Tetrathiafulvalene

Tetrathiafulvalene
Skeletal formula of tetrathiafulvalene
Ball-and-stick model of the tetrathiafulvalene molecule
Names
IUPAC name
2,2’-bis(1,3-dithiolylidene)
Other names
Δ2,2-bi-1,3-dithiole
Identifiers
31366-25-3 YesY
3D model (Jmol) Interactive image
ChEBI CHEBI:52444 YesY
ChemSpider 89848 YesY
ECHA InfoCard 100.045.979
PubChem 99451
Properties
C6H4S4
Molar mass 204.36 g/mol
Appearance yellow solid
Density ? g/cm3
Melting point 116 to 119 °C (241 to 246 °F; 389 to 392 K)
Boiling point decomposes
Solubility in other solvents insoluble in water,
soluble in organic
solvents
Structure
0 D
Hazards
Main hazards combustible
R-phrases 43
S-phrases 36/37
Related compounds
Related compounds
TCNQ,
thiophene
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY verify (what is YesYN ?)
Infobox references

Tetrathiafulvalene is an organosulfur compound with the formula (H2C2S2C)2. Studies on this heterocyclic compound contributed to the development of molecular electronics. TTF is related to the hydrocarbon fulvalene, (C5H4)2, by replacement of four CH groups with sulfur atoms. Over 10,000 scientific publications discuss TTF and its derivatives.[1]

Preparation

The high level of interest in TTFs has spawned the development of many syntheses of TTF and its analogues.[1] Most preparations entail the coupling of cyclic C3S2 building blocks such as 1,3-dithiole-2-thiones or the related 1,3-dithiole-2-ones. For TTF itself, the synthesis begins with the trithiocarbonate H2C2S2CS, which is S-methylated and then reduced to give H2C2S2CH(SCH3), which is treated as follows:[2]

H
2
C
2
S
2
CH(SCH
3
)
+ HBF
4
[H
2
C
2
S
2
CH+
]BF
4
+ HSCH
3
2 [H
2
C
2
S
2
CH+
]BF
4
+ 2 Et
3
N
(H
2
C
2
S
2
C)
2
+ 2 Et
3
NHBF
4

Redox properties

Bulk TTF itself has unremarkable electrical properties. Distinctive properties are, however, associated with salts of its oxidized derivatives, such as salts derived from TTF+.

The high electrical conductivity of TTF salts can be attributed to the following features of TTF: (i) its planarity, which allows π-π stacking of its oxidized derivatives, (ii) its high symmetry, which promotes charge delocalization, thereby minimizing coulombic repulsions, and (iii) its ability to undergo oxidation at mild potentials to give a stable radical cation. Electrochemical measurements show that TTF can be oxidized twice reversibly:

TTF → TTF+
+ -
e
(E = 0.34 V)
TTF+
TTF2+
+ -
e
(E = 0.78 V, vs. Ag/AgCl in MeCN solution)

Each dithiolylidene ring in TTF has 7π electrons: 2 for each sulfur atom, 1 for each sp2 carbon atom. Thus, oxidation converts each ring to an aromatic 6π-electron configuration, consequently leaving the central double bond essentially a single bond, as all π-electrons occupy ring orbitals.

History

Wudl et al. first demonstrated that the salt [TTF+
]Cl
was a semiconductor.[3] Subsequently, Ferraris et al. showed that the charge-transfer salt [TTF]TCNQ is a narrow band gap semi-conductor.[4] X-ray diffraction studies of [TTF][TCNQ] revealed stacks of partially oxidized TTF molecules adjacent to anionic stacks of TCNQ molecules. This “segregated stack” motif was unexpected and is responsible for the distinctive electrical properties, i.e. high and anisotropic electrical conductivity. Since these early discoveries, numerous analogues of TTF have been prepared. Well studied analogues include tetramethyltetrathiafulvalene (Me4TTF), tetramethylselenafulvalenes (TMTSFs), and bis(ethylenedithio)tetrathiafulvalene (BEDT-TTF, CAS [66946-48-3]).[5] Several tetramethyltetrathiafulvalene salts (called Fabre salts) are of some relevance as organic superconductors.

See also

References

  1. 1 2 Bendikov, M; Wudl, F; Perepichka, D. F. (2004). "Tetrathiafulvalenes, Oligoacenenes, and Their Buckminsterfullerene Derivatives: The Brick and Mortar of Organic Electronics". Chemical Reviews. 104 (11): 4891–4945. doi:10.1021/cr030666m. PMID 15535637.
  2. Wudl, F.; Kaplan, M. L. (1979). "2,2'Bi-1,3-dithiolylidene (Tetrathiafulvalene, TTF) and Its Radical Cation Derivatives". Inorg. Synth. Inorganic Syntheses. 19: 27–30. doi:10.1002/9780470132500.ch7. ISBN 978-0-470-13250-0.
  3. Wudl, F.; Wobschall, D.; Hufnagel, E. J. (1972). "Electrical Conductivity by the Bis(1,3-dithiole)-bis(1,3-dithiolium) System". J. Am. Chem. Soc. 94 (2): 670–672. doi:10.1021/ja00757a079.
  4. Ferraris, J.; Cowan, D. O.; Walatka, V. V., Jr.; Perlstein, J. H. (1973). "Electron transfer in a new highly conducting donor-acceptor complex". J. Am. Chem. Soc. 95 (3): 948–949. doi:10.1021/ja00784a066.
  5. Larsen, J.; Lenoir, C. (1998). "2,2'-Bi-5,6-Dihydro-1,3-Dithiolo[4,5-b][1,4]dithiinylidene (BEDT-TTF)". Org. Synth.; Coll. Vol., 9, p. 72

Further reading

This article is issued from Wikipedia - version of the 7/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.