Key stretching

In cryptography, key stretching techniques are used to make a possibly weak key, typically a password or passphrase, more secure against a brute force attack by increasing the time it takes to test each possible key. Passwords or passphrases created by humans are often short or predictable enough to allow password cracking. Key stretching makes such attacks more difficult.

Key stretching techniques generally work as follows. The initial key is fed into an algorithm that outputs an enhanced key. The enhanced key should be of sufficient size to make it infeasible to break by brute force (e.g. at least 128 bits). The overall algorithm used should be secure in the sense that there should be no known way of taking a shortcut that would make it possible to calculate the enhanced key with less processor work than by using the key stretching algorithm itself.

The key stretching process leaves the attacker with two options: either try every possible combination of the enhanced key (infeasible if the enhanced key is long enough), or else try likely combinations of the initial key. In the latter approach, if the initial key is a password or a passphrase, then the attacker would first try every word in a dictionary or common password list and then try all character combinations for longer passwords. Key stretching does not prevent this approach, but the attacker has to spend much more time on each attempt.

If the attacker uses the same class of hardware as the user, each guess will take the same amount of time to process as it took the user (for example, one second). Even if the attacker has much greater computing resources than the user, the key stretching will still slow the attacker down, since the user's computer only has to compute the stretching function once upon the user entering their password, whereas the attacker must compute it for every guess in the attack.

There are several ways to perform key stretching. A cryptographic hash function or a block cipher may be repeatedly applied in a loop. In applications where the key is used for a cipher, the key schedule in the cipher may be modified so that it takes a specific length of time to perform.

A related technique, salting, protects against time-memory tradeoff attacks and is often used in conjunction with key stretching.

Hash-based

Many libraries provide functions which perform key stretching as part of their function; see crypt(3) for an example. PBKDF2 is for generating an encryption key from a password, and not necessarily for password authentication. PBKDF2 can be used for both if the number of output bits is less than or equal to the internal hashing algorithm used in PBKDF2 which is usually SHA-1 (160 bits) or used as an encryption key to encrypt static data.

Strength and time

These examples assume that a personal computer can do about 65000 SHA-1 hashes in one second using compiled code. Thus a program that uses key stretching can use 65000 rounds of hashes and delay the user for at most one second.

Testing a trial password or passphrase typically requires one hash operation. But if key stretching was used, the attacker must compute a strengthened key for each key they test, meaning there are 65000 hashes to compute per test. This increases the attacker's workload by a factor of 65000, approximately 216, which means the enhanced key is worth about 16 additional bits in key strength.

Moore's law implies that computer speed doubles roughly every 1.5 years. Under this assumption, every 1.5 years one more bit of key strength is plausibly brute-forcible. This implies that 16 extra bits of strength is worth about 16×1.5 = 24 years later cracking, but it also means that the number of key stretching rounds a system uses should be doubled about every 1.5 years to maintain the same level of security. (Since most keys are more secure than necessary, systems that require consistent deterministic key generation will likely not update the number of iterations used in key stretching. In such a case, the designer should take into consideration how long they wish for the key derivation system to go unaltered and should choose an appropriate number of hashes for the lifespan of the system.)

CPU-bound hash functions are still vulnerable to hardware implementations. Such implementations of SHA-1 exist using as few as 5000 gates, and 400 clock cycles.[1] With multi-million gate FPGAs costing less than $100,[2] an attacker can build a fully unrolled hardware cracker for about $5000. Such a design, clocked at 100 MHz can test about 300,000 keys/second. The attacker is free to choose a good price/speed compromise, for example a 150,000 keys/second design for $2500. The key stretching still slows down the attacker in such a situation; a $5000 design attacking a straight SHA-1 hash at a rate of 300,000 keys/second would only be producing enhanced keys at a rate of 300,000 / 216 = 4.6 keys/second.

To defend against the hardware approach, memory bound cryptographic functions have been proposed. These access large amounts of memory in an unpredictable fashion such that caches are ineffective. Since large amounts of low latency memory are expensive, a would-be attacker is significantly deterred.

A weakness exists in the hash-based key stretching algorithms that use an iterative hash function. This attack is known as a transferable state attack. The attack entails transferring the state from the previous hash in the iterated hashes directly into the transform method of the next iteration. This method can decrease the time it takes to stretch the key to 80%-90% of the original stretching time.[3] This attack has been implemented for SHA256.[4]

History

The first deliberately slow password-based key derivation function "CRYPT" was described in 1978 by Robert Morris for encrypting Unix passwords.[5] It used an iteration count of 25, a 12-bit salt and a variant of DES as the sub-function. (DES proper was avoided in an attempt to frustrate attacks using standard DES hardware.) Passwords were limited to a maximum of eight ASCII characters. While it was a great advancement for its time, CRYPT(3) is now considered inadequate. The iteration count, designed for the PDP-11 era, is too low, 12 bits of salt is an inconvenience but does not stop precomputed dictionary attacks, and the 8 character limit prevents the use of stronger passphrases.

Modern password-based key derivation functions, such as PBKDF2, use a cryptographic hash, such as MD5 or SHA1, a longer salt (e.g. 64 bits) and a high iteration count (tens or hundreds of thousands).

In 2009, a memory-intensive key strengthening algorithm, scrypt, was introduced with the intention of limiting the use of custom, highly parallel hardware to speed up key testing.[6][7]

In 2013, a Password Hashing Competition was held to select an improved key stretching standard that would resist attacks from graphics processors and special purpose hardware. The winner, Argon2, was selected on July 1, 2015.[8]

Some systems that use key stretching

See also

References

This article is issued from Wikipedia - version of the 9/27/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.