This article is about the paint. For other uses, see Whitewash (disambiguation).
"Lime wash" redirects here. For Ca(OH)2, see Calcium hydroxide.
Three different brands of Kalsomine; the directions for use are visible when viewing image at full size

Whitewash, or calcimine, kalsomine, calsomine, or lime paint is a low-cost type of paint made from slaked lime (calcium hydroxide, Ca(OH)2) and chalk (calcium carbonate, (CaCO3), sometimes known as "whiting". Various other additives are also used.

Usage as paint

Whitewashers, photographed by Nicolae Ionescu (photographer), 1928

Whitewash cures through a reaction with carbon dioxide in the atmosphere to form calcium carbonate in the form of calcite, a reaction known as carbonation.

It is usually applied to exteriors; however, it is traditionally used for interiors in food preparation areas, particularly rural dairies, for its mildly antibacterial properties. Occasionally, it is coloured and used on structures such as the hallways of apartment buildings, but it is not popular for this as it can rub off onto clothing to a small degree. In Britain and Ireland, whitewash was used historically, for both interiors and exteriors, in workers' cottages, and still retains something of this association with rural poverty. In the United States, a similar attitude is expressed in the old saying: "Too proud to whitewash and too poor to paint".

Whitewash is especially compatible with masonry because it is absorbed easily and the resultant chemical reaction hardens the medium.

Lime wash is pure slaked lime in water. It produces a unique surface glow due to the double refraction of calcite crystals. Limewash and whitewash both cure to become the same material.

When whitewash or limewash is initially applied, it has very low opacity, which can lead novices to overthicken the paint. Drying increases opacity, and subsequent curing increases opacity even further.

Limewash relies on being drawn in to a substrate unlike a modern paint that adheres to the surface. The process of being drawn in needs to be controlled by damping down. If a wall is not damped, it can leave the lime and pigments on the surface powdery; if the wall is saturated, then there is no surface tension and this can result in failure of the limewash. Damping down is not difficult but it does need to be considered before application of the limewash.[1]


Additives that have been used include water glass, glue, egg white, Portland cement, salt, soap, milk, flour, soil.

Whitewash is sometimes coloured with earths to achieve colours spanning the range of broken white, cream, yellow and a range of browns.

The blue laundry dye (such as Reckett's 'Dolly Blue' in the UK, Ireland and Australia, Loulaki in Greece, or Mrs. Stewart's Bluing in North America) formerly widely used to give a bright tinge to boiled white textiles was a common 19th century addition and gives a pale blue paint.

Historically, pig's blood was added to give the colour Suffolk pink, a colour still widely used on house exteriors in some areas of the UK. If animal blood is applied excessively, however, its iron oxide can compromise the lime binder's strength.

Pozzolanic materials are occasionally added to give a much harder wearing paint finish. This addition, however, creates a short open time, and therefore requires timely application of the altered paint.

Linseed oil is sometimes added (typically 0.5-2%) to improve adhesion on difficult surfaces.

Cement addition makes a harder wearing paint in white or grey. Open time is short, so this is added at point of use. However, the use of cement restricts the breathable aspects of the limewash; Cement should not be applied to historic buildings in general.

Dilute glues improve paint toughness.

Wheat flour has been used as a strength enhancing binder. Salt is usually added to prevent the flour going mouldy later in damp conditions. The use of salt brings its own issues, such as deterioration of brick and stone.


Basic limewash can be inadequate in its ability to prevent rain driven water ingress. Additives are being developed but these have the potential for affecting free vapour permeability; for this reason silicate paints, more common in Germany, are gaining popularity in the UK over limewash.


Simple lime paints are very low cost. A 25 kg bag of lime makes around 100 kg of paint, and costs around £6 in the UK (2008).


White-painted trees in Turkey
A whitewashed 'langhuis' (long cottage) in rural Verloren Vlei, Western Cape region of South Africa.


Whitewash is applied to trees, especially fruit trees, to prevent sun scald.[2] Most often only the lower trunk is painted. In Poland painting the whole trunk is also said to help keep the body of the tree cool in late winter/ early spring months and hence help prevent fruit trees from blooming too soon i.e. when warm sunny days could promote rapid tree warming, rising sap and bloom and intermittent frosty nights could damage outer tree rings and destroy the young buds and blossoms.

Dairy barns

In the middle of the 20th century, when family farms with dairy barns were common in the Upper Midwest of the USA, whitewash was a necessary part of routine barn maintenance.

A traditional animal barn contains a variety of extremely rough surfaces that are difficult to wash and keep clean, such as stone and brick masonry, and also rough-cut lumber for the ceiling. Left alone these surfaces collect dust, dirt, insect debris and wastes, and can become very dirty.

Whitewash aids in sanitation by coating and smoothing over the rough surfaces. Successive applications of whitewash build up layers of scale which flakes off and in the process removes surface debris with it. The coating also has antimicrobial properties that provide hygienic and sanitary benefits for animal barns.[3]

Typically the farm whitewash application is an annual process and has the following steps:

Nonremovable electric equipment is often enclosed in protective outer shells that prevent whitewash intrusion. For example, circuit breaker panels may be enclosed within wooden cabinetry which keeps the whitewash spray coating from entering the panel.

Other uses

Whitewash was used during the Second World War by the German Armed Forces as an easy-to-apply winter camouflage for soft- and hard-skinned vehicles, aircraft and helmets.[4]

Whitewashing the Old House, painting by L.A. Ring. From Statens Museum for Kunst.

The incident of Tom Sawyer whitewashing a fence as punishment is a famous image in American literature. It appears in The Adventures of Tom Sawyer, written in 1876 by Mark Twain.

Metaphorically, whitewashing refers to suppression or "glossing over" (possibly a close parallel construction) of potentially damaging or unwelcome information. In many British Commonwealth areas, a whitewash refers to a game in which one side fails to score at all; the usage is especially found in cricket.

See also


  1. https://www.mikewye.co.uk/guidesheets/limewashing/
  2. "California Agriculture PDF" (PDF). ucce.ucdavis.edu. June 1970. Retrieved February 12, 2014.
  3. "Fias Co Farm/Recipes- whitewash". Fiascofarm.com. Retrieved 2014-02-03.
  4. Rothman, Gordon L.; Dennis, Peter (2013). World War II Tactical Camouflage Techniques. p. 52.
This article is issued from Wikipedia - version of the 11/13/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.