The Otto engine was a large stationary single-cylinder internal combustion four-stroke engine designed by Nikolaus Otto. It was a low-RPM machine, and only fired every other stroke due to the Otto cycle, also designed by Otto.
Three types of internal combustion engines were designed by German inventors Nikolaus Otto and his partner Eugen Langen. The models were a failed 1862 compression engine, an 1864 atmospheric engine, and the 1876 Otto cycle engine known today as the "Gasoline Engine." The engines were initially used for stationary installations, as Otto had no interest in transportation. Other makers such as Daimler perfected the Otto engine for transportation use.
Nikolaus August Otto as a young man was a traveling salesman for a grocery concern. In his travels he encountered the internal combustion engine built in Paris by Belgian expatriate Jean Joseph Etienne Lenoir. In 1860 Lenoir succeeded in creating a double-acting engine which ran on illuminating gas at 4% efficiency. The 18 liter Lenoir engine was able to produce only 2 horsepower.
In testing a replica of the Lenoir engine in 1861 Otto became aware of the effects of compression on the fuel charge. In 1862 Otto attempted to produce an engine to improve on the poor efficiency and reliability of the Lenoir engine. He tried to create an engine which would compress the fuel mixture prior to ignition, but failed, as that engine would run no more than a few minutes prior to its destruction. Many engineers were also trying to solve the problem with no success.
In 1864 Otto and Eugen Langen founded the first internal combustion engine production company NA Otto and Cie (NA Otto and Company). Otto and Cie succeeded in creating a successful atmospheric engine that same year.
By 1876 Otto and Langen succeeded in creating the first internal combustion engine that compressed the fuel mixture prior to combustion for far higher efficiency than any engine created to this time.
The first version of the atmospheric engine used a fluted column design which was the design of Eugen Langen. The atmospheric engine has its power stroke delivered upward using a rack and pinion to convert the piston's linear motion to rotary motion. The expansion ratio of this engine was much more effective than that of the 1860 Lenoir engine and gave the engine its superior efficiency.
The Lenoir engine was an engine that burned fuel without first trying to compress the fuel/mixture. The Otto/Langen atmospheric engine ran at 12% efficiency and produced .5 hp (0.37 kW; 0.51 PS) at 80 RPM. In competition at the 1867 World's Fair in Paris, it easily bested the efficiency of the Lenoir engine and won the Gold Medal, thus paving the way for production and sales which funded additional research.
The first version used a frame to stabilize the rack. This was soon dispensed with as the design was simplified. Later engines dispensed with the fluted cylinder as well. The atmospheric engine used a gas flame ignition system and was made in output sizes from 0.25 to 3 hp (0.19 to 2.24 kW; 0.25 to 3.04 PS).
When in 1872 N.A. Otto & Cie reorganized as Gasmotoren-Fabrik Deutz, management picked Daimler as factory manager, bypassing even Otto, and Daimler joined the company in August, taking Maybach with him as chief designer. While Daimler managed to improve production, the weakness in the Otto's vertical piston design, coupled to Daimler's stubborn insistence on atmospheric engines, led the company to an impasse.
For all its commercial success, with the company producing 634 engines a year by 1875, the Otto and Langen engine had hit a technical dead end: it produced only 3 hp (2.2 kW; 3.0 PS), yet required 10–13 ft (3.0–4.0 m) headroom to operate. In 1882, after producing 2,649 engines, the atmospheric engine production was discontinued. This was also the year that Gottlieb Daimler and Wilhelm Maybach left the company.
The Otto cycle
After 14 years of research and development Otto succeeded in creating the compressed charge internal combustion engine May 9, 1876. Otto found a way to layer the fuel mixture into the cylinder to cause the fuel to burn in a progressive, as opposed to explosive fashion. He referred to this as being a layered or stratified charge. This resulted in controlled combustion and a longer push of the piston in the cylinder rather than the explosion which destroyed all the engines attempted previously. The fuel was still illuminating gas just as Lenoir's and his own atmospheric engines had used.
This engine used four cycles in its creation of power. It is known now as the Otto Cycle engine. This is the same engine that was first attempted in 1862.
Otto turned his attention to the 4-stroke cycle largely due to the efforts of Franz Rings and Herman Schumm, brought into the company by Gottlieb Daimler. It is this engine (the Otto Silent Engine), and not the Otto & Langen engine, to which the Otto cycle refers. This was the first commercially successful engine to use in-cylinder compression (as patented by William Barnett in 1838). The Rings-Schumm engine appeared in autumn 1876 and was immediately successful.
The cylinder arrangement of the compression engine was horizontal. It featured a slider valve control with gas flame ignition, which overcame the problems that Lenoir could not overcome with electric ignition which was unreliable at that time. In the 15 years prior to the development of the Otto engine power output never exceeded 3 hp. In a few years after the Otto engine was developed engine power rose until it reached 1000 hp.
The Otto Cycle engine was eventually adopted to run on Ligroin and eventually gasoline, and many gases. During WWII Otto engines were run on more than 62 different fuels, such as wood gas, coal gas, propane, hydrogen, benzene, and many more. The engine is limited to light fuels. A later development of this engine, known as the Diesel engine can burn heavy fuels and oils.
Carburetor and low voltage Ignition
Deutz also developed the carburetor and a reliable low voltage ignition system in 1884. This allowed the use of liquid petroleum fuel for the first time and made the use of the engine in transportation feasible. This work was conducted in parallel to the work of Gottlieb Daimler and Wilhelm Maybach who also developed a carburetor which replaced the original hot tube ignition on the Daimler Reitwagen, and a magneto ignition system which formed the basis of the magneto of the Robert Bosch Corporation. Daimler continued the development of Otto's engine for transportation while Deutz switched to Diesel engines.
Loss of a patent
In 1886, the German patent office nullified the Deutz patent that would have run until 1891 due to the discovery of a previous patent for a four cycle engine by Frenchman Alphonse Beau de Rochas. Deutz was unable to show that his stratified charge induction system was unlike that described in the Rochas patent and lost his monopoly and 1 of his 25 patents. By 1889 more than 50 companies were manufacturing Otto design engines.
Spark plug firing
Otto engines were equipped with a number of different mechanism designs to trigger sparking. The Otto is one of the first engines to use a spark plug, which is a device that produces a small electric spark to ignite the fuel charge. This usually consisted of a pivoting trip-arm that briefly grabs a power switch lever and gives it a quick pull. The switch lever is then released and allowed to snap back to its original position in preparation for the next cycle. This system requires an external electric battery, ignition coil, and electric charging system similar to modern automobile engines.
Later Otto engines employed a small magneto directly on the engine. Rather than tripping a switch, the spark plug firing arm applies a quick rotation to the magneto rotor, which then snaps back under spring tension. This quick rotation of the magneto coil produces a very brief current flow that fires the spark plug and ignites the fuel. This design has the advantage of requiring no external battery, and is how modern portable gas engines operate, incorporating the magnet portion of the magneto into the flywheel. Modern portable engines excite the magneto with every flywheel rotation, and so use a cam-operated electric switch to prevent plug firing except for the power stroke of the engine (see wasted spark).
Engine speed regulation
This is a demonstration of how the speed regulation works in the Otto engine. The spinning balls are the centrifugal governor, and as the machine runs slower the small wheel moves to the left, inserting the rod into the nearby roller and pushing it up to trigger the intake of fuel to fire the engine for one revolution.
If the machine is under load and still running too slowly, the cam continues to stay inserted and makes the engine fire repeatedly for each ignition cycle. When the engine speed increases, the governor pulls the small wheel to the right and the machine coasts without injecting any fuel, though the spark plug continues to fire with no fuel in the cylinder.
This method of speed-control is often referred to as the Hit or Miss method because the engine mis-fires (for lack of fuel-mixture) on those power-strokes where the engine is running faster than the governed speed, but will hit (fire) on power strokes where the speed is too low. Note that no fuel is used on the mis-fire strokes.
Otto engines use a flowing water jacket around the cylinder wall, similar to modern engine cooling systems. The stationary Otto engines on display at the Western Minnesota Steam Threshers Reunion all share a single large heat radiator outside the building. This centralized distant heat dissipation system also helps to keep the engine building cool.
First use in transportation
Otto and his manager Gottlieb Daimler had a major disagreement on the future direction of the Otto engine. While Otto wanted to produce large engines for stationary applications Daimler wanted to produce engines small enough to be used in transportation. After a period of disagreement Daimler left Otto's employ and took Wilhelm Maybach with him. In 1883 Daimler and Maybach created a .5 hp engine that was small and efficient. In order to evade the patents that Otto held on the engine design, a pretense was found concerning a patent issued to Beau De Rochas in 1862, the same year that Otto failed to create his four cycle engine the first time. Those who were jealous of the Otto patents (there were 25 patents) had 1 patent overturned in Germany largely because the court failed to understand the significance of Otto's layered charge system which overcame the problems of explosive combustion which destroyed all engine designs previously.
Daimler always referred to his design as an explosion engine, to contrast it against Otto's engine and was able to evade paying royalties to Otto. In 1885 he and Maybach created an engine called the "Grandfather Clock" engine and built a two wheeled frame around it. This became the first Otto engined vehicle. Daimler's fourteen-year-old son Adolf was the first person to ride on this motorized bicycle which is the first internal combustion engined motor vehicle. The 1885 Daimler/Maybach Petroleum Reitwagen (Riding Car) was the first motorcycle (and the first motor vehicle) using an internal combustion engine. While Deutz continued to produce large stationary engines Daimler moved onto boats, airships, locomotives, automobiles, trucks, and other transportation uses. Deutz is the world's oldest engine producer. Daimler, which became Daimler-Benz, is the world's oldest automobile manufacturer.
Daimler-Benz produced this video for the 125th anniversary of the creation of the first motor vehicle which Daimler called the "Petroleum Reitwagen." It used a hot tube ignition specifically because the electrical systems of that era were unreliable. This engine ran on the fuel Ligroin, as did all vehicles until well past the year 1905. Daimler and Maybach founded a company known as Daimler Motorenwerke Gesellschaft which later merged with Benz to form Daimler-Benz, known also as Mercedes-Benz. The Damiler/Maybach Reitwagen reproduction being run
Today Otto's company Deutz is one of the largest makers of heavy duty vehicles in the world. Daimler-Benz is one of the largest and most respected makers of luxury automobiles in the world. Virtually all of the world's makers of automobiles produce vehicles using Otto cycle engines which are so ubiquitous as to be referred to as gasoline engines.
- , Nikolaus August Otto: Inventor Of The Internal Combustion Engine.
- , The History of Daimler-Benz.
- The Daimler-Benz Museum, Cannstatt, Germany.
- , NA Otto Museum.
- , Deutz AG.
- Wise, David Burgess. "Daimler: Founder of the Four-Wheeler", in Northey, Tom, ed. World of Automobiles (London: Orbis, 1974), Volume 5, p.482.
- Wise, p.482.
- Otto Museum Website
|Wikimedia Commons has media related to Otto engines.|
- Photograph of Jean Joseph Etienne Lenoir
- Encyclopædia Britannica article on Etienne Lenoir
- Thinkquest Otto Engine
- Otto Museum
- Nikolaus Otto
- Photograph of Nikolaus August Otto
- Deutz AG
- History of Otto and Cie