled axle had flangeless wheels

The South African Railways Class 8A 4-8-0 of 1902 was a steam locomotive from the pre-Union era in Transvaal.

In 1902, the Imperial Military Railways placed forty Cape 8th Class 4-8-0 Mastodon type steam locomotives in service. When the Central South African Railways was established later that same year, they were designated Class 8-L1. In 1912, when they were assimilated into the South African Railways, they were renumbered and designated Class 8A.[1][2][3]

Manufacturers

Due to the shortage of locomotives brought about by wartime conditions during the Second Boer War, the Imperial Military Railways (IMR) placed orders for forty Cape 8th Class locomotives with two Scottish locomotive manufacturers in 1901. They were built to the specifications of the 8th Class 4-8-0 Mastodon type which had been designed by H.M. Beatty, the chief locomotive superintendent of the Cape Government Railways (CGR) from 1896 to 1910, and were the last locomotives to be ordered under the military administration of the railways in the Transvaal and Orange Free State.[1][3][4]

H.M. Beatty

Upon the cessation of hostilities in June 1902, the working of all railways was handed over to civil control. On 1 July 1902, the IMR became the Central South African Railways (CSAR).[1]

These forty 8th Class locomotives therefore came onto the CSAR roster, where they were designated Class 8-L1. The twenty engines which had been built by Neilson, Reid and Company were numbered in the range from 401 to 420, and the twenty built by Sharp, Stewart and Company in the range from 421 to 440.[1][3][4][5]

Characteristics

The cylinders were arranged outside the bar frame, with balanced slide valves above, actuated by Stephenson valve gear through rocker shafts. The locomotives were delivered with type XF tenders, which rode on 2-axle bogies and had a capacity of 10 long tons (10.2 tonnes) coal and 3,000 imperial gallons (13,600 litres) water.[1][2]

South African Railways

When the Union of South Africa was established on 31 May 1910, the three Colonial government railways (CGR, Natal Government Railways and CSAR) were united under a single administration to control and administer the railways, ports and harbours of the Union. Although the South African Railways and Harbours came into existence in 1910, the actual classification and renumbering of all the rolling stock of the three constituent railways were only implemented with effect from 1 January 1912.[5][6]

When these forty locomotives were assimilated into the South African Railways (SAR) in 1912, they were renumbered in the range from 1092 to 1131 and designated Class 8A.[3][5][7]

In 1912, all the CGR's 8th Class 2-8-0 Consolidation types and 8th Class 4-8-0 Mastodon types, together with the CSAR's Class 8-L2 and 8-L3 4-8-0 Mastodon type locomotives, were grouped into ten different sub-classes by the SAR. The 4-8-0 locomotives became SAR Classes 8 and 8A to 8F and the 2-8-0 locomotives became Classes 8X to 8Z.[8]

Modification

During A.G. Watson's term as Chief Mechanical Engineer (CME) of the SAR from 1929 to 1936, many of the Class 8 to Class 8F locomotives were equipped with superheated boilers, larger bore cylinders and either inside or outside admission piston valves. The outside admission valve locomotives had their cylinder bore increased from 18 12 inches (470 millimetres) to 19 inches (483 millimetres) and retained their existing SAR classifications, while the inside admission valve locomotives had their cylinder bore increased to 20 inches (508 millimetres) and were reclassified by having a "W" suffix added to their existing SAR classifications.[3][8]

Of the Class 8A locomotives, fourteen were equipped with superheated boilers, 19 inches (483 millimetres) bore cylinders and outside admission piston valves, while retaining their Class 8A classification.[8]

Two locomotives were equipped with superheated boilers, 20 inches (508 millimetres) bore cylinders and inside admission piston valves, and were reclassified to Class 8AW.[8]

Service

Government railways

In SAR service, the 4-8-0 Class 8 family of locomotives served on every system in the country and, in the 1920s, became the mainstay of motive power on many branch lines. Their final days were spent in shunting service. They were all withdrawn from service by 1972.[3]

Industrial

In November 1971, one Class 8A locomotive, no. 1126, was sold to the Zambesi Saw Mills (ZSM) in Zambia. This was the last locomotive to be purchased by this logging company, which worked the teak forests which stretched 100 miles (160 kilometres) to the north-west of Livingstone in Zambia. It had built one of the longest logging railways in the world to serve its sawmill at Mulobezi.[9]

Railway operations ceased at Mulobezi around 1972, whilst operation of the line to Livingstone was taken over by the Zambia Railways (ZR) in 1973. After logging operations had ceased and the ZR had taken over the mainline, engine no. 1126 was employed as a shunting locomotive at Mulobezi. It was returned to Livingstone in December 1975 and eventually, in June 1983, it went to the Railway Museum at Livingstone.[9]

Works numbers

The Classes 8A and 8AW builders, works numbers, renumbering and superheating modifications are listed in the table.[4][5][8]

Illustration

The main picture shows SAR Class 8A no. 1106 at Breyten, Transvaal, on 4 April 1981, before it was plinthed at Ermelo. The original appearance of the locomotive with slide valves and its appearance after modification with outside admission piston valves are illustrated by the pictures below.[10]

References

Wikimedia Commons has media related to South African Class 8A 4-8-0.
  1. 1 2 3 4 5 Holland, D.F. (1971). Steam Locomotives of the South African Railways, Volume 1: 1859-1910 (1st ed.). Newton Abbott, Devon: David & Charles. pp. 124–126. ISBN 978-0-7153-5382-0.
  2. 1 2 Espitalier, T.J.; Day, W.A.J. (1945). The Locomotive in South Africa - A Brief History of Railway Development. Chapter VI - Imperial Military Railways and C.S.A.R. (Continued). South African Railways and Harbours Magazine, January 1945. pp. 12-13.
  3. 1 2 3 4 5 6 Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. pp. 48–49. ISBN 0869772112.
  4. 1 2 3 Neilson, Reid works list, compiled by Austrian locomotive historian Bernhard Schmeiser
  5. 1 2 3 4 Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer's Office, Pretoria, January 1912, pp. 8, 12, 15, 40-41 (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)
  6. The South African Railways - Historical Survey. Editor George Hart, Publisher Bill Hart, Sponsored by Dorbyl Ltd., Published c. 1978, p. 25.
  7. Holland, D.F. (1972). Steam Locomotives of the South African Railways, Volume 2: 1910-1955 (1st ed.). Newton Abbott, Devon: David & Charles. p. 139. ISBN 978-0-7153-5427-8.
  8. 1 2 3 4 5 South African Railways and Harbours Locomotive Diagram Book, 2'0" & 3'6" Gauge Steam Locomotives, 15 August 1941, as amended
  9. 1 2 "Sitimela", a history of the Zambezi Saw Mills Logging Railway, 1911-1972, Geof M Calvert, 2005, published by the Barotse Development Trust, p86, ISBN 0-7974-2837-2
  10. Middleton, John N. (2002). Railways of Southern Africa Locomotive Guide - 2002 (as amended by Combined Amendment List 4, January 2009) (2nd, Dec 2002 ed.). Herts, England: Beyer-Garratt Publications. p. 18.
This article is issued from Wikipedia - version of the 11/30/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.