Zinc bromide

Zinc bromide
Names
IUPAC name
Zinc bromide
Other names
Zinc(II) bromide,
Zinc dibromide
Identifiers
7699-45-8 YesY
3D model (Jmol) Interactive image
ChemSpider 22790 YesY
ECHA InfoCard 100.028.836
PubChem 24375
RTECS number ZH1150000
UNII OO7ZBU9703 YesY
Properties
ZnBr2
Molar mass 225.198 g/mol
Appearance white crystalline powder
hygroscopic
Density 4.20 g/cm3 (20 °C)
4.22 g/cm3 (25 °C)
Melting point 394 °C (741 °F; 667 K)
Boiling point 697 °C (1,287 °F; 970 K)
311 g/100 mL (0 °C)
447 g/100 mL (20 °C)[1]
538 g/100 mL (100 °C)[2]
Solubility very soluble in alcohol, ether, acetone, tetrahydrofuran
1.5452
Hazards
Safety data sheet External MSDS
NFPA 704
Flammability code 0: Will not burn. E.g., water Health code 3: Short exposure could cause serious temporary or residual injury. E.g., chlorine gas Reactivity code 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g., liquid nitrogen Special hazards (white): no codeNFPA 704 four-colored diamond
0
3
0
Flash point Non-flammable
Related compounds
Other anions
Zinc fluoride,
Zinc chloride,
Zinc iodide
Other cations
Cadmium bromide,
Mercury(II) bromide,
Calcium bromide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY verify (what is YesYN ?)
Infobox references

Zinc bromide (ZnBr2) is an inorganic compound with the chemical formula ZnBr2. It is a colourless salt that shares many properties with zinc chloride (ZnCl2), namely a high solubility in water forming acidic solutions, and solubility in organic solvents. It is hygroscopic and forms a dihydrate ZnBr2 · 2H2O.

Production

ZnBr2 · 2H2O is prepared by treating zinc oxide or zinc metal with hydrobromic acid.

ZnO + 2 HBr + H2O → ZnBr2 · 2H2O

The anhydrous material can be produced by dehydration of the dihydrate with hot CO2 or by reaction of zinc metal and bromine.[3]

Structure

Crystalline ZnBr2 adopts the same structure as ZnI2: four tetrahedral Zn centers share three vertices to form “super-tetrahedra” of nominal composition {Zn4Br10}2−, which are linked by their vertices to form a three-dimensional structure.[4] The dihydrate ZnBr2 · 2H2O also has a usual structure and should be described as Zn(H2O)6 Zn2Br6, where the Zn2Br62− ion has bromine bridges linking the two zinc atoms. A similar structure is found in the dimeric form of aluminium bromide (Al2Br6).[5]

Gaseous ZnBr2 is linear in accordance with VSEPR theory with a Zn-Br bond length of 221 pm.[6]

Uses

Zinc bromide is used in the following applications:[3]

Safety

Safety considerations are similar to those for zinc chloride, for which the toxic dose for humans is 3–5 g.[3]

See also

References

  1. Patnaik, P. (2003). Handbook of Inorganic Chemicals. McGraw-Hill Professional. ISBN 0-07-049439-8.
  2. "Zinc Bromide". Chemicalland21.
  3. 1 2 3 Rohe, D. M.; Wolf, H. U. (2005). "Zinc Compounds". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a28_537.
  4. Chieh, C.; White, M. A. (1984). "Crystal structure of anhydrous zinc bromide". Zeitschrift für Kristallographie. 166 (3-4): 189–197. doi:10.1524/zkri.1984.166.3-4.189.
  5. Duhlev, R.; Brown, I. D.; Faggiani, R. (1988). "Zinc bromide dihydrate ZnBr2 · 2H2O: a double-salt structure". Acta Crystallographica C. 44 (10): 1696–1698. doi:10.1107/S0108270188006584.
  6. Wells A. F. (1984). Structural Inorganic Chemistry (5th ed.). Oxford Science Publications. ISBN 0-19-855370-6.
  7. "Zinc Bromide - drilling fluids". Oilfield Glossary. Schlumberger.
  8. Blaylock, D. P.; Abu-Jawdeh, E. (January 1999). "The Georgia Institute of Technology High-Dose Gamma Irradiation Facility". 32nd Annual Midyear Meeting - Creation and Future Legacy of Stockpile Stewardship Isotope Production, Applications, and Consumption. Poster Session. Albuquerque, NM: Health Physics Society.
This article is issued from Wikipedia - version of the 6/21/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.