SP&S Class E-1

Spokane, Portland and Seattle class E-1
Type and origin
Power type Steam
Builder Baldwin Locomotive Works
Serial number 62171–62173
Build date 1938
Specifications
Configuration 4-8-4
UIC class 2′D2′ h2
Gauge 4 ft 8 12 in (1,435 mm)
Driver dia. 77 in (1,956 mm)
Axle load 77,200 lb (35.0 tonnes)
Adhesive weight 290,200 lb (131.6 tonnes)
Loco weight 485,500 lb (220.2 tonnes)
Total weight 865,500 lb (392.6 tonnes)
Fuel type Oil
Boiler pressure 250 psi (1.7 MPa)
Cylinders Two
Cylinder size 28 in × 32 in (710 mm × 810 mm)
Valve gear Walschaerts
Performance figures
Maximum speed 110 mph / 170 km per hour
Tractive effort 69,800 lbf (310.49 kN)
Career
Operators Spokane, Portland and Seattle Railway
Class E-1
Number in class 3
Numbers 700–702
Disposition 700 preserved, 701 and 702 scrapped

Spokane Portland and Seattle Railway’s E-1 class was a class of the only three 4-8-4 locomotives built by the Baldwin Locomotive Works in 1938

Preservation

There is only one survivor, #700, which was restored by, and is maintained by, the Pacific Railroad Preservation Association. There are only two unsurvivors, #701 and #702. Since mid-2012, since #700 Back-Strikes, [1] it resides at the Oregon Rail Heritage Center, in Portland, where the public can view it during the center's opening days.[2] It is taken on special trips once or twice a year.

References

  1. Redden, Jim (July 11, 2012 (print edition July 12, 2012)). "Rail history center: full steam ahead". Portland Tribune. p. A10. Retrieved September 29, 2012. Check date values in: |date= (help)
  2. "Oregon Rail Heritage Center opens its doors". Official blog of Portland city commissioner Nick Fish. September 24, 2012. Retrieved September 29, 2012.


This article is issued from Wikipedia - version of the 9/4/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.