LNWR Dreadnought Class

LNWR Dreadnought class

Type and origin
Power type Steam
Designer F. W. Webb
Builder Crewe Works
Serial number 2975–2804, 2886–2905, 3012–3021
Build date 1884–1888
Total produced 40
Specifications
Configuration 2-2-2-0
UIC class 1AA n3v
Gauge 4 ft 8 12 in (1,435 mm)
Leading dia. 3 ft 6 in (1.067 m) + tyres
Driver dia. 6 ft 0 in (1.829 m) + tyres
Wheelbase:
  Engine
18 ft 1 in (5.51 m)
  Leading 8 ft 5 in (2.57 m)
  Drivers 9 ft 8 in (2.95 m)
Loco weight 43 long tons (44 t)
Boiler:
  Diameter 4 ft 2 in (1.27 m)
  Tube plates 11 ft 0 in (3.35 m)
Boiler pressure 175 lbf/in2 (1.21 MPa)
Heating surface 1,401.5 sq ft (130.20 m2)
Cylinders Three: two HP (outside), one LP (inside)
High-pressure cylinder 14 in × 24 in (356 mm × 610 mm)
Low-pressure cylinder 30 in × 24 in (762 mm × 610 mm)
Valve gear Joy
Career
Operators London and North Western Railway
Scrapped December 1903 – July 1905
Disposition All scrapped

The LNWR Dreadnought class was a class of 40 passenger three-cylinder compound 2-2-2-0 locomotives designed by F. W. Webb for the London and North Western Railway, and manufactured by them in their Crewe Works between 1884 and 1888.

Design

The design featured a boiler pressed to 175 lbf/in2 (1.21 MPa) delivering saturated steam to two outside 14-inch (356 mm) high-pressure cylinders, which exhausted to one 30-inch (762 mm) low-pressure cylinder inside the frames. All three cylinders had a stroke of 24 inches (610 mm); the high-pressure cylinders drove the rear wheels, while the low-pressure drove the leading driving wheels. As the two pairs of driving wheels were not connected, the locomotives were "duplex drive" or "double-singles".

They were a development of Webb's Experiment class; they had larger boilers and smaller driving wheels, and while the Joy valve gear for the HP and LP cylinders could still be independently adjusted, it was now also possible to reverse both sets simultaneously. The inside valve gear was subsequently amended to the loose or slip-eccentric system, thus giving automatic reversal.[1]

Decline

When George Whale become chief mechanical engineer of the LNWR in 1903, he started a programme of eliminating Webb's over-complicated duplex compound locomotives. Consequently, the class was scrapped between December 1903, and July 1905, having been replaced by Whale's Experiment class.

References

  1. Baxter 1979, pp. 194–195.
  2. Baxter 1979, p. 195.
  • Baxter, Bertram (1979). Baxter, David, ed. British Locomotive Catalogue 1825–1923, Volume 2B: London and North Western Railway and its constituent companies. Ashbourne, Derbyshire: Moorland Publishing Company. ISBN 0-903485-84-2. 
This article is issued from Wikipedia - version of the 11/20/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.