SOR BN 10,5

SOR BN 10,5

SOR BN 10,5
Overview
Manufacturer SOR
Assembly Czech Republic
Body and chassis
Doors 2 or 3
Floor type Low-entry
Powertrain
Engine IVECO Tector NEF V6 Diesel engine
Capacity

29 seated

57 standing
Power output 185 kW (248 hp)
Transmission ZF 6-speed manual
Dimensions
Length 10,750 mm (423.2 in)
Width 2,525 mm (99.4 in)
Height 3,000 mm (118.1 in)
Curb weight 8,100 kg (17,900 lb)

SOR BN 10,5 is an low-entry midibus produced by bus manufacturer SOR from the Czech Republic since 2005.

Construction features

Bus BN 10.5 is a two-axle low-entry midibus, which is designed primarily for urban and suburban traffic. On the right side plate of the bus are three sets of hinged doors. The space between the front and middle door is a low-floor (at a height of 360 mm above the ground). The rear part of the vehicle is located at a height of 800 mm above the ground. The drive axle is back (Spanish brand DANA) front axle wishbone design with independent wheel suspension and its own production. The engine and manual transmission is located in the rear of the bus. Semi-self-body, which is made of welded steel sections, is outside plating, interior is lined with plastic sheeting.

Production and operation

SOR BN 10.5 replaced in the production its predecessor, step-entrance midibus SOR B 10,5. Buses BN 10.5, are used for less congested urban lines or commuter lines. One of the operators of these buses as the company ČSAD buses Plzeň . In the summer, 2008 SOR won a public tender The transport undertakings in Bratislava. Total to be delivered 60 buses type BN 10.5 with a total value of 270 million Slovak crowns by 2011.

See also

Wikimedia Commons has media related to SOR BN 10,5.
This article is issued from Wikipedia - version of the 11/17/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.