Radio clock

Not to be confused with Clock radio.
A modern LF radio-controlled clock

A radio clock or radio-controlled clock (RCC) is a clock that is automatically synchronized by a time code transmitted by a radio transmitter connected to a time standard such as an atomic clock. Such a clock may be synchronized to the time sent by a single transmitter, such as many national or regional time transmitters, or may use multiple transmitters, like the Global Positioning System. Such systems may be used to automatically set clocks or for any purpose where accurate time is needed.

One common style of radio-controlled clock uses time signals transmitted by dedicated terrestrial longwave radio transmitters, which emit a time code that can be demodulated and displayed by the radio controlled clock. The radio controlled clock will contain an accurate time base oscillator to maintain timekeeping if the radio signal is momentarily unavailable. Other radio controlled clocks use the time signals transmitted by dedicated transmitters in the shortwave bands. Systems using dedicated time signal stations can achieve accuracy of a few tens of milliseconds.

GPS satellite navigation receivers also internally generate accurate time information from the satellite signals. General purpose or consumer grade GPS may have an offset of up to one second between the internally calculated time, which is much more accurate than 1 second, and the time displayed on the screen.

Other broadcast services may include timekeeping information of varying accuracy within their signals.

Single transmitter

Radio clocks synchronized to terrestrial time signals can usually achieve an accuracy within a hundredth of a second relative to the time standard,[1] generally limited by uncertainties and variability in radio propagation.

Longwave and shortwave transmissions

Radio clocks depend on coded time signals from radio stations. The stations vary in broadcast frequency, in geographic location, and in how the signal is modulated to identify the current time. In general, each station has its own format for the time code.

List of radio time signal stations

List of radio time signal stations
Frequency Callsign Country Location Aerial type Power Remarks
25 kHz RJH69 BelarusBelarus Vileyka ( 54° 28' 8 N 26° 46' 23 E) 3 umbrella antennas, fixed on 3 guyed tubular masts, insulated against ground with a height of 305 metres and 15 guyed lattice masts with a height of 270 metres
25 kHz RJH77 Russia Russia Arkhangelsk ( 64° 21' 51 N 41° 33' 52 E) 3 umbrella antennas, fixed on 18 guyed lattice masts, height of central masts: 305 metres
25 kHz RJH63 Russia Russia Imeretinskaya ( 44° 46' 25 N 39° 32' 50 E) umbrella antenna, fixed on 13 guyed lattice masts, height of central mast: 425 metres
25 kHz RJH99 Russia Russia Nizhny Novgorod ( 56° 10' 20 N 43° 55' 38 E) 3 umbrella antennas, fixed on 3 guyed tubular masts, insulated against ground with a height of 205 metres and 15 guyed lattice masts with a height of 170 metres
25 kHz RJH66 Kyrgyzstan Kyrgyzstan Bishkek ( 43° 2' 29 N 73° 37' 9 E) 3 umbrella antennas, fixed on 18 guyed lattice masts, height of central masts: 276 metres
25 kHz RAB99 Russia Russia Chabarowsk ( 48° 29' 29 N 134° 48' 59 E) umbrella antenna, fixed on 18 guyed lattice masts arranged in 3 rows, height of central masts: 238 metres
40 kHz JJY  Japan Mount Otakadoya, Fukushima ( 37° 22' 21 N 140° 50' 56 E) Capacitance hat, height 250 m 50 kW [2] Located near Fukushima and from Mount Hagane (located on Kyushu Island)
50 kHz RTZ Russia Russia Irkutsk ( 52° 25' 41 N 103° 41' 12 E) 10 kW [3] Inactive
60 kHz JJY  Japan Mount Hagane, Kyushu ( 33° 27' 54 N 130° 10' 32 E) Capacitance hat, height 200 m 50 kW [2] Located on Kyūshū Island
WWVB  United States Near Fort Collins, Colorado[4] ( 40° 40' 41 N 105° 2' 48 W) Two capacitance hats, height 122 m 70 kW [2] Received through most of mainland USA
MSF  United Kingdom Anthorn ( 54° 54' 27 N 3° 16' 24 W) Triple T-antenna, spun 150 metres above ground between two 227 metres high guyed grounded masts in a distance of 655 metres 17 kW Range up to 1500 km. Before 1 April 2007, the signal was transmitted from Rugby, Warwickshire ( 52° 21' 33 N 1° 11' 21 W)
66.66 kHz RBU  Russia Taldom, Moscow ( 56° 43' 59 N 37° 39' 47 E) umbrella antenna, fixed on a 275 metres high central tower insulated against ground and five 257 metres high lattice masts insulated against ground in a distance of 324 metres from the central tower 10 kW before 2008, transmitter located at 55° 44' 14 N 38° 9' 4 E
68.5 kHz BPC  China Shangqiu, Henan ( 34° 56' 54 N 109° 32' 34 E) 4 guyed masts, arranged in a square 90 kW 21 hours per day, with a 3-hour break from 05:00–08:00 (China Standard Time) daily (21:00–24:00 UTC)[5]
75 kHz HBG   Switzerland Prangins ( 46° 24' 24 N 6° 15' 4 E) T-antenna spun between two 125 metres tall, grounded free-standing lattice towers in a distance of 227 metres 20 kW Discontinued as of 1 January 2012
77.5 kHz DCF77  Germany Mainflingen, Hessen ( 50° 0' 58 N 9° 0' 29 E) Vertical omni-directional antennas with top-loading capacity, height 150 m [6] 50 kW [2] Located southeast of Frankfurt am Main with a range of up to 2000 km[7]
BSF  Taiwan Zhongli ( 25° 0' 19 N 121° 21' 55 E) T-antenna spun between two telecommunication towers in a distance of 33 metres [8]
100 kHz BPL  China Pucheng, Shaanxi ( 34° 27' 23 N 115° 50' 13 E) single guyed lattice steel mast 800 kW LORAN-C compatible format signal on air from 5:30 to 13:30 UTC,[9] with a reception radius up to 3000 km[10]
162 kHz TDF  France Allouis ( 47° 10' 10 N 2° 12' 16 E ) Two guyed steel lattice masts, height 350 m, fed on the top 2000 kW AM-broadcasting transmitter, located 150 km south of Paris with a range of up to 3500 km, using an encoding similar to that of DCF77, but requiring a more complex receiver as time signal is transmitted by phase modulation
198 kHz BBC Radio 4  United Kingdom London (51.518409°N 0.143691°W) Droitwich uses a T-aerial suspended between two 213 m guyed steel lattice radio masts, which stand 180 m apart from each other. 500 kW[11] Transmission towers at Droitwich (500 kW), Burghead (50 kW) and Westerglen (50 kW). The time signal is transmitted by 25 bit/s phase modulation.[12]
2.5 MHz BPM  China Pucheng, Shaanxi ( 34° 56' 54 N 109° 32' 34 E ) 7:30-1:00 UTC[13]
WWV  United States Near Fort Collins, Colorado ( 40° 40' 41 N 105° 2' 48 W ) 2.5 kW Binary-coded decimal (BCD) time code on 100 Hz sub-carrier
WWVH  United States Kekaha, Hawaii ( 21° 59' 16 N 159° 45' 46 W ) 5 kW
3.33 MHz CHU  Canada Ottawa, Ontario ( 45° 17' 40 N 75° 45' 27 W ) 3 kW 300 baud Bell 103 time code
4.996 MHz RWM Russia Russia Moscow ( 55° 44' 14 N 38° 9' 4 E ) 5 kW [3] SSB
5 MHz BPM  China Pucheng, Shaanxi ( 34° 56' 54 N 109° 32' 34 E ) 0:00-24:00 UTC[13]
BSF  Taiwan Zhongli [14]
WWV  United States Near Fort Collins, Colorado ( 40° 40' 41 N 105° 2' 48 W) 10 kW BCD time code on 100 Hz sub-carrier
WWVH  United States Kekaha, Hawaii ( 21° 59' 16 N 159° 45' 46 W ) 10 kW
HLA  South Korea Taejon ( 36° 23' 14 N 127° 21' 59 E ) 2 kW
LOL1  Argentina Buenos Aires 2 kW
YVTO  Venezuela Caracas 1 kW
7.85 MHz CHU  Canada Ottawa, Ontario ( 45° 17' 40 N 75° 45' 27 W ) 10 kW 300 baud Bell 103 time code
9.996 MHz RWM Russia Russia Moscow ( 55° 44' 14 N 38° 9' 4 E ) 5 kW [3] SSB
10 MHz BPM  China Pucheng, Shaanxi ( 34° 56' 54 N 109° 32' 34 E ) 0:00-24:00 UTC[13]
WWV  United States Near Fort Collins, Colorado ( 40° 40' 41 N 105° 2' 48 W) 10 kW BCD time code on 100 Hz sub-carrier
WWVH  United States Kekaha, Hawaii ( 21° 59' 16 N 159° 45' 46 W ) 10 kW
LOL1  Argentina Buenos Aires 2 kW Observatorio Naval
PPE[15]  Brazil Rio de Janeiro[15] Horizontal half-wavelength dipole[15] 1 kW[15]
11 MHz ATA  India New Delhi, National Physical Laboratory of India
14.67 MHz CHU  Canada Ottawa, Ontario ( 45° 17' 40 N 75° 45' 27 W ) 3 kW 300 baud Bell 103 time code
14.996 MHz RWM Russia Russia Moscow ( 55° 44' 14 N 38° 9' 4 E ) 8 kW [3] SSB
15 MHz BPM  China Pucheng, Shaanxi ( 34° 56' 54 N 109° 32' 34 E ) 1:00-9:00 UTC[13]
BSF  Taiwan Zhongli [14]
WWV  United States Near Fort Collins, Colorado ( 40° 40' 41 N 105° 2' 48 W) 10 kW BCD time code on 100 Hz sub-carrier
WWVH  United States Kekaha, Hawaii ( 21° 59' 16 N 159° 45' 46 W ) 10 kW
20 MHz WWV  United States Near Fort Collins, Colorado ( 40° 40' 41 N 105° 2' 48 W) 2.5 kW BCD time code on 100 Hz sub-carrier
25 MHz WWV  United States Near Fort Collins, Colorado ( 40° 40' 41 N 105° 2' 48 W) Broadband monopole 1.0 kW Schedule: variable (experimental broadcast)
MIKES  Finland Espoo, Finland (60°10′49″N 24°49′35″E / 60.18028°N 24.82639°E / 60.18028; 24.82639 (MIKES time signal transmitter)) λ/4 sloper antenna 200 W[16] Amplitude modulation similar to DCF77

A current list of times signal stations is published by the BIPM as an appendix to their annual report; the appendix includes coordinates of transmitter sites, operating schedules for stations, and the uncertainty of the carrier frequency of transmitters.[17][18] Many other countries can receive these signals (JJY can sometimes be received in New Zealand, Western Australia, Tasmania, and the Pacific Northwest of North America at night), but success depends on the time of day, atmospheric conditions, and interference from intervening buildings. Reception is generally better if the clock is placed near a window facing the transmitter. There is also a transit delay of approximately 1 ms for every 300 km the receiver is from the transmitter.

Clock receivers

A number of manufacturers and retailers sell radio clocks that receive coded time signals from a radio station, which, in turn, derives the time from a true atomic clock.

One of the first radio clocks was offered by Heathkit in late 1983. Their model GC-1000 "Most Accurate Clock" received shortwave time signals from radio station WWV in Colorado, USA whenever propagation conditions permitted, automatically switching between the 5, 10, and 15 MHz frequencies to find the strongest signal as conditions changed through the day and year. It kept time during periods of poor reception with a quartz-crystal oscillator. This oscillator was disciplined, meaning that the microprocessor-based clock used the highly accurate frequency standard signal received from WWV to trim the crystal oscillator. The timekeeping between updates was thus considerably more accurate than the crystal alone could have achieved. Time down to the tenth of a second was shown on an LED display. The GC-1000 originally sold for US$250 in kit form, US$400 preassembled, and was considered impressive at the time. Heath Company was granted a patent for its design.[19][20]

In the 2000s (decade) radio-based "atomic clocks" became common in retail stores; as of 2010 prices start at around US$15 in many countries.[21] Clocks may have other features such as indoor thermometers and weather station functionality. These use signals transmitted by the appropriate transmitter for the country in which they are to be used. Depending upon signal strength they may require placement in a location with a relatively unobstructed path to the transmitter and need fair to good atmospheric conditions to successfully update the time. Inexpensive clocks keep track of the time between updates, or in their absence, with a non-disciplined quartz-crystal clock of similar accuracy to a non-radio-controlled quartz timepiece. Some clocks include an indicator to alert users to possible inaccuracy when synchronization has not been successful within the last 24 to 48 hours.

Other broadcasts

Main article: Time signal
Attached to other broadcast stations
Broadcast stations in many countries have carriers precisely synchronized to a standard phase and frequency, such as the BBC Radio 4 longwave service on 198 kHz, and some also transmit sub-audible or even inaudible time-code information, like the Radio France longwave transmitter on 162 kHz. Attached time signal systems generally use audible tones or phase modulation of the carrier wave.
Teletext (TTX)
Digital text pages embedded in television video also provide accurate time. Many modern TV sets and VCRs with TTX decoders can obtain accurate time from Teletext and set the internal clock. However the TTX time can vary up to 5 minutes.[22]

Many digital radio and digital television schemes also include provisions for time-code transmission.

Digital Terrestrial Television 
The DVB and ATSC standards have 2 packet types that send time and date information to the receiver. Digital television systems can equal GPS stratum 2 accuracy (with short term clock discipline) and stratum 1 (with long term clock discipline) provided the transmitter site (or network) supports that level of functionality.
VHF FM Radio Data System (RDS)
RDS can send a clock signal with sub-second precision but with an accuracy no greater than 100 ms and with no indication of clock stratum. Not all RDS networks or stations using RDS send accurate time signals. The time stamp format for this technology is Modified Julian Date (MJD) plus UTC hours, UTC minutes and a local time offset.
L-band and VHF Digital Audio Broadcasting 
DAB systems provide a time signal that has a precision equal to or better than Digital Radio Mondiale (DRM) but like FM RDS do not indicate clock stratum. DAB systems can equal GPS stratum 2 accuracy (short term clock discipline) and stratum 1 (long term clock discipline) provided the transmitter site (or network) supports that level of functionality. The time stamp format for this technology is BCD.
Digital Radio Mondiale (DRM)
DRM is able to send a clock signal, but one not as precise as navigation satellite clock signals. DRM timestamps received via shortwave (or multiple hop mediumwave) can be up to 200 ms off due to path delay. The time stamp format for this technology is BCD.

Multiple transmitters

A radio clock receiver may combine multiple time sources to improve its accuracy. This is what is done in satellite navigation systems such as the Global Positioning System. GPS, Galileo and GLONASS satellite navigation systems have one or more caesium, rubidium or hydrogen maser atomic clocks on each satellite, referenced to a clock or clocks on the ground. Dedicated timing receivers can serve as local time standards, with a precision better than 50 ns.[23][24][25][26] The recent revival and enhancement of LORAN, a land-based radio navigation system, will provide another multiple source time distribution system.

GPS clocks

Many modern radio clocks use the Global Positioning System to provide more accurate time than can be obtained from terrestrial radio stations. These GPS clocks combine time estimates from multiple satellite atomic clocks with error estimates maintained by a network of ground stations. Due to effects inherent in radio propagation and ionospheric spread and delay, GPS timing requires averaging of these phenomena over several periods. No GPS receiver directly computes time or frequency, rather they use GPS to discipline an oscillator that may range from a quartz crystal in a low-end navigation receiver, through oven-controlled crystal oscillators (OCXO) in specialized units, to atomic oscillators (rubidium) in some receivers used for synchronization in telecommunications. For this reason, these devices are technically referred to as GPS-disciplined oscillators.

GPS units intended primarily for time measurement as opposed to navigation can be set to assume the antenna position is fixed. In this mode, the device will average its position fixes. After approximately a day of operation, it will know its position to within a few meters. Once it has averaged its position, it can determine accurate time even if it can pick up signals from only one or two satellites.

GPS clocks provide the precise time needed for synchrophasor measurement of voltage and current on the commercial power grid to determine the health of the system.[27]

Astronomy timekeeping

Although any satellite navigation receiver that is performing its primary navigational function must have an internal time reference accurate to a small fraction of a second, the displayed time is often not as precise as the internal clock. Most inexpensive navigation receivers have one CPU that is multitasking. The highest-priority task for the CPU is maintaining satellite lock—not updating the display. Multicore CPUs for navigation systems can only be found on high end products.

For serious precision timekeeping, a more specialized GPS device is needed. Some amateur astronomers, most notably those who time grazing lunar occultation events when the moon blocks the light from stars and planets, require the highest precision available for persons working outside large research institutions. The Web site of the International Occultation Timing Association [28] has detailed technical information about precision timekeeping for the amateur astronomer.

Daylight Saving Time

Various of the formats above include a flag indicating the status of daylight saving time (DST) in the home country of the transmitter. This signal is typically used by clocks to adjust the displayed time to meet user expectations.

See also

References

  1. Michael A Lombardi. "How Accurate is a Radio Controlled Clock?" (PDF).
  2. 1 2 3 4 Dennis D. McCarthy, P. Kenneth Seidelmann Time: From Earth Rotation to Atomic Physics Wiley-VCH, 2009 ISBN 3-527-40780-4 page 257
  3. 1 2 3 4 irkutsk.com - Standard time and frequency station RID
  4. "NIST Radio Station WWVB". NIST. Retrieved 18 March 2014.
  5. "BPC". National Time Service Center, Chinese Academy of Sciences. National Time Service Center, Chinese Academy of Sciences. Retrieved 16 March 2013.
  6. Yvonne Zimber (2007-05-09). "DCF77 transmitting facilities". Retrieved 2010-05-02.
  7. "Synchronizing time with DCF77 and MSF60". 090917 compuphase.com
  8. "A Time Station Signal Project for Taiwan".
  9. "长波授时 (Longwave time signal)". National Time Service Center, Chinese Academy of Sciences. National Time Service Center, Chinese Academy of Sciences. Retrieved 16 March 2013.
  10. "科研成果 (Research achievements)". National Time Service Center, Chinese Academy of Sciences. National Time Service Center, Chinese Academy of Sciences. Retrieved 16 March 2013.
  11. "Radio stations in London, England". Retrieved 2016-04-26. Birmingham, Droitwich, 500 kW + Blackwall Tunnel + Rotherhithe Tunnel
  12. "L.F. RADIO-DATA: Specification of BBC phase-modulated transmissions on long-wave" (PDF) (published 2006-10-24). December 1984. The BBC long-wave a.m. transmitter network carries a low bit-rate data signal, in addition to the normal programme signal modulation. The data signal is conveyed by phase-modulation of the carrier
  13. 1 2 3 4 "短波授时 (Shortwave time signal)". National Time Service Center, Chinese Academy of Sciences. National Time Service Center, Chinese Academy of Sciences.
  14. 1 2 "Time Signal Transmitter".
  15. 1 2 3 4 "Rádio-Difusão de Sinais Horários". Observatório Nacional. Retrieved 2012-02-23.
  16. "QSL: MIKES Time Station, Espoo, Finland". SWL DX Blog. 14 May 2014. Retrieved 2016-10-11. Reproduces a QSL letter from MIKES with technical details.
  17. BIPM Annual Report on Time Activities 2010, pages 85-93, retrieved 2011 September 12.
  18. BIPM Annual Report on Time Activities Time Signals
  19. "copy of Heathkit catalog page, Christmas 2003". Retrieved 2008-07-19.
  20. US patent 4,582,434, David Plangger and Wayne K. Wilson, Heath Company, "Time corrected, continuously updated clock", issued 1986-04-15
  21. " Radio controlled clock £19.95
  22. "How's your GHD8015F2 operating? - Personal Video Recorders - Digital Spy Forums". 100506 digitalspy.co.uk
  23. "datasheet i-Lotus TX Oncore" (PDF).
  24. "Symmetricom XL-GPS".
  25. "datasheet Trimble Resolution SMT GG" (PDF).
  26. "datasheet u-blox LEA-M8F" (PDF).
  27. KEMA, Inc. (November 2006). "Substation Communications: Enabler of Automation / An Assessment of Communications Technologies". UTC - United Telecom Council: 3–3.
  28. International Occultation Timing Association
Look up radio clock in Wiktionary, the free dictionary.
Wikimedia Commons has media related to Radio clocks.
This article is issued from Wikipedia - version of the 11/30/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.