Temple architecture (LDS Church)

On December 27, 1832—two years after the organization of the Latter Day Saint church—the movement's founder, Joseph Smith, reported receiving a revelation that called upon church members to restore the practice of temple worship. The Latter Day Saints in Kirtland, Ohio were commanded to:

"Establish a house, even a house of prayer, a house of fasting, a house of faith, a house of learning, a house of glory, a house of order, a house of God."[1]

Latter-day Saints view temples as the fulfillment of a prophecy found in Malachi 3:1 (KJV).

The Kirtland Temple was the first temple of the Latter Day Saint movement and the only temple completed in Smith's lifetime. Its unique design was replicated on a larger scale with the Nauvoo Temple and in subsequent temples built by the church. As the needs of the church have changed, so has Temple architecture—from large castellic structures adorned with celestial symbols, to smaller, simpler designs, often derived from a standard set of plans.

Comparison of several LDS Temples

Kirtland Temple

Main article: Kirtland Temple

The Kirtland Temple, built in Kirtland, Ohio, was not designed as a church or cathedral. It was a house of learning, where the School of the Prophets could meet. This temple was not built to accommodate the endowment ceremony, which was taught later. It has no baptistry, as the revelation regarding baptism for the dead had not yet been received. The structure has two unique sets of pulpits, representing the Aaronic Priesthood and the Melchizedek Priesthood. Truman O. Angell recorded in his journal that about this time Frederick G. Williams, one of President Smith's counselors, came into the temple during construction and related the following:

Joseph received the word of the Lord for him to take his two counselors, Frederick G. Williams and Sidney Rigdon, and come before the Lord and He would show them the plan or model of the house to be built. We went upon our knees, called on the Lord, and the building appeared within viewing distance, I being the first to discover it. Then all of us viewed it together. After we had taken a good look at the exterior, the building seemed to come right over us, and the makeup of this hall seemed to coincide with what I there saw to a minutia.[2]

Angell continued as church architect, designing the Salt Lake Temple, the Lion House, the Beehive House, the Utah Territorial Statehouse, the St. George Utah Temple, and many other public buildings.

The Kirtland Temple

The sandstone used to build the temple was quarried from south of the Temple. Native timbers were cut from the surrounding forests.[3] The Temple, begun in 1833 and dedicated in 1836, was one of the largest buildings in Northern Ohio. It is a combination of Greek, Georgian, Gothic, and Federalist architectural styles. The building has been designated a National Historical Landmark and has been recognized by the Architects Society of Ohio and the Ohio Historical Society.[3]

The pulpits and the pews are among the distinctive features of the interior. Two sets of pulpits grace the main floor with another two sets on the second floor. The seats in the pew boxes are benches that can be shifted from the back to the front, thus making it possible for the congregation to face either the front or the rear pulpits.[3]

The main floor of the Kirtland Temple was used for various services of worship, and the second floor was a school for the ministry. The third floor contained rooms for the "Kirtland High School" during the day and Church quorum meetings in the evening. The west third floor room was Joseph Smith, Jr.'s office.[3]

Nauvoo Temple

The original Nauvoo Temple was built in 1846; it was rebuilt in 2002

Construction of the original Nauvoo Temple commenced April 6, 1841, and its final dedication was in May 1846. The temple was designed in the Greek Revival style by Mormon architect William Weeks, under the direction of Joseph Smith, Jr. Weeks' design made use of distinctively Latter-day Saint motifs, including sunstones, moonstones, and starstones, representing the Three Degrees of Glory in the Mormon conception of the afterlife (D&C 76: 70-81). The placement of the symbols on the building in descending order—starstones, sunstones, and moonstones—does not support the above assertion, but rather a reflection of Revelation 12:1.[4]

At its base the building was 128 feet (39 m) long and 88 ft (27 m) wide, with a clock tower and weather vane reaching to 165 ft (50 m)—a 60% increase over the dimensions of the Kirtland Temple. Like Kirtland, the Nauvoo Temple contained two assembly halls, one on the first floor and one on the second, called the lower and upper courts. Both had classrooms and offices in the attic. Unlike Kirtland, the Nauvoo Temple had a full basement, which housed a baptismal font.

A Sunstone from the original Nauvoo Temple in a case in front of The Church of Jesus Christ of Latter-day Saints Visitor Center in Nauvoo, Illinois

Symbolic placement of the rooms

The location of the rooms is symbolic. Each room represents progression, and is therefore located in a different elevation based on that progression. This symbolic progression was first used in the Nauvoo temple, and has been continued in some subsequently built temples. The baptistry was the lowest room of the temple, often in the basement. The ordinance rooms are elevated above that, leading to the Celestial room which is, in some cases, even higher. In the case of the Nauvoo temple, this would have been in the attic. The sealing rooms are the loftiest rooms of the temple.

Basement

The basement of the Nauvoo Temple, used as the baptistery, contained a large baptismal font in the center of the main room. The basement proper was 100 ft (30 m) long and 40 ft (12 m) wide with six rooms of varying size on either side. Approximately 12 ft (3.7 m) east of the entrance to the baptistery and 10 ft (3.0 m) from either the side of the support piers rested blocks, roughly 14 in (360 mm) square, which projected 7 in (180 mm) above the brick floor. These objects are not mentioned in any account of the basement, and their purpose is unknown.[5]

The font, built of tongue and grooved white pine, was painted white. It was sixteen feet long, twelve feet wide, and four feet deep. The lip of the font was seven feet from the floor. The font's cap and base were carved molding in an "antique style" and the sides were finished with panel work. Two railed stairways led to the font from the north and south sides.[5] A well on the east side of the font provided the water supply.[5]

Great Hall

Floor plan of the Nauvoo Temple first floor "Great Hall" and vestibule

A flight of eight broad steps led to a landing where two more steps entered three archways. These archways led to the vestibule, the formal entrance to the temple. The archways were approximately 9 ft (2.7 m) wide and 21 ft (6.4 m) high.

Two large double doors on the east wall opened to the first floor assembly hall of the lower court, known as the "Great Hall", which occupied the remainder of the floor space east of the vestibule. Two doors, one on the north wall and another on the south, opened to the landing of two spiral staircases, one in the northwest corner and the other in the southwest corner, which led to the attic. These were the only access points to the rest of the building. The room was flanked on either side by seven large, arched windows, with four similar windows along the east wall. An arched ceiling spanned some 50 ft (15 m) in breadth, in the center. The floor was stained wood and the walls were painted white.[5]

One report stated that on the east wall of the vestibule was an entablature, similar to the one in the facade, which read in bright gilded letters, "THE HOUSE OF THE LORD – Built by The Church of Jesus Christ of Latter-Day Saints – Commenced April 6th, 1841 – HOLINESS TO THE LORD."[5]

At the east and west ends of the hall were two sets of similar pulpits. They were arranged with four levels, the top three consisting of a group of three semi-circular stands. The lowest level was a drop table which was raised for use in the sacrament.[5] The pulpits to the east, standing between the windows, were reserved for the Melchizedek Priesthood. Written in gilded letters along the arch of the ceiling, above the eastern pulpits, were the words "The Lord Has Seen Our Sacrifice – Come After Us."[5] The pulpits to the west end were reserved for the Aaronic Priesthood.[5]

The hall was fitted with enclosed pews with two aisles. The room could accommodate up to 3,500 people. Because there were pulpits on both ends of the room, the pews had movable backs which could be swung to face either direction, depending on who was presiding – the Melchizedek Priesthood or the Aaronic Priesthood.[5] The first floor also included a mezzanine with fourteen small rooms.

Stairwells

The two stairwells were constructed of dressed limestone walls. One rose from the northwest corner and the other from the southwest corner of the temple. They were not true circles but were flattened on four sides. Nor were they symmetrical, being 16 ft (4.9 m) in diameter from east to west and 17 ft (5.2 m) in diameter from north to south. This was done to support landings and other support structures.[5]

The staircases, made of wood, provided access to all levels of the temple, with a landing at each floor. The southwest staircase was completely finished, but the staircase in the northwest corner was never completed—it was roughed in with temporary boards resting on the risers. Workmen used this staircase to gain access to the building during its construction, especially during the winter of 1845–1846, when persons were using the other staircase to reach the attic for ordinance work.[5]

Second floor assembly hall

Floor plan of the Nauvoo Temple second floor assembly hall

The second floor hall was similar in construction to the Great Hall, except that it included the foyer area, the location of the vestibule. This made the room about seventeen feet longer than the Great Hall. A 41-foot-long (12 m) stone arch ran north and south between the circular stairwells supporting the massive timbers for the tower above. The room had seven large windows along the north and south wide, with four windows along the east wall.[5]

The floor would have had a similar configuration as the Great Hall with a set of double pulpits and pews, but the interior was never completed. The room was furnished with wooden benches for an occasional meeting.[5] The second floor hall also included a mezzanine with fourteen small rooms.

Attic

Floor plan of the Nauvoo Temple attic

At the top of the two stairways, opening to a foyer, was the attic floor. The attic was not built of limestone but of wood. The west end of the temple was a flat-roofed section that supported the tower. The rest of the attic was a pitched-roof section running the length of the temple.[5] The area was illuminated by six windows along the foyer's west wall. Outside windows also provided light along the north and south sides. The roof had four octagonal skylight windows to provide light to the interior rooms, in addition to a twenty-foot arched window.[5]

Tower rooms

Rising from the plateau of the attic is an octagonal tower. The tower was divided into three sections, each accessible by a series of stairways leading from the attic to an observation deck above. The lowest section was a belfry containing a bell, which was rung for various occasions. Between the observation deck and the belfry was a section containing the four clockwork mechanisms.[5]

Reconstruction

In 1999 it was announced the temple would be rebuilt with the same exterior look of the original temple. On June 27, 2002, the Nauvoo Illinois Temple was dedicated. The limestone used for the original temple was quarried from a site just west of the temple. The stone for the new temple was quarried in Russellville, Alabama, a site chosen specifically because the stone best matched the original.

The reconstructed baptistery follows the original, with the addition of a metal lining to prevent deterioration and a platform where witnesses may sit. The floor of the baptistery, the largest of any temple in the church, was replicated in red brick tile. A dome and chandelier are featured in the ceiling and art glass window is on the east end. The room has intricate crown moldings. The window moldings included framework for six-pointed stars made of red, white, and blue glass to replicate the originals.

Castellated temples of Utah

St. George Utah Temple

St. George Temple

The St. George Utah Temple (1), described as castellated Gothic style. has three ordinance rooms and eighteen sealing rooms. It has a total floor space of 110,000 sq ft (10,000 m2).[6]

The temple was originally patterned after the Kirtland and Nauvoo Temples, with two large assembly halls featuring a set of pulpits at each end. The lower hall was partitioned with screens for presentation of the endowment. It was extensively remodeled from 1937 to 1938, when the lower hall was permanently divided into five progressive-style endowment rooms.

About a year after the original dedication, a lightning storm caused extensive damage to the original tower. It was replaced with a taller, more majestic tower.

Following a second major renovation project in 1975, the progressive-style ordinance rooms were replaced with three motion-picture ordinance rooms. Live-acting endowment sessions were much longer and only three were performed a day. The film version allows for fourteen sessions a day.

Logan Utah Temple

Main article: Logan Utah Temple
Logan Utah Temple

The Logan Utah Temple (2) was the first temple to feature progressive-style ordinance rooms for presentation of the endowment ceremony. This design has a room symbolizing each stage of man's progression: the Creation room, representing the events of Genesis; the Garden room represents the Garden of Eden, where Adam and Eve lived prior to the fall of man; the World room, where Adam and Eve lived after the fall; the Terrestrial room; and the Celestial room, representing heaven.

In addition to these ordinance rooms, the temple has eleven sealing rooms with a total floor area of 119,619 sq ft (11,113 m2). The temple is the only temple to be completely gutted and rebuilt. The two-year project replaced the progressive-style ordinance rooms with motion-picture ordinance rooms. Spencer W. Kimball, the church president who rededicated the completed temple in 1979, regretted the need to reconstruct the interior of the temple because of the loss of pioneer craftsmanship.[7]

The exterior walls of the Logan Utah Temple were originally painted a buff color to hide the dark, rough-hewn limestone. In the early 1900s, however, the paint was allowed to weather away, uncovering the beautiful stone that characterizes the temple today.

Manti Utah Temple

Main article: Manti Utah Temple
Manti Utah Temple

The Manti Utah Temple (3) is described as castellated style with influences of Gothic Revival, Neo-Renaissance, Second Empire and Colonial Revival architecture.[8] The temple has four progressive-style ordinance rooms and eight sealing rooms. The total floor area is 100,373 sq ft (9,325 m2). It is the oldest temple which has preserved the original mural paintings. One of the more dramatic engineering marvels of the early Mormon pioneers are the open-center spiral staircases that wind up each of the 179-foot (54 m) towers. The Manti Temple is one of two temples (Salt Lake being the other) where the endowment is still performed with live actors, rather than on film.

Salt Lake Temple

Main article: Salt Lake Temple
Salt Lake Temple

The Salt Lake Temple (4) is the most recognizable of all Latter-day Saint temples and is an international symbol of the church. It is the largest temple of the church, with a total floor area of 385,000 square feet (35,800 m2). (The Los Angeles California Temple was larger before the Salt Lake temple was expanded.) The first of the castellated temples to be started, it was the last to be completed, after 40 years of construction.

Angel Moroni atop the Salt Lake Temple

The Temple is intended to evoke the Temple of Solomon at Jerusalem, and it is oriented towards Jerusalem. The large basin used as a baptismal font is mounted on the backs of twelve oxen, as was the brazen sea in Solomon's Temple.[9]

The building has six spires, suggestive of Gothic and other classical styles but unique, distinctive, and symbolic. It has four progressive-style ordinance rooms and twelve sealing rooms.

The walls of the Salt Lake Temple are nine feet thick at the base and six feet thick at the top. It was the first temple to feature the prominent standing angel Moroni statue, which was created by Paris-trained sculptor Cyrus E. Dallin. Prior to that, the Nauvoo temple sported a flying angel weather vane. Of the dozen temples built from the construction of the Salt Lake Temple until the 1980s, only the Los Angeles had a similar statue. Moroni statues then became a standard part of nearly all LDS temples, and have been added to several temples originally built without them.

The angel Moroni depicts both a messenger of the restoration of the gospel and a herald of the Second Coming: "for the Son of Man shall come, and he shall send his angels before him with the great sound of a trumpet, and they shall gather together the remainder of his elect from the four winds" (JS-M 1:37).

The Salt Lake Temple features murals on the walls of its progressive-style ordinance rooms, excluding the Terrestrial room and Celestial room, which is adorned in an elaborate French Renaissance Revival style.

This is the most symbolically adorned temple, surpassing the spiritual motifs of the Nauvoo Temple.

The east and west towers represent the Melchizedek and Aaronic Priesthoods, just as the east and west facing pulpits did in the Kirtland and Nauvoo assembly halls.[10] Additional symbolism has been added to the towers. The east-facing towers represent the First Presidency of the Church, the highest office of the Melchizedek Priesthood. The west towers represent the Presiding Bishopric, the highest office of the Aaronic Priesthood. There are twelve pinnacles on each tower; the east pinnacles represent the office of the Twelve Apostles, and the west pinnacles represent the High Council.

Castle-like battlements surround the temple, symbolizing a separation from the world and a protection of the holy ordinances from the outside world.

At the base of each buttress is an earthstone. Earthstones represent the Earth, the "footstool of God". The earth itself is in a telestial state, but will transition into a terrestrial state with the coming of the Millennium, and will finally receive Celestial glory at the end of the one thousand years.

Top of east side Center Spire featuring cloudstones, starstones, sunstones, and eye of God

Moonstones are located directly above the earthstones. Each moonstone is depicted in a different phase. The changing moon represents the stages of human progression from birth and life to death and resurrection. It also represents one's journey from total darkness into the full light of Christ. Above the moonstones are sunstones, representing celestial glory.

Two cloudstones are carved on the east center tower, with descending rays of light. The original plan was to have one stone be white and the other black, with descending trumpets. The parallel of this symbolism is found in the Old Testament. Once temples were dedicated in ancient Israel, they were filled with the "cloud of the Lord." At Mount Sinai, the children of Israel saw this cloud as both dark and bright accompanied by the blasting of a trumpet.

Various starstones adorn the temple. Six-pointed stars represent the stars in the heaven. Inverted five-pointed stars represent morning stars, compared to the "sons of God" in the scriptures. The large upright five-pointed stars may represent the governing power of the priesthood, while the small upright five-pointed stars may represent the saving power of the priesthood for those who attach themselves to it.

The center west tower has a depiction of the Big Dipper constellation. This represents the method travelers have used for thousands of years to find the North Star. This symbolized the purpose of the temple in showing the way to God.

Each of the center towers features a pair of clasped right hands identified as the "right hands of fellowship" cited in Galatians 2:9. In Jeremiah 31:32, the Lord uses the handclasp to denote covenant making—an act at the very heart of temple worship.

Each of the center towers has a carved All Seeing Eye of God, which represents God's ability to see and know all things.

Temples with no spire

Cardston Alberta Canada Temple

The construction of the Cardston Alberta Temple (6), on June 27, 1913, started two decades after the completion of the Salt Lake Temple. The temple at Cardston was the first design to be put out to bid to prominent architects, and the first to be designed without a priesthood assembly hall. This began a transition away from multi-purpose temples. The Cardston temple has 88,562 sq ft (8,228 m2) of floor space and is described as an "octagonal design with no spire—similar to Maltese cross—it has Grecian massiveness and a Peruvian touch of Aztec influence with pyramid silhouette."[11] It has four ordinance rooms and five sealing rooms.

The design of the Cardston Alberta Temple served as the basic pattern for the Laie Hawaii Temple (5), which was completed four years before the Cardston temple. World War I caused the construction delay. Cardston was also the pattern for the third temple built after Salt Lake, the Mesa Arizona Temple (7). These three temples, the first built outside of Utah, are often described as having the style of Solomon's temple.

The Laie Temple design is "suggestive of the ancient temples found in South America—shaped like a Grecian cross with no tower."[12] The top of the temple is decorated with carved friezes. Each side depicts four dispensations of time: Old Testament Dispensation (west), New Testament Dispensation (south), Book of Mormon Dispensation (north), and Latter-day Dispensation (east). It is the smallest of the three temples, with a total floor area of 47,224 sq ft (4,387.3 m2), three ordinance rooms, and six sealing rooms.

The Cardston and Mesa temples were originally built about the same size, but an addition in 1974 to the Mesa temple expanded its area to 113,916 sq ft (10,583 m2). It is described as a "modification of the classic style, suggestive of pre-Columbian temples and the Temple of Herod."[13] It has four ordinance rooms and nine sealing rooms, expanded from the original four sealing rooms.

Modern center spire design

Idaho Falls Idaho Temple
Provo Utah Temple

The Idaho Falls Idaho Temple (8) was the first temple designed with a central spire. This design represented a return to the use of spires, as the three previously dedicated temples featured no towers or spires. It has four progressive-style ordinance rooms and nine sealing rooms. The floor area is 92,171 sq ft (8,563 m2).

The Oakland California Temple (13) is an unusual variation on the center spire design because it incorporates four additional spires—one on each corner of the building—for a total of five. The center spire is the tallest. It is the only temple with five spires. With a floor area of 95,000 sq ft (8,800 m2), it was built slightly larger than the Idaho Falls temple, and contains four ordinance rooms and seven sealing rooms.

With the construction of the Ogden Utah Temple (14), the design was expanded, with six ordinance rooms and eleven sealing rooms and a floor area of 115,000 sq ft (10,700 m2). The trend continued with the Provo Utah Temple (15), and eight years later with the Jordan River Utah Temple (20). Each temple was larger than the last (128,325 sq ft (11,921.8 m2) and 148,236 sq ft (13,771.6 m2), respectively), and added more sealing rooms: twelve for Provo and seventeen for Jordan River.

Modern single-spire design

Bern Temple in 2008

The first temple built in Europe was the Bern Switzerland Temple (9). Its distinctive design diverged from the Idaho Falls temple to one reminiscent of older temples like Kirtland and Nauvoo, but with a more contemporary design. This temple was designed to show a film of the presentation of the endowment, rather than live actors, to accommodate the many languages of Europe. Originally built with one ordinance room and three sealing rooms, the temple was remodeled in 1992 to update of the interiors and add ordinance and sealing rooms. The temple now has four ordinance rooms and seven sealing rooms. It has a floor area of 35,545 sq ft (3,302.2 m2). In 2005, an angel Moroni statue was added to the spire in commemoration of the temple's 50th anniversary.

Los Angeles California Temple

The Los Angeles California Temple (10), the largest temple built by the church, was dedicated in 1956. It is now second to the Salt Lake temple in size due to renovations that expanded the flagship structure. It was the first temple since Salt Lake to have a priesthood assembly room, added to the plans when World War II delayed construction. It would be the last temple designed for a live-actor presentation of the endowment. The ordinance rooms are filled with murals, and is one of only three temples with murals in the Celestial Room (the others being the Idaho Falls Temple and the Nauvoo Illinois Temple).

When the statue of Moroni was installed, it faced southeast (as does the temple), but was shortly turned to face due east at the request of church president David O. McKay. In 2003, the temple was changed to a progressive-style presentation, with a newly renovated Terrestrial Room. The endowment was still presented on film. In November 2005 the temple was closed for a seismic overhaul and a renovation of the baptistery, which had drainage and mildew problems. It reopened July 11, 2006, fifty years after the original dedication.

In addition to the Celestial room, the temple has four ordinance rooms (Creation room, Garden room, World room, Terrestrial room), and ten sealing rooms. It has a square footage of 190,614 sq ft (17,708.6 m2).

Following the basic design of the Bern temple, the Hamilton New Zealand Temple (11) was dedicated in 1958. It was built, along with the Church College of New Zealand, entirely by volunteer missionary labor, and was the first temple of the church in the southern hemisphere. It has one ordinance room and three sealing rooms. The floor space is 44,212 sq ft (4,107 m2).

London England Temple

Main article: London England Temple

The London England Temple (12), dedicated in 1958, follows the same basic pattern of the Bern and Hamilton temples. The temple was renovated in 1992 to include four ordinance rooms and seven sealing rooms. The floor area is 46,174 sq ft (4,290 m2).

The next temple to incorporate this style would be built in 1980. Unlike the other temples, the Seattle Washington Temple (19) was designed from the beginning to have four ordinance rooms and twelve sealing rooms. It is larger than Bern, Hamilton, and London, at 110,000 sq ft (10,000 m2).

Ten years later the church built four temples, similar in style, based on the single-spire design. These temples all have four ordinance rooms and four sealing rooms. With sizes ranging from 57,000 to 69,600 sq ft (5,300 to 6,470 m2), these temples are stylistically unique, although the Boston Massachusetts Temple (100), dedicated in 2000, resembles the St. Louis Missouri Temple (50), built three years earlier. The other temples are the Preston England Temple (52), built in 1998, and the unique Santo Domingo Dominican Republic Temple (99), built in 2000.

Lawsuits arguing that the Dover Amendment unfairly discriminates against non-religious groups[14] delayed the addition of the spire of the Boston temple by several years as the courts decided whether the spire was a required element of the design of the temple. In support of the Dover Amendment, which exempts religious structures from local zoning laws, the court continually sided with the church. Chief Justice Margaret H. Marshall wrote in the 17-page ruling, "A rose window at Notre Dame Cathedral, a balcony at St. Peter's Basilica, are judges to decide whether these architectural elements are 'necessary' to the faith served by those buildings?"[15][16][17]

Some recently constructed temples have returned to this earlier style, with two floors and a smaller building, with fewer ordinance and sealing rooms.

Small modern single-spire design

In the mid-1970s, beginning with the São Paulo Brazil Temple (17) and the Tokyo Japan Temple (18), the church designed temples based on a more chapel-like design: square buildings with a smaller spire. These first two temples had two ordinance rooms, but because there was no set plan during this time, the temples have four and five sealing rooms, respectively.

Shortly after these temples were built the church built a larger version: the Atlanta Georgia Temple (21). It has four ordinance rooms and five sealing rooms and a floor area of 35,360 sq ft (3,285 m2). Later the church would repeat this pattern with two similar temples: the Denver Colorado Temple (40) and the much larger Toronto Ontario Temple (44), each with six sealing rooms.

The Apia Samoa Temple (22) was built at this time, but during a renovation, the building caught fire and was destroyed. It was immediately rebuilt with a larger design, but still with a single spire. It has two ordinance rooms and two sealing rooms, with a total floor area of 18,691 sq ft (1,736.5 m2).

Similar two ordinance room temples are the Nuku'alofa Tonga Temple (23) and the Santiago Chile Temple (24), with three sealing rooms, and the Papeete Tahiti Temple (25) and the Sydney Australia Temple (28), with two ordinance rooms.

Freiberg Germany Temple

Located in Freiberg, Saxony, Germany, the Freiberg Germany Temple (33) was announced in October 1982, ground was broken for construction on April 23, 1983, and the temple was dedicated in 1985. Built in what was then the German Democratic Republic, the Freiberg Germany Temple is the only LDS temple to have been built in a communist state.

The East German government approved the building of the temple on practical grounds, because of the many Latter-day Saints requesting visas to travel to Switzerland, the location of the Bern Switzerland Temple. The government wished to minimize citizens' travel outside the country.

The temple was built on a very small scale, with no outward adornment of any kind. No oxen were used in the baptistery and only the bare minimum functional details were allowed inside.

After German reunification in 1990, Germany became the first country outside of North America to have more than one temple, this and the Frankfurt Germany Temple.

Political changes in Germany allowed for renovation of the temple from 2001 to 2002 to the high standards of temples built today. Additional square footage extending to the east approximately doubled the size of the temple. New amenities include the installation of twelve oxen to support the baptismal font, a non-patrons waiting room, a matron/brides room, and an office for the temple president. On December 20, 2001, an angel Moroni was placed atop the temple.[18] The temple is small, with one ordinance room and two sealing rooms and a total floor area of 14,126 sq ft (1,312.3 m2).

Six spire sloped roof

The first temple built in the six-spire sloped roof style was the Boise Idaho Temple, the design of which started after its announcement on March 31, 1982. Early examples of this design proved inadequate: Boise, Dallas, and Chicago were closed for extensive renovations not long after opening. These renovations restructured rooms, added facilities, and made other enhancements that significantly improved the buildings.[19] The last temple built in this style was the Las Vegas Nevada Temple, which was completed in 1989. This style was then largely replaced by the classic modern, single-spire design. The unifying concept behind this style was the six spires and the sloped roof. Other than those factors, the temples varied widely in size and capacity, as illustrated in the table below:

Johannesburg Temple
Frankfurt Germany Temple
Temple Number Dedicated Square
Feet
Ordinance Rooms Sealing Rooms
Boise Idaho Temple 27 1984 35,325 4 4
Manila Philippines Temple 29 1984 26,683 4 3
Dallas Texas Temple 30 1984 46,956 5 5
Taipei Taiwan Temple 31 1984 16,000 4 3
Guatemala City Guatemala Temple 32 1984 11,610 4 3
Stockholm Sweden Temple 34 1985 14,508 4 3
Chicago Illinois Temple 35 1985 29,751 5 4
Johannesburg South Africa Temple 36 1985 19,184 4 3
Seoul Korea Temple 37 1985 28,057 4 3
Lima Peru Temple 38 1986 9,600 4 3
Buenos Aires Argentina Temple 39 1986 17,683 4 3
Frankfurt Germany Temple 41 1987 24,170 4 5
Portland Oregon Temple 42 1989 79,220 4 14
Las Vegas Nevada Temple 43 1989 80,350 4 6

Classic modern, single-spire design

The classic modern, single-spire design heralded an era where the temples square off the roof and return to a single spire design. These temples tend to be larger, with the smallest temple at 45,800 sq ft (4,250 m2), and the largest at 104,000 sq ft (9,700 m2) (compared to the earlier six-spire designs, with the smallest at 9,600 sq ft (890 m2) and the largest at 80,350 sq ft (7,465 m2)). All of the temples built in this style were dedicated between 1994 and 1999, with the exception of the Campinas Brazil Temple, which was not dedicated until 2002.

Mount Timpanogos Utah Temple, the largest temple built from a general set of plans
Temple Number Dedicated Square
feet
Ordinance rooms Sealing rooms
Orlando Florida Temple 46 1994 70,000 4 5
Bountiful Utah Temple 47 1995 104,000 4 8
Mount Timpanogos Utah Temple 49 1996 107,000 4 8
Madrid Spain Temple 56 1999 45,800 4 4
Bogotá Colombia Temple 57 1999 53,500 4 3
Guayaquil Ecuador Temple 58 1999 70,884 4 3
Campinas Brazil Temple 111 2002 48,100 4 3

Small temple pilot design

Monticello Utah Temple

The Monticello Utah Temple (53) was chosen as the pilot temple for the first of the new generation of very small temples. Originally designed with one ordinance room and one sealing room and a small baptistry, this temple only had 6,800 sq ft (630 m2) of space. These temples have no offices or laundry facilities. The changing rooms are small, and there are no waiting rooms. The single ordinance room acts as the Creation Room, Garden Room, World Room, and Terrestrial Room, leading to the adjacent Celestial Room.

The temples were built next to existing chapels so the business of the temple could be conducted in the offices of the adjacent church. Temples will continue to be built on existing land adjacent to existing chapels, but the offices of the temple will be in the temple itself.

In 2002 an additional 4,000 sq ft (370 m2) were added to the Monticello temple to add a second ordinance room and sealing room, a waiting room, offices for temple workers, and laundry facilities.

The Anchorage Alaska Temple (54) was built next, and was subsequently expanded to include a second ordinance room, offices for temple staff, new men's and women's dressing rooms, a patron waiting room, a laundry facility, and an elevator to a new second floor for a total square footage of 11,937.

The Colonia Juárez Chihuahua México Temple (55) was built next, and has not been altered from the original design. This is the smallest temple built by the church.

Because the temples proved to be too small , the church quickly moved to a larger plan that included a second ordinance room, called the Terrestrial Room, and sealing room, offices, a patron waiting room, and laundry facilities.

Small identical design

The Spokane Washington Temple was the first of the small temples built from an identical set of plans.

Spokane Washington Temple

Beginning with the dedication of the Spokane Washington Temple on August 21, 1999, by Gordon B. Hinckley, the church began an aggressive temple building cycle, constructing dozens of temples using relatively identical models and floorplans. Described as a "classic modern, single-spire design," these temples have two progressive ordinance rooms and two sealing rooms.[20] Total floor area for these temples is 10,700 sq ft (990 m2). The exteriors have slightly different finishes. Most are granite or marble quarried from regional quarries such as Imperial Danby White variegated marble quarried from Vermont, which was used in many temples in the United States. The temples built in Australia and Fiji used granite imported from Italy. Other than minor variations in finish, landscaping, and setting, these temples are virtually identical.

List of identical temples

Variations in design

Occasionally the church would change the design slightly adding or removing square footage, but keeping the general design the same, with two ordinance rooms and two sealing rooms. Other temples have distinct modifications to their exteriors and size.

Additional sealing room

The church built several temples based on the two ordinance room plan, but added more square footage to accommodate an additional sealing room. These temples vary in size and style, although some look similar to the original design. Often plans were modified because local residents balked at the idea of such a large temple in their neighborhood. For example, the Sacramento temple was originally designed to be a much larger structure, but because of opposition, the design was changed to model the Newport Beach temple design.

The temples vary in size. The last three temples built are around 17,000–19,000 sq ft (1,600–1,800 m2), and the others are around 34,000 sq ft (3,200 m2).

Other styles

Washington D.C. Temple

Washington D.C. Temple

The Washington D.C. Temple (16), located in Kensington, Maryland, was the first temple built on the east coast of the United States. It was built with a modern six-spire design, with the three towers to the east representing the Melchizedek Priesthood leadership, and the three towers to the west representing the Aaronic Priesthood leadership. The central eastern tower reaches a height of 288 ft (88 m), the tallest of any LDS temple.

A very large plot of land on a wooded hill was bought in 1962 and eleven acres were cleared for the temple. The rest of the land was left untouched to give the temple a remote feeling. The temple was designed to be similar in style and form to the Salt Lake Temple so that it would be easily recognized as a temple of The Church of Jesus Christ of Latter-day Saints. The angel Moroni statue, which stands atop the tallest tower, is 18 ft (5.5 m) tall and weighs 4,000 pounds (1,800 kg). Although the temple appears to not have any windows, from the inside the thinly cut marble appears translucent. The Washington D.C. temple has a total floor area of 160,000 sq ft (15,000 m2), making it the third largest LDS temple. It holds six ordinance rooms and fourteen sealing rooms.

México City México Temple

The Mexico City temple, built in Mayan Revival style.

The México City México Temple (26) is located in the northeastern part of the Mexican capital, Mexico City. It is heavily influenced by Mayan Revival architecture, with Aztec and Mayan elements, but is still similar to the center spire design.. It is the largest temple outside the United States.

The temple was built on a 7-acre (2.8 ha) plot, has four ordinance rooms and 11 sealing rooms, and has a total floor area of 116,642 sq ft (10,836.4 m2). It was the first of twelve Mormon temples built in Mexico.

San Diego California Temple

The San Diego California Temple (45) is located in the La Jolla district of San Diego. It was built with two main spires, but unique to this temple are four smaller spires at the base of each main spire. The East spire is topped with the angel Moroni, which adorns most LDS temples.

The exterior finish is marble chips in plaster, giving the building a bright white glow. Just off Interstate 5, the temple is a major landmark when traveling the highway toward or away from San Diego. The temple is brightly illuminated at night.

The temple was built on a 7.2-acre (2.9 ha) plot, has four ordinance rooms and eight sealing rooms, and has a total floor area of 72,000 sq ft (6,700 m2).

Hong Kong China Temple

The Hong Kong China Temple (48) was built on the site of an existing mission home and meetinghouse. Because of the cramped situation of Hong Kong, the temple had to be built up instead of spreading out, a situation which contributed to the temple's unique design. The six-story building is designed to house not only the temple, but also a chapel, mission offices, and living quarters for the temple president and several missionaries. This is similar to the Manhattan New York Temple, which was adapted from an existing building.

It has a total of 21,744 sq ft (2,020.1 m2), two ordinance rooms, and two sealing rooms.

Adapted buildings

The Vernal Utah Temple was adapted from an existing building

Originally, the Vernal Utah Temple (51) served as the Uintah Stake Tabernacle for Latter-day Saints in eastern Utah. The Tabernacle's foundation was constructed of nearby sandstone, with walls built of four layers of fired brick from local clay. Constructed using considerable donated labor from the fall of 1899, it was dedicated on August 24, 1907, by LDS Church president Joseph F. Smith. Smith reportedly said he would not be surprised if a temple was built there some day.

Roger Jackson characterized the Uintah Stake Tabernacle as relatively modest, without the decorative details found on tabernacles in central and northern Utah. Nonetheless, he wrote, "the building is the most prominent structure in Vernal and considered the finest building in all of eastern Utah."

The tabernacle was superseded by an adjacent, more modern LDS stake center in 1948. Only used irregularly thereafter, the LDS Church announced the tabernacle's closing in 1984 for public safety reasons. Among other things, the tabernacle lacked indoor bathrooms and access for the disabled.

A local "Save the Tabernacle" committee formed, and in 1989 a preservation study was prepared. The LDS Church opted to turn the building into one of its new smaller temples, and plans were announced in 1994. In addition to preserving the exterior, bringing the building up to code, and altering the floor plan, the eastern spire of the temple was elongated to make it taller than the spire of the neighboring stake center. An east-facing golden statue of angel Moroni was placed on top of the spire. When discussing the problems involved with converting the old, deteriorated building into an acceptable modern temple, LDS Church president Gordon B. Hinckley remarked that the church would never attempt that again.

The Copenhagen Denmark Temple was adapted from an existing building

The Copenhagen Denmark Temple (118) is a renovation of an existing building, the Priorvej Chapel. This chapel was built by LDS members in 1931 and was dedicated by John A. Widtsoe, a member of the Quorum of the Twelve Apostles. It was built in the Neo-classical style, with columns in the front. Most of the renovation of the building was done on the inside. The Church wanted the structure to keep its original exterior appearance.

The day the chapel was dedicated, June 14, was the eighty-first anniversary of the day that the first Mormon missionaries arrived in Denmark. During World War II the chapel was used as a bomb shelter, but the building survived the war with little damage. After World War II the chapel was remodeled to hold more classrooms for the growing membership.

The Copenhagen Denmark Temple has a total of 25,000 sq ft (2,300 m2), two ordinance rooms, and two sealing rooms.

The Manhattan New York Temple (119) was adapted from an existing stake center building—which stands at the intersection of West 65th Street, Broadway, and Columbus Avenue, and is across the street from the Lincoln Center—into the temple. The original building was dedicated by Spencer W. Kimball in May 1975 and houses a public affairs office on the second floor and a chapel on the third floor.

The temple occupies parts of the first floor and all of the fourth, fifth, and sixth floors of the building. The interiors of these floors were completely renovated. The walls were soundproofed so traffic noise would not interrupt temple patrons. The total floor area for the temple part of the building is 20,630 sq ft (1,917 m2), with two progressive ordinance rooms and two sealing rooms. Unlike many of the smaller temples built since the pilot program, the ordinance rooms are perpendicular to each other to adapt to the size limitations of the building. The cornerstone containing the year of dedication, commonly found on the outside facade of most temples, is located in the interior lobby next to the elevator which leads to the chapel portion of the building. Inside the temple, beehives are carved into the molding, and door handles that look like the Statue of Liberty torch are found throughout. Paintings on the walls of many of the rooms depict scenes from nature.

After the dedication, a special ceremony was held and a time capsule was placed in the cornerstone. Memorabilia such as a copy of the New York Times and LDS Church memorabilia such as a set of scriptures, a handkerchief used during the dedication ceremony, and sheet music, were placed inside. A steeple and statue of the angel Moroni would be added to the building in the fall. On October 9, 2004, thousands of people came to watch the ten-foot statue be placed on top of the steeple.

In a local church conference on November 12, 2006, it was officially announced that the fourth floor, which formerly housed classrooms and offices associated with the third-floor chapel and the old stake center, would be converted to become part of the temple. This construction was completed during the maintenance closing in August 2007. The temple baptistery continues to occupy part of the first floor of the building, and the rest of the temple occupies all of the fourth, fifth, and sixth floors. The third floor is a chapel for local congregations, and the second floor houses a public affairs office and a Family History Center. Clothing rental facilities are located on the fourth floor. The Family History Center that was located in the building prior to the construction of the temple was one of the most-used centers in the world.

On October 1, 2011, it was announced at the church's general conference that the Provo Tabernacle would be converted into Provo's second temple.

Neo-Classical temples

During a 2011 devotional at Brigham Young University - Idaho, Thomas E. Coburn, managing director of the LDS Church temple department, explained that church president Thomas S. Monson and the church's temple department were beginning to construct temples according to the "timeless" and classical designs of the cultures and people they will serve, citing the recently revealed architectural rendering of the Philadelphia Pennsylvania Temple as the first of many examples. This trend towards Neo-Classicism appears to be the latest in LDS Temple architecture.[21] The Indianapolis Indiana Temple, with a central spire design reminiscent of downtown structures like the Indianapolis Soldiers' and Sailors' Monument or the Indiana World War Memorial Plaza, is another example.

See also

References

Further reading

Media related to Temples of The Church of Jesus Christ of Latter-day Saints at Wikimedia Commons

This article is issued from Wikipedia - version of the 5/30/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.