Widnes-Runcorn Transporter Bridge

Widnes-Runcorn Transporter Bridge
Coordinates 53°20′48″N 2°44′11″W / 53.3466°N 2.7363°W / 53.3466; -2.7363Coordinates: 53°20′48″N 2°44′11″W / 53.3466°N 2.7363°W / 53.3466; -2.7363
Carries Vehicles
Pedestrians
Crosses River Mersey
Locale Widnes / Runcorn
Characteristics
Design Transporter Bridge
Longest span 300m (1,000 ft)
Clearance below 25m (82 ft)
History
Designer John Webster
Construction begin 1901
Opened 1905
Closed 1961

The Runcorn-Widnes Transporter Bridge crossed the river Mersey and Manchester Ship Canal linking the towns of Runcorn and Widnes. It was completed in 1905, it was Britain's first transporter bridge and the largest of its type ever built in the world.[1] It continued in use until 1961 when it was replaced by a through arch bridge, which is now known as the Silver Jubilee Bridge. The transporter bridge was then demolished.

History

At the beginning of the 20th century the only means of crossing the river Mersey at Runcorn Gap were by rail on the Runcorn Railway Bridge (which also had a footpath) or by using the ancient ferry (which was a rowing boat). In the 1890s the Manchester Ship Canal had been constructed and this meant that the journey by ferry had to be made in two stages, with a climb over the wall of the canal between the stages. A road bridge was clearly needed but it would have to pass high enough over the canal to allow the passage of ocean-going ships. The cost of doing this was felt to be prohibitive.[2]

In 1899 the Widnes & Runcorn Bridge Company was established under the chairmanship of Sir John Brunner to investigate the options. Their decision was to build a transporter bridge. This would be cheaper than an orthodox type of bridge and the passage of the transporter car could be timed to allow the passage of the ships. The first transporter bridge in the world had been opened in 1893 in Bilbao, Spain.[3] This had been followed in 1898 by transporter bridges in Rouen, France and in Bizerta, which is now in Tunisia.[4] Parliamentary approval had already been obtained for a transporter bridge over the River Usk at Newport, Monmouthshire.[5] This was then followed by the construction of a transporter bridge in Middlesbrough over the River Tees in 1911.

An Act of Parliament was obtained in 1900 giving approval for the bridge, and the Act also allowed for the formal ending of the ferry.[6] It was designed by John Webster and John Wood.[7] Construction began in December 1901 and was completed in 1905. The cost was £130,000 (£NaN in 2016).[8] The transporter bridge was opened (in the absence of King Edward VII who was indisposed) by Sir John Brunner on 29 May 1905.[9]

During the following years there were problems both with the functioning of the bridge and with its financing. The Company could not make it pay and in 1911 it was sold to Widnes Corporation.[10] A number of improvements were made to the bridge over the years.[11] In its later years it made 49,000 journeys annually, carrying 280,000 cars, 145,000 commercial vehicles and over 2 million passengers.[12] However it was inadequate for the growing needs of the region and its physical condition was deteriorating. A fixed high-level bridge was needed and this was eventually opened in 1961 after which the transporter bridge was demolished.[13]

Structure

Drawing of the bridge showing span and transporter car

The two towers were 180 feet (55 m) high and the distance between them spanned by a truss was 1,000 feet (300 m). The weight of the cables suspending the girder was 250 tons. The underside of the girder was 82 feet (25 m) above the high water level. The transporter car was 55 feet (17 m) in length and 24 feet 6 inches (7.5 m) in width and was designed to carry 4 two-horse farm waggons and 300 passengers. A shelter was provided for the passengers. The bottom of the car was 12 feet (3.7 m) above high water level and it cleared the ship canal wall by 4.5 feet (1.4 m). It was suspended from a moving trolley 77 feet (23 m) in length. In conditions of reasonable weather and load the journey took 2.5 minutes. The driver was sited in a cabin on top of the car from which he had an uninterrupted view in all directions. In order to provide power for motors on the trolley a power house was built within the tower on the Widnes side. Approach roads of 320 feet (98 m) on the Widnes side and 470 feet (140 m) on the Runcorn side were built.[9][14]

Former power house with the road and rail bridges visible beyond

Present day

The former approaches to the transporter bridge at the bottom of Waterloo Road, Runcorn and Mersey Road, Widnes can still be seen. On the Widnes side the power house remains and it has been designated by English Heritage as a Grade II* listed building.[15] Transporter Building, the former office building also remains nearby in Mersey Road.[16]

See also

References

  1. Thompson 2000, p. 27.
  2. Thompson 2000, p. 3.
  3. Thompson 2000, p. 6.
  4. Thompson 2000, pp. 25–27.
  5. Starkey 1990, p. 213.
  6. Thompson 2000, p. 5.
  7. Thompson 2000, pp. 4, 16.
  8. UK CPI inflation numbers based on data available from Gregory Clark (2016), "The Annual RPI and Average Earnings for Britain, 1209 to Present (New Series)" MeasuringWorth.
  9. 1 2 Starkey 1990, pp. 213–214.
  10. Thompson 2000, p. 22.
  11. Thompson 2000, pp. 23–24.
  12. Thompson 2000, p. 36.
  13. Starkey 1990, pp. 221–222.
  14. Thompson 2000, pp. 12–15.
  15. "Former transporter bridge power house", The National Heritage List for England, English Heritage, 2011, retrieved 10 May 2011
  16. "Halton YMCA join West Bank community", Runcorn and Widnes World, Newsquest (North Wales), 9 July 2008, retrieved 2 July 2014

Bibliography

  • Starkey, H. F. (1990), Old Runcorn, Halton Borough Council 
  • Thompson, Dave (2000), Bridging the Years: The Story of Runcorn-Widnes Transporter Bridge, Widnes: Dave Thompson 

Further reading

  • The Bridging of Runcorn Gap, Halton Borough Council, 1978 
  • Thompson, Dave (2000), Bridging the Mersey: A Pictorial History, Zaltbommel: European Library 
This article is issued from Wikipedia - version of the 8/21/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.