DR Class 25.10

DR Class 25.10
Number(s) DR 25 1001–1002
Quantity 2
Manufacturer Lokomotivbau "Karl Marx" Babelsberg
Year(s) of manufacture 1954- 1955
Retired 1967
Wheel arrangement 2-8-0
Axle arrangement 1'D
Axle arrangement 1'D h2
Type 25 1001: S 45.18
25 1002: S 45.17
Gauge 1,435 mm (4 ft 8 12 in)
Length over buffers 23,300 mm
Service weight 89.0 t
Adhesive weight 72.0 t
Axle load 18.0 t
Top speed 100 km/h
Indicated Power 1,750 kW
Driving wheel diameter 1,600 mm
Leading wheel diameter 1,000 mm
No. of cylinders 2
Cylinder bore 600 mm
Piston stroke 660 mm
Boiler Overpressure 16 bar
Grate area 3.76 m²
Radiative heating area 25 001: 17.5 m²
25 1001: 20 m²
Superheater area 25 001: 61 m²
25 1001: 65.00 m²
Evaporative heating area 25 001: 171.8 m²
25 1001: 158.60 m²
Tender 25 001: 2'2' T 30
(as 25 1002: 2`2 T28Kst)
25 1001: 2'2' T 27.5
Water capacity 27.5/30.0 m³ (28 m³)
Fuel 12 t coal / 18.5 t brown coal dust (10 t coal dust with 2`2 T30)

The steam locomotives of DR Class 25.10 were passenger train locomotives built for the Deutsche Reichsbahn (DR) in East Germany after the Second World War.

History

The Class 25.10 was developed by the DR in 1954. It was built primarily with heavy passenger trains in mind, but was also intended to handle goods traffic. The first of the two trials locomotives to be manufactured was equipped with a mechanical stoker for lump coal. It was given the operating number 25 001. The second example had coal dust firing and was allocated number 25 1001. Only the coal dust fired vehicle was convincing enough, which resulted in the conversion of the first engine to coal dust firing as well in 1958 and its renumbering to 25 1002. The engines did not go into full production however, because the DR Class 23.10 had been designed and built. The makers were the VEB Lokomotivbau "Karl Marx" in Potsdam-Babelsberg.

The two engines were mainly stationed at Arnstadt, where they hauled passenger trains to Weimar, Saalfeld, Erfurt and Meiningen. For a short time, from 1960 to 1962, the engines were homed at Senftenberg depot. However the numerous cracks in the plate frame often required repair and the locomotives were frequently out of service. The 25.10s were retired as early as 1964 and scrapped at Nordhausen in 1968.

Number 25 1001 was equipped with a coal dust tender of Class 2'2' T 27.5. Number 25 001 had a 2'2' 30 tender, which was replaced in 1958 by the coal dust tender of 44 054, when it was converted to coal dust firing. The locomotive was renumbered to 25 1002.

See also

This article is issued from Wikipedia - version of the 7/18/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.