np-chart

np-chart
Originally proposed by	Walter A. Shewhart
Process observations
Rational subgroup size	n > 1
Measurement type	Number nonconforming per unit
Quality characteristic type	Attributes data
Underlying distribution	Binomial distribution
Performance
Size of shift to detect	≥ 1.5σ
Process variation chart
Not applicable
Process mean chart

Center line	$n{\bar p}={\frac {\sum _{{i=1}}^{m}\sum _{{j=1}}^{n}{\begin{cases}1&{\mbox{if }}x_{{ij}}{\mbox{ defective}}\\0&{\mbox{otherwise}}\end{cases}}}{m}}$
Control limits	$n{\bar p}\pm 3{\sqrt {n{\bar p}(1-{\bar p})}}$
Plotted statistic	$n{\bar p}_{i}=\sum _{{j=1}}^{n}{\begin{cases}1&{\mbox{if }}x_{{ij}}{\mbox{ defective}}\\0&{\mbox{otherwise}}\end{cases}}$

In statistical quality control, the np-chart is a type of control chart used to monitor the number of nonconforming units in a sample. It is an adaptation of the p-chart and used in situations where personnel find it easier to interpret process performance in terms of concrete numbers of units rather than the somewhat more abstract proportion.^[1]

The np-chart differs from the p-chart in only the three following aspects:

The control limits are $n{\bar {p}}\pm 3{\sqrt {n{\bar {p}}(1-{\bar {p}})}}$ , where n is the sample size and $\bar p$ is the estimate of the long-term process mean established during control-chart setup.
The number nonconforming (np), rather than the fraction nonconforming (p), is plotted against the control limits.
The sample size, $n$ , is constant.

References

↑ Montgomery, Douglas (2005). Introduction to Statistical Quality Control. Hoboken, New Jersey: John Wiley & Sons, Inc. p. 279. ISBN 978-0-471-65631-9. OCLC 56729567.

This article is issued from Wikipedia - version of the 9/5/2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.

np-chart

See also

References