RWD 16
| RWD-16 | |
|---|---|
 | |
| RWD-16 in its initial shape | |
| Role | Sports plane |
| National origin | Poland |
| Manufacturer | DWL |
| Designer | RWD team |
| First flight | 1936 |
| Status | prototype |
| Primary user | Poland |
| Number built | 1 |
| Variants | RWD-16bis |
The RWD-16 was a Polish two-seat low-wing sports plane of 1936, constructed by the RWD team, that remained a prototype.
Development
The aircraft was designed in 1935 by Andrzej Anczutin of the RWD bureau, as a light and economical sports plane. The plane was a wooden low-wing monoplane, with two seats side-by-side in a closed cockpit, powered by 50 hp Walter Mikron I straight engine.[1]
The prototype was built and first flown in early 1936 (registration SP-AXY), funded by the Polish division of Osram factory. The plane did not appear a successful design, though. Test revealed lack of directional stability, therefore its rudder was much enlarged, the wings were fitted with fixed slats and a windshield was redesigned. It did not improve the situation much, and in 1937-1938 the prototype was rebuilt and fitted with stronger 60 hp Avia 3 engine in a lengthened nose, while the vertical stabilizer and rudder were made smaller. Most significant feature became a front windshield with a negative slope.[1]
After final changes, the prototype still was not satisfactory, but it served as a basis for the RWD-16bis design, which was a new, redesigned aircraft, produced as the RWD-21. The prototype RWD-16 was given then to a known touring aviator Zbigniew Babiński.[1]
Description
Wooden construction low-wing cantilever monoplane, conventional in layout, with a fixed landing gear and a closed cockpit. The fuselage was semi-monocoque, plywood-covered. Single-piece trapezoid wings with rounded tips, two-spar, plywood (in front) and canvas covered. Conventional cantilever empennage, plywood (fins) and canvas (elevators and rudder) covered. Two seats side-by-side, with twin controls, under a common canopy, with a fixed windshield. Conventional fixed landing gear with a rear skid.[1]
50 hp (37 kW) Walter Mikron I inline engine in front, with two-blade wooden propeller Szomański, 1.8 m diameter. In later variant, 60 hp (45 kW) Avia 3 inline engine was installed.
Specifications
Data from Glass, A. (1977), p. 323
General characteristics
- Crew: 1, pilot
- Capacity: 1, passenger or co-pilot
- Length: 7.51 m ()
- Wingspan: 11.8 m ()
- Height: 2.75 m ()
- Wing area: 15.3 m² ()
- Empty weight: 325 kg ()
- Useful load: 285 kg ()
- Loaded weight: 610 kg ()
- Powerplant: 1 × Avia 3 4-cylinder air-cooled inverted straight engine, 60 hp (kW)
Performance
- Maximum speed: 145 km/h
- Cruise speed: 120 km/h
- Stall speed: 67 km/h ()
- Range: 750 km ()
- Wing loading: 40 kg/m² ()
References
- Andrzej Glass: "Polskie konstrukcje lotnicze 1893-1939" (Polish aviation constructions 1893-1939), WKiŁ, Warsaw 1977, p. 322-323 (Polish)
External links
 |
Wikimedia Commons has media related to RWD-16. |