Polyetherimide

Polyetherimide
Names
Other names
PEI
Identifiers
61128-46-9 YesY
ECHA InfoCard 100.126.800
Properties
(C37H24O6N2)n
Molar mass Variable
Appearance Amber-to-transparent solid
Density 1.27 g/cm3
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Polyetherimide (PEI) is an amorphous, amber-to-transparent thermoplastic with characteristics similar to the related plastic PEEK. Relative to PEEK, PEI is cheaper, but is lower in impact strength and usable temperature.[1]

Structure

The molecular formula of the repeating unit of PEI is C37H24O6N2 and the molecular weight is 592 g/mol.

Properties

The glass transition temperature of PEI is 217 °C. Its amorphous density at 25 °C is 1.27 g/cm3. It is prone to stress cracking in chlorinated solvents.

Ultem

Ultem is a family of PEI products manufactured by SABIC as a result of acquiring the General Electric Plastics Division in 2007, developed by Joseph G. Wirth in the early 1980s. Ultem resins are used in medical and chemical instrumentation due to their heat resistance, solvent resistance and flame resistance. Ultem 1000 (standard, unfilled polyetherimide) has a high dielectric strength, inherent flame resistance, and extremely low smoke generation. Ultem has high mechanical properties and performs in continuous use to 340 °F (170 °C). Ultem 1000 has typical thermal conductivity of 0.22 W/(m·K) (but some sources give 0.122 W/(m.K)). It has "Questionable usage on alkaline solutions."[2]

References

This article is issued from Wikipedia - version of the 9/13/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.