United States B-class submarine

For ships with a similar name, see B-class submarine.
USS B-3, underway near the New York Navy Yard, 1909.
Class overview
Builders:
Operators:  United States Navy
Preceded by: Plunger class
Succeeded by: C class
Built: 1906-1907
In commission: 19071921
Completed: 3
Retired: 3
General characteristics
Type: Submarine
Displacement:
  • 145 long tons (147 t) surfaced
  • 173 long tons (176 t) submerged
Length: 82 ft 6 in (25.15 m)
Beam: 12 ft 6 in (3.81 m)
Draft: 10 ft 6 in (3.20 m)
Propulsion:
Speed:
  • 9 knots (17 km/h; 10 mph) surfaced
  • 4 knots (7.4 km/h; 4.6 mph) submerged
Range: 540 nautical miles (1,000 km; 620 mi) (surfaced), 12 nautical miles (22 km; 14 mi) (submerged)
Test depth: 150 ft (46 m)
Complement: 10 officers and enlisted
Armament: 2 × 18 inch (457 mm) bow torpedo tubes (4 torpedoes)

The B-class submarines were three United States Navy submarines built by the Fore River Shipbuilding Company in Quincy, Massachusetts, under a subcontract from the Electric Boat Company.[1] They were eventually stationed in the Philippines, an American possession, beginning in 1912-15. They were shipped there on colliers (coal-carrying ships). All three were stricken and expended as targets 1919-22.[2]

Design

These vessels introduced some features intended to increase underwater speed, including a small sail and a rotating cap over the torpedo tube muzzles. For extended surface runs, the small sail was augmented with a temporary piping-and-canvas structure (see photo). Apparently the "crash dive" concept had not yet been thought of, as this would take considerable time to deploy and dismantle. This remained standard through the N class, commissioned 1917-1918. Experience in World War I showed that this was inadequate in the North Atlantic weather, and earlier submarines serving overseas in that war (E class through L class) had their bridge structures augmented with a "chariot" shield on the front of the bridge. Starting with the N class, built with lessons learned from overseas experience, US submarines had bridges more suited to surfaced operations in rough weather. The streamlined, rotating torpedo tube muzzle cap eliminated the drag that muzzle holes would otherwise cause. In the stowed position, the submarine appears to have no torpedo tubes, as the holes in the cap are covered by the bow stem. This feature remained standard through the K class, after which it was replaced with shutters that were standard through the 1950s.

Ships

See also

Media related to B class submarines of the United States at Wikimedia Commons

Citations

  1. "Quincy's Shipbuilding Heritage". thomascranelibrary.org. Retrieved 16 July 2010.
  2. Gardiner, p. 127
  3. "Viper / B-1 (SS-10)". navsource.org. Retrieved 16 July 2010.
  4. "Cuttlefish / B-2 (SS-11)". navsource.org. Retrieved 16 July 2010.
  5. "Tarantula / B-3 (SS-12)". navsource.org. Retrieved 16 July 2010.

Sources

This article is issued from Wikipedia - version of the 9/23/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.