Vertical exaggeration

A vertically exaggerated mountain. In reality, the terrain would appear much flatter.

Vertical exaggeration (VE) is a scale that is used in raised-relief maps, plans and technical drawings (cross section perspectives), in order to emphasize vertical features, which might be too small to identify relative to the horizontal scale.

The vertical exaggeration is given by:

{\mathit {VE}}={\mathit {\frac {HS}{VS}}}

where VS is the vertical scale and HS is the horizontal scale, both given as representative fractions.

For example, if 1 centimetre (0.39 in) vertically represents 200 metres (660 ft) and 1 centimetre (0.39 in) horizontally represents 4,000 metres (13,000 ft), the vertical exaggeration is given by 4000 / 200, which is 20.

Vertical exaggeration is given as a number; for example 5× means that vertical measurements are 5 times greater than horizontal measurements. The above example would be given as 20x. A value of 1× indicates that horizontal and vertical scales are identical, and is regarded as having "no vertical exaggeration." Vertical exaggerations less than 1 are not common, but indicate a reduction in vertical scale (or, equivalently, a horizontal exaggeration). In some cases, if the vertical exaggeration is too high, the map reader may get confused.

External links

Introduction to Topographic Maps – Vertical Exaggeration

This article is issued from Wikipedia - version of the 9/15/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.