LNWR Class C

LNWR Class C
Type and origin
Power type Steam
Designer George Whale
Rebuilder Crewe Works
Rebuild date 1904–06
Number rebuilt 15 from Class A
Specifications
Configuration 0-8-0
Gauge 4 ft 8 12 in (1,435 mm)
Driver dia. 4 ft 5.5 in (1.359 m)
Fuel type Coal
Boiler pressure 175 psi (1.21 MPa)
Heating surface 1,489 sq ft (138.3 m2)
Cylinders 2 inside
Cylinder size 19.5 by 24 inches (500 mm × 610 mm)
Career
Operators London and North Western Railway
Disposition 5 rebuilt to Class G1 1925–27;
10 scrapped 1927–32

The London and North Western Railway (LNWR) Class C was a class of 0-8-0 steam locomotives. They were two cylinder simple expansion rebuilds of the three-cylinder Class A designed by F.W. Webb. Fifteen Class As (16 according to the LNWR Society) were converted to Class C between 1904 and 1906 by George Whale.

LNWR goods train leaving Crewe

Class C1

Main article: LNWR Class C1

The Class A boilers proved inadequate for the 19½ inch bore cylinders of the Class C so the next 34 Class A conversions were to Class C1 with 18½ inch bore cylinders.[1]

Numbering

All passed into LMS ownership in 1923, and the LMS allocated them the numbers 8953-67, though not all were applied before withdrawal.

Rebuilding

The LMS rebuilt five of the Class Cs (LMS Nos 8953/4/62/4/6) to Class G1 between 1925-1927.

Withdrawal

The remaining 10 engines were withdrawn between 1927 and 1932. None was preserved.

References

  1. LNWR Society. "Goods Engines of LNWR - 'C' and 'C1' class". Lnwrs.org.uk. Retrieved 2012-04-09.

Further reading

Wikimedia Commons has media related to LNWR C Class.
This article is issued from Wikipedia - version of the 10/3/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.