Lanthanum

Lanthanum,  57La
General properties
Name, symbol lanthanum, La
Pronunciation /ˈlænθənəm/
Appearance silvery white
Lanthanum in the periodic table


La

Ac
bariumlanthanumcerium
Atomic number (Z) 57
Group, block group n/a, f-block
Period period 6
Element category   lanthanide, sometimes considered a transition metal
Standard atomic weight (±) (Ar) 138.90547(7)[1]
Electron configuration [Xe] 5d1 6s2
per shell
2, 8, 18, 18, 9, 2
Physical properties
Phase solid
Melting point 1193 K (920 °C, 1688 °F)
Boiling point 3737 K (3464 °C, 6267 °F)
Density near r.t. 6.162 g/cm3
when liquid, at m.p. 5.94 g/cm3
Heat of fusion 6.20 kJ/mol
Heat of vaporization 400 kJ/mol
Molar heat capacity 27.11 J/(mol·K)

Vapor pressure (extrapolated)

P (Pa) 1 10 100 1 k 10 k 100 k
at T (K) 2005 2208 2458 2772 3178 3726
Atomic properties
Oxidation states 3, 2, 1 (a strongly basic oxide)
Electronegativity Pauling scale: 1.10
Ionization energies 1st: 538.1 kJ/mol
2nd: 1067 kJ/mol
3rd: 1850.3 kJ/mol
Atomic radius empirical: 187 pm
Covalent radius 207±8 pm
Miscellanea
Crystal structure

double hexagonal close-packed (dhcp)

Double hexagonal close packed crystal structure for lanthanum
Speed of sound thin rod 2475 m/s (at 20 °C)
Thermal expansion α, poly: 12.1 µm/(m·K) (at r.t.)
Thermal conductivity 13.4 W/(m·K)
Electrical resistivity α, poly: 615 nΩ·m (at r.t.)
Magnetic ordering paramagnetic[2]
Young's modulus α form: 36.6 GPa
Shear modulus α form: 14.3 GPa
Bulk modulus α form: 27.9 GPa
Poisson ratio α form: 0.280
Mohs hardness 2.5
Vickers hardness 360–1750 MPa
Brinell hardness 350–400 MPa
CAS Number 7439-91-0
History
Discovery Carl Gustaf Mosander (1839)
Most stable isotopes of lanthanum
iso NA half-life DM DE (MeV) DP
137La syn 6×104 y ε 0.600 137Ba
138La 0.089% 1.05×1011 y ε 1.737 138Ba
β 1.044 138Ce
139La 99.911% is stable with 82 neutrons

Lanthanum is a soft, ductile, silvery-white metallic chemical element with symbol La and atomic number 57. It tarnishes rapidly when exposed to air and is soft enough to be cut with a knife. It is the eponym of the lanthanide series, a group of 15 similar elements between lanthanum and lutetium in the periodic table, of which lanthanum is the first and the prototype. It is also sometimes considered the first element of the 6th-period transition metals and is traditionally counted among the rare earth elements. The usual oxidation state is +3. Lanthanum has no biological role and is not very toxic.

Lanthanum usually occurs together with cerium and the other rare earth elements. Lanthanum was first found by the Swedish chemist Carl Gustav Mosander in 1839 as an impurity in cerium nitrate – hence the name lanthanum, from the Ancient Greek λανθάνειν (lanthanein), meaning "to lie hidden". Although it is classified as a rare earth element, lanthanum is the 28th most abundant element in the Earth's crust, almost three times as abundant as lead. In minerals such as monazite and bastnäsite, lanthanum composes about a quarter of the lanthanide content.[3] It is extracted from those minerals by a process of such complexity that pure lanthanum metal was not isolated until 1923.

Lanthanum compounds have numerous applications as catalysts, additives in glass, carbon arc lamps for studio lights and projectors, ignition elements in lighters and torches, electron cathodes, scintillators, GTAW electrodes, and other things. Lanthanum carbonate is used as a phosphate binder cases of renal failure.

Characteristics

Physical

Lanthanum is the first element and prototype of the lanthanide series.[lower-alpha 1] In the periodic table, it appears to the right of the alkaline earth metal barium and to the left of the lanthanide cerium. Lanthanum is often considered to be a group 3 element, along with its lighter congeners scandium and yttrium and its heavier congener, the radioactive actinium,[5] although this classification is sometimes disputed. Similarly to scandium, yttrium, and actinium, the 57 electrons of a lanthanum atom are arranged in the configuration [Xe]5d16s2, with three valence electrons outside the noble gas core. In chemical reactions, lanthanum almost always gives up these three valence electrons from the 5d and 6s subshells to form the +3 oxidation state, achieving the stable configuration of the preceding noble gas xenon.[6] Some lanthanum(II) compounds are also known, but they are much less stable.[7]

Among the lanthanides, lanthanum is exceptional as it does not have any 4f electrons; indeed, the sudden contraction and lowering of energy of the 4f orbital that is important for the chemistry of the lanthanides only begins to happen at cerium. Thus it is only very weakly paramagnetic, unlike the strongly paramagnetic later lanthanides (with the exceptions of the last two, ytterbium and lutetium, where the 4f shell is completely full).[8] Furthermore, since the melting points of the trivalent lanthanides are related to the extent of hybridisation of the 6s, 5d, and 4f electrons, lanthanum has the second-lowest (after cerium) melting point among all the lanthanides: 920 °C.[9] The lanthanides become harder as the series is traversed: as expected, lanthanum is a soft metal. Lanthanum has a relatively high resistivity of 615 nΩm at room temperature; in comparison, the value for the good conductor aluminium is only 26.50 nΩm.[10][11] Lanthanum is the least volatile of the lanthanides.[12] Like most of the lanthanides, lanthanum has a hexagonal crystal structure at room temperature. At 310 °C, lanthanum changes to a face-centered cubic structure, and at 865 °C, it changes to a body-centered cubic structure.[11]

Chemical

As expected from periodic trends, lanthanum has the largest atomic radius of the lanthanides and the stable group 3 elements. Hence, it is the most reactive among them, tarnishing slowly in air and burning readily to form lanthanum(III) oxide, La2O3, which is almost as basic as calcium oxide.[13] A centimeter-sized sample of lanthanum will corrode completely in a year as its oxide spalls off like iron rust, instead of forming a protective oxide coating like aluminium and lanthanum's lighter congeners scandium and yttrium.[14] Lanthanum reacts with the halogens at room temperature to form the trihalides, and upon warming will form binary compounds with the nonmetals nitrogen, carbon, sulfur, phosphorus, boron, selenium, silicon and arsenic.[6][7] Lanthanum reacts slowly with water to form lanthanum(III) hydroxide, La(OH)3.[15] In dilute sulfuric acid, lanthanum readily forms the aquated tripositive ion [La(H2O)9]3+: this is colorless in aqueous solution since La3+ has no f electrons.[15] Lanthanum is the strongest and hardest base among the lanthanides and group 3 elements, which is again expected from its being the largest of them.[16]

Isotopes

Main article: Isotopes of lanthanum

Naturally occurring lanthanum is made up of two isotopes, the stable 139La and the primordial long-lived radioisotope 138La. 139La is by far the most abundant, making up 99.910% of natural lanthanum: it is produced in the s-process (slow neutron capture, which occurs in low- to medium-mass stars) and the r-process (rapid neutron capture, which occurs in core-collapse supernovae).[17] The very rare isotope 138La is one of the few primordial odd-odd nuclei, with a long half-life of 1.05×1011 years: it is one of the proton-rich p-nuclei which cannot be produced in the s- or r-processes. 138La, along with the even rarer 180mTa, is produced in the ν-process, where neutrinos interact with stable nuclei.[18] All other lanthanum isotopes are synthetic: with the exception of 137La with a half-life of about 60,000 years, all of them have half-lives less than a day, and most have half-lives less than a minute. The isotopes 139La and 140La occur as fission products of uranium.[17]

Position in the periodic table

Traditionally, from the 1940s, lanthanum has been placed under scandium and yttrium in group 3 of the periodic table, as its differentiating electron from the previous element goes into a d-orbital. This results in a consistent set of electron configurations in group 3 (Sc: [Ar]3d14s2; Y: [Kr]4d15s2; La: [Xe]5d16s2). However, this position has sometimes been disputed, on the grounds that yttrium and to a lesser extent scandium are closer in their chemical properties to lutetium than lanthanum. Indeed, early techniques on separating the rare earths relied on the distinction between the early lanthanides in the cerium group (whose sodium double sulfates dissolve in water with difficulty) and the late ones (as well as yttrium) in the yttrium group (whose sodium double sulfates are very water-soluble), prompting some researchers in the 1920s and 1930s to place lutetium under yttrium instead. Since the differentiating electron between ytterbium and lutetium also goes into a d-orbital, both lutetium and lanthanum appear by this argument as equally valid candidates for being the third member of group 3.[19]

Many of the discrepancies between lanthanum and the lighter group 3 elements can simply be explained by its larger size, as expected from periodic trends, as it precedes the lanthanide contraction that makes the early period 6 transition metals so similar to their period 5 homologs.[20] This phenomenon, based on the poor shielding of nuclear charge by the 4f electrons that are added across the lanthanide series, results in a decrease of ionic and atomic radii across the lanthanide series, causing the early period 6 transition metals (just after the lanthanides) until about rhenium to be very similar to their period 5 homologs. This same effect makes yttrium more similar to lutetium ([Xe]4f145d16s2) than lanthanum. However, scandium still shows many differences from lutetium because it is even smaller, and in any case the similarity of yttrium is more generally to all of the late lanthanides from gadolinium onward, especially holmium which has almost the same ionic radius.[21] Unlike all the other lanthanides, no lanthanum ions have any electrons in f-orbitals (La+: [Xe]5d2; La2+: [Xe]5d1; La3+: [Xe]),[22] and in lanthanum metal the f-orbitals are not involved in metallic bonding. This casts some doubt on lanthanum's placement in the f-block, as would be suggested by a table placing lutetium in group 3.[23]

The trends going down from scandium and yttrium to lanthanum tend to be more similar to those going down groups 1 and 2 in the periodic table, while those going down from scandium and yttrium to lutetium tend to be more similar to those in the early transition metals. Since Sc3+, Y3+, and La3+ still have a low enough charge for their compounds to be predominantly ionic, unlike Ti4+, Zr4+, and Hf4+, it has been argued that lanthanum and the rest of group 3 should be considered at best atypical transition metals, as their chemistry is focused on the predominantly ionic +3 state and they have a low ability to form coordination compounds or organometallic compounds. Indeed, lanthanum is a strongly electropositive metal, comparable to calcium in electropositivity.[20] The rare earth metals in general are more similar in reactivity to the alkaline earth metals that immediately precede them than to the transition metals proper which follow them.[21]

Compounds

Lanthanum oxide is a white solid that can be prepared by direct reaction of its constituent elements. Due to the large size of the La3+ ion, La2O3 adopts a hexagonal 7-coordinate structure that changes to the 6-coordinate structure of scandium oxide (Sc2O3) and yttrium oxide (Y2O3) at high temperature. When it reacts with water, lanthanum hydroxide is formed: a lot of heat is evolved in the reaction and a hissing sound is heard. Lanthanum hydroxide will react with atmospheric carbon dioxide to form the basic carbonate.[20]

Lanthanum fluoride is insoluble in water and can be used as a qualitative test for the presence of La3+. The heavier halides are all very soluble deliquescent compounds. The anhydrous halides are produced by direct reaction of their elements, as heating the hydrates causes hydrolysis: for example, heating hydrated LaCl3 produces LaOCl.[20]

Lanthanum reacts exothermically with hydrogen to produce the dihydride LaH2, a black, pyrophoric, brittle, conducting compound with the calcium fluoride structure.[24] This is a non-stoichiometric compound, and further absorption of hydrogen is possible, with a concomitant loss of electrical conductivity, until the more salt-like LaH3 is reached.[20] Like LaI2 and LaI, LaH2 is probably an electride compound.[20]

Due to the large ionic radius and great electropositivity of La3+, there is not much covalent contribution to its bonding and hence it has a limited coordination chemistry, like yttrium and the other lanthanides.[25] Lanthanum oxalate does not dissolve very much in alkali-metal oxalate solutions, and [La(acac)3(H2O)2] decomposes around 500 °C. Oxygen is the most common donor atom in lanthanum complexes, which are mostly ionic and often have high coordination numbers over 6: 8 is the most characteristic, forming square antiprismatic and dodecadeltahedral structures. These high-coordinate species, reaching up to coordination number 12 with the use of chelating ligands such as in La2(SO4)3·9H2O, often have a low degree of symmetry because of stereo-chemical factors.[25]

Lanthanum chemistry tends not to involve π bonding due to the electron configuration of the element: thus its organometallic chemistry is quite limited. The best characterized organolanthanum compounds are the cyclopentadienyl complex La(C5H5)3, which is produced by reacting anhydrous LaCl3 with NaC5H5 in tetrahydrofuran, and its methyl-substituted derivatives.[26]

History

Carl Gustaf Mosander, discoverer of lanthanum

In 1751, the Swedish mineralogist Axel Fredrik Cronstedt discovered a heavy mineral from the mine at Bastnäs, later named cerite. Thirty years later, the fifteen-year-old Vilhelm Hisinger, from the family owning the mine, sent a sample of it to Carl Scheele, who did not find any new elements within. In 1803, after Hisinger had become an ironmaster, he returned to the mineral with Jöns Jacob Berzelius and isolated a new oxide which they named ceria after the dwarf planet Ceres, which had been discovered two years earlier.[27] Ceria was simultaneously independently isolated in Germany by Martin Heinrich Klaproth.[28] Between 1839 and 1843, ceria was shown to be a mixture of oxides by the Swedish surgeon and chemist Carl Gustaf Mosander, who lived in the same house as Berzelius: he separated out two other oxides which he named lanthana and didymia.[29] He partially decomposed a sample of cerium nitrate by roasting it in air and then treating the resulting oxide with dilute nitric acid.[30] Since lanthanum's properties differed only slightly from those of cerium, and occurred along with it in its salts, he named it from the Ancient Greek λανθάνειν [lanthanein] (lit. to lie hidden).[28] Relatively pure lanthanum metal was first isolated in 1923.[7]

Occurrence and production

Lanthanum is the third-most abundant of all the lanthanides, making up 39 mg/kg of the Earth's crust, behind neodymium at 41.5 mg/kg and cerium at 66.5 mg/kg. It is almost three times as abundant as lead in the Earth's crust.[31] Despite being among the so-called "rare earth metals", lanthanum is thus not rare at all, but it is historically so named because it is rarer than "common earths" such as lime and magnesia, and historically only a few deposits were known. Lanthanum is considered as a rare earth metal because the process to mine it is difficult, time-consuming and expensive.[7]

The La3+ ion is similarly-sized to the early lanthanides of the cerium group (those up to samarium and europium) that immediately follow in the periodic table, and hence it tends to occur along with them in phosphate, silicate and carbonate minerals, such as monazite (MIIIPO4) and bastnäsite (MIIICO3F), where M refers to all the rare earth metals except scandium and the radioactive promethium (mostly Ce, La, and Y).[32] Bastnäsite is usually lacking in thorium and the heavy lanthanides, and the purification of the light lanthanides from it is less involved. The ore, after being crushed and ground, is first treated with hot concentrated sulfuric acid, evolving carbon dioxide, hydrogen fluoride, and silicon tetrafluoride: the product is then dried and leached with water, leaving the early lanthanide ions, including lanthanum, in solution.[33]

The procedure for monazite, which usually contains all the rare earths as well as thorium, is more involved. Monazite, because of its magnetic properties, can be separated by repeated electromagnetic separation. After separation, it is treated with hot concentrated sulfuric acid to produce water-soluble sulfates of rare earths. The acidic filtrates are partially neutralized with sodium hydroxide to pH 3-4. Thorium precipitates out of solution as hydroxide and is removed. After that, the solution is treated with ammonium oxalate to convert rare earths to their insoluble oxalates. The oxalates are converted to oxides by annealing. The oxides are dissolved in nitric acid that excludes one of the main components, cerium, whose oxide is insoluble in HNO3. Lanthanum is separated as a double salt with ammonium nitrate by crystallization. This salt is relatively less soluble than other rare earth double salts and therefore stays in the residue.[7] Care must be taken when handling some of the residues as they contain 228Ra, the daughter of 232Th, which is a strong gamma emitter.[33] Lanthanum is relatively easy to extract as it has only one neighbouring lanthanide, cerium, which can be removed by making use of its ability to be oxidised to the +4 state; thereafter, lanthanum may be separated out by the historical method of fractional crystallization of La(NO3)3·2NH4NO3·4H2O, or by ion-exchange techniques when higher purity is desired.[33]

Lanthanum metal is obtained from its oxide by heating it with ammonium chloride or fluoride and hydrofluoric acid at 300-400 °C to produce the chloride or fluoride:[7]

La2O3 + 6 NH4Cl → 2 LaCl3 + 6 NH3 + 3 H2O

This is followed by reduction with alkali or alkaline earth metals in vacuum or argon atmosphere:[7]

LaCl3 + 3 Li → La + 3 LiCl

Also, pure lanthanum can be produced by electrolysis of molten mixture of anhydrous LaCl3 and NaCl or KCl at elevated temperatures.[7]

Applications

A Coleman white gas lantern mantle burning at full brightness

The first historical application of lanthanum was in gas lantern mantles. Carl Auer von Welsbach used a mixture of 60% magnesium oxide, 20% lanthanum oxide, and 20% yttrium oxide, which he called Actinophor and patented in 1885. The original mantles gave a green-tinted light and were not very successful, and his first company, which established a factory in Atzgersdorf in 1887, failed in 1889.[34]

Modern uses of lanthanum include:

LaB
6
hot cathode
Comparison of infrared transmittance of ZBLAN glass and silica
As most hybrid cars use nickel-metal hydride batteries, massive quantities of lanthanum are required for the production of hybrid automobiles. A typical hybrid automobile battery for a Toyota Prius requires 10 to 15 kilograms (22 to 33 lb) of lanthanum. As engineers push the technology to increase fuel efficiency, twice that amount of lanthanum could be required per vehicle.[37][38]

Biological role

Lanthanum has no known biological role in humans. The element is very poorly absorbed after oral administration and when injected its elimination is very slow. Lanthanum carbonate (Fosrenol) was approved as a phosphate binder to absorb excess phosphate in cases of end stage renal disease.[51]

While lanthanum has pharmacological effects on several receptors and ion channels, its specificity for the GABA receptor is unique among trivalent cations. Lanthanum acts at the same modulatory site on the GABA receptor as zinc, a known negative allosteric modulator. The lanthanum cation La3+ is a positive allosteric modulator at native and recombinant GABA receptors, increasing open channel time and decreasing desensitization in a subunit configuration dependent manner.[54]

Lanthanum is an essential cofactor for the methanol dehydrogenase of the methanotrophic bacterium Methylacidiphilum fumariolicum SolV, although the great chemical similarity of the lanthanides means that it may be substituted with cerium, praseodymium, or neodymium without ill effects, and with the smaller samarium, europium, or gadolinium giving no side effects other than slower growth.[55]

Precautions

Lanthanum has a low to moderate level of toxicity and should be handled with care. The injection of lanthanum solutions produces hyperglycemia, low blood pressure, degeneration of the spleen and hepatic alterations.[56] The application in carbon arc light led to the exposure of people to rare earth element oxides and fluorides, which sometimes led to pneumoconiosis.[57][58] As the La3+ ion is similar in size to the Ca2+ ion, it is sometimes used as an easily traced substitute for the latter in medical studies.[59] Lanthanum, like the other lanthanides, is known to affect human metabolism, lowering cholesterol levels, blood pressure, appetite, and risk of blood coagulation. When injected into the brain, it acts as a painkiller, similarly to morphine and other opiates, though the mechanism behind this is still unknown.[59]

Notes

  1. Lanthanum is not always considered to be a lanthanide, partly because the term "lanthanide" means "like lanthanum" and therefore logically cannot include lanthanum itself, and also because lanthanum lacks the 4f electrons characteristic of the rest of the lanthanide series. This use of the term "lanthanide" is thus limited to the fourteen elements between cerium and lutetium inclusive.[4]

References

  1. Standard Atomic Weights 2013. Commission on Isotopic Abundances and Atomic Weights
  2. Lide, D. R., ed. (2005). "Magnetic susceptibility of the elements and inorganic compounds". CRC Handbook of Chemistry and Physics (PDF) (86th ed.). Boca Raton (FL): CRC Press. ISBN 0-8493-0486-5.
  3. "Monazite-(Ce) Mineral Data". Webmineral. Retrieved 10 July 2016.
  4. Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 1227. ISBN 0-08-037941-9.
  5. Greenwood and Earnshaw, p. 1102
  6. 1 2 Greenwood and Earnshaw, p. 1106
  7. 1 2 3 4 5 6 7 8 9 Patnaik, Pradyot (2003). Handbook of Inorganic Chemical Compounds. McGraw-Hill. pp. 444–446. ISBN 0-07-049439-8. Retrieved 2009-06-06.
  8. Cullity, B. D. and Graham, C. D. (2011) Introduction to Magnetic Materials, John Wiley & Sons, ISBN 9781118211496
  9. Krishnamurthy, Nagaiyar and Gupta, Chiranjib Kumar (2004) Extractive Metallurgy of Rare Earths, CRC Press, ISBN 0-415-33340-7
  10. Greenwood and Earnshaw, p. 1429
  11. 1 2 3 4 5 6 Lide, D. R., ed. (2005). CRC Handbook of Chemistry and Physics (86th ed.). Boca Raton (FL): CRC Press. ISBN 0-8493-0486-5.
  12. The Radiochemistry of the Rare Earths, Scandium, Yttrium, and Actinium
  13. Greenwood and Earnshaw, p. 1105–7
  14. "Rare-Earth Metal Long Term Air Exposure Test". Retrieved 2009-08-08.
  15. 1 2 "Chemical reactions of Lanthanum". Webelements. Retrieved 2009-06-06.
  16. Greenwood and Earnshaw, p. 1434
  17. 1 2 Audi, Georges; Bersillon, O.; Blachot, J.; Wapstra, A.H. (2003). "The NUBASE Evaluation of Nuclear and Decay Properties". Nuclear Physics A. Atomic Mass Data Center. 729: 3–128. Bibcode:2003NuPhA.729....3A. doi:10.1016/j.nuclphysa.2003.11.001.
  18. S. E. Woosley, D. H. Hartmann, R. D. Hoffman, W. C. Haxton: The ν-process. In: The Astrophysical Journal, Vol. 356, 1990, p. 272-301. (doi:10.1086/168839)
  19. William B. Jensen (1982). "The Positions of Lanthanum (Actinium) and Lutetium (Lawrencium) in the Periodic Table". J. Chem. Educ. 59 (8): 634–636. doi:10.1021/ed059p634.
  20. 1 2 3 4 5 6 Greenwood and Earnshaw, p. 1107–8
  21. 1 2 Cotton, Simon (2006). Lanthanide and Actinide Chemistry. John Wiley & Sons Ltd.
  22. Extractive Metallurgy of Rare Earths by C. K. Gupta and N. Krishnamurthy
  23. The Theory of Phase Formation in Rare Earth Metal Systems by K. A. Gschneider
  24. Fukai, Y (2005). The Metal-Hydrogen System, Basic Bulk Properties, 2d edition. Springer. ISBN 978-3-540-00494-3.
  25. 1 2 Greenwood and Earnshaw, pp. 1108–9
  26. Greenwood and Earnshaw, p. 1110
  27. "The Discovery and Naming of the Rare Earths". Elements.vanderkrogt.net. Retrieved 23 June 2016.
  28. 1 2 Greenwood and Earnshaw, p. 1424
  29. Weeks, Mary Elvira (1932). "The Discovery of the Elements: XI. Some Elements Isolated with the Aid of Potassium and Sodium:Zirconium, Titanium, Cerium and Thorium". The Journal of Chemical Education. 9 (7): 1231–1243. Bibcode:1932JChEd...9.1231W. doi:10.1021/ed009p1231.
  30. See:
    • (Berzelius) (1839) "Nouveau métal" (New metal), Comptes rendus, 8 : 356-357. From p. 356: "L'oxide de cérium, extrait de la cérite par la procédé ordinaire, contient à peu près les deux cinquièmes de son poids de l'oxide du nouveau métal qui ne change que peu les propriétés du cérium, et qui s'y tient pour ainsi dire caché. Cette raison a engagé M. Mosander à donner au nouveau métal le nom de Lantane." (The oxide of cerium, extracted from cerite by the usual procedure, contains almost two fifths of its weight in the oxide of the new metal, which differs only slightly from the properties of cerium, and which is held in it so to speak "hidden". This reason motivated Mr. Mosander to give to the new metal the name Lantane.)
    • (Berzelius) (1839) "Latanium — a new metal," Philosophical Magazine, new series, 14 : 390-391.
  31. "It's Elemental — The Periodic Table of Elements". Jefferson Lab. Archived from the original on 29 April 2007. Retrieved 2007-04-14.
  32. Greenwood and Earnshaw, p. 1103
  33. 1 2 3 Greenwood and Earnshaw, p. 1426–9
  34. "Lighting" (11th ed.). Encyclopædia Britannica (1911). Retrieved 2009-06-06.
  35. "Inside the Nickel Metal Hydride Battery" (PDF). Retrieved 2009-06-06.
  36. Tliha, M; Mathlouthi, H; Lamloumi, J; Percheronguegan, A (2007). "AB5-type hydrogen storage alloy used as anodic materials in Ni-MH batteries". Journal of Alloys and Compounds. 436: 221. doi:10.1016/j.jallcom.2006.07.012.
  37. "As hybrid cars gobble rare metals, shortage looms". Reuters 2009-08-31. 2009-08-31.
  38. Bauerlein, P; Antonius, C; Loffler, J; Kumpers, J (2008). "Progress in high-power nickel–metal hydride batteries". Journal of Power Sources. 176 (2): 547. doi:10.1016/j.jpowsour.2007.08.052.
  39. Uchida, H (1999). "Hydrogen solubility in rare earth based hydrogen storage alloys". International Journal of Hydrogen Energy. 24 (9): 871. doi:10.1016/S0360-3199(98)00161-X.
  40. C. R. Hammond (2000). The Elements, in Handbook of Chemistry and Physics (81st ed.). CRC press. ISBN 0-8493-0481-4.
  41. Jason D. Sommerville & Lyon B. King. "Effect of Cathode Position on Hall-Effect Thruster Performance and Cathode Coupling Voltage" (PDF). 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 8–11 July 2007, Cincinnati, OH. Archived from the original (PDF) on July 20, 2011. Retrieved 2009-06-06.
  42. Harrington, James A. "Infrared Fiber Optics" (PDF). Rutgers University. Archived from the original (PDF) on 2010-08-02.
  43. "BrilLanCe-NxGen" (PDF). Retrieved 2009-06-06.
  44. Hendrick, James B. (1985). "Rare Earth Elements and Yttrium". Mineral Facts and Problems. Bulletin 675. Bureau of Mines. p. 655.
  45. Kim, K; Shim, Kwang Bo (2003). "The effect of lanthanum on the fabrication of ZrB2–ZrC composites by spark plasma sintering". Materials Characterization. 50: 31. doi:10.1016/S1044-5803(03)00055-X.
  46. Pool Care Basics. pp. 25–26.
  47. Howard B. Cary (1995). Arc welding automation. CRC Press. p. 139. ISBN 0-8247-9645-4.
  48. Larry Jeffus. (2003). "Types of Tungsten". Welding : principles and applications. Clifton Park, N.Y.: Thomson/Delmar Learning. p. 350. ISBN 978-1-4018-1046-7.
  49. C. K. Gupta; Nagaiyar Krishnamurthy (2004). Extractive metallurgy of rare earths. CRC Press. p. 441. ISBN 0-415-33340-7.
  50. S. Nakai; A. Masuda; B. Lehmann (1988). "La-Ba dating of bastnaesite" (PDF). American Mineralogist. 7: 1111.
  51. 1 2 "FDA approves Fosrenol(R) in end-stage renal disease (ESRD) patients". 28 October 2004. Retrieved 2009-06-06.
  52. Chau YP; Lu KS (1995). "Investigation of the blood-ganglion barrier properties in rat sympathetic ganglia by using lanthanum ion and horseradish peroxidase as tracers". Acta Anatomica. 153 (2): 135–144. doi:10.1159/000313647. ISSN 0001-5180. PMID 8560966.
  53. Hagheseresht; Wang, Shaobin; Do, D.D. (2009). "A novel lanthanum-modified bentonite, Phoslock, for phosphate removal from wastewaters". Applied Clay Science. 46 (4): 369–375. doi:10.1016/j.clay.2009.09.009.
  54. Boldyreva, A. A. (2005). "Lanthanum Potentiates GABA-Activated Currents in Rat Pyramidal Neurons of CA1 Hippocampal Field". Bulletin of Experimental Biology and Medicine. 140 (4): 403–5. doi:10.1007/s10517-005-0503-z. PMID 16671565.
  55. Pol, Arjan; Barends, Thomas R. M.; Dietl, Andreas; Khadem, Ahmad F.; Eygensteyn, Jelle; Jetten, Mike S. M.; Op Den Camp, Huub J. M. (2013). "Rare earth metals are essential for methanotrophic life in volcanic mudpots". Environmental Microbiology. 16 (1): 255–64. doi:10.1111/1462-2920.12249. PMID 24034209.
  56. Pof. Dr. M. Zafar Iqbal. Elements in Health and Disease. Dr. Ahsan Iqbal. pp. 23–. GGKEY:KEU6L0DDWZJ.
  57. Dufresne, A; Krier, G; Muller, J; Case, B; Perrault, G (1994). "Lanthanide particles in the lung of a printer". Science of the Total Environment. 151 (3): 249–252. doi:10.1016/0048-9697(94)90474-X. PMID 8085148.
  58. Waring, PM; Watling, RJ (1990). "Rare earth deposits in a deceased movie projectionist. A new case of rare earth pneumoconiosis". The Medical journal of Australia. 153 (11–12): 726–30. PMID 2247001.
  59. 1 2 Emsley, John (2011). Nature's building blocks: an A-Z guide to the elements. Oxford University Press. pp. 266–77. ISBN 9780199605637.

Bibliography

Further reading

This article is issued from Wikipedia - version of the 12/3/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.