A signal generator is an electronic device that generates repeating or non-repeating electronic signals in either the analog or the digital domain. It is generally used in designing, testing, troubleshooting, and repairing electronic or electroacoustic devices, though it often has artistic uses as well.
There are many different types of signal generators with different purposes and applications and at varying levels of expense. These types include function generators, RF and microwave signal generators, pitch generators, arbitrary waveform generators, digital pattern generators and frequency generators. In general, no device is suitable for all possible applications.
Traditionally, signal generators have been embedded hardware units, but since the age of multimedia PCs, flexible, programmable software tone generators have also been available.
General purpose signal generators
A function generator is a device which produces simple repetitive waveforms. Such devices contain an electronic oscillator, a circuit that is capable of creating a repetitive waveform. (Modern devices may use digital signal processing to synthesize waveforms, followed by a digital to analog converter, or DAC, to produce an analog output). The most common waveform is a sine wave, but sawtooth, step (pulse), square, and triangular waveform oscillators are commonly available as are arbitrary waveform generators (AWGs). If the oscillator operates above the audio frequency range (>20 kHz), the generator will often include some sort of modulation function such as amplitude modulation (AM), frequency modulation (FM), or phase modulation (PM) as well as a second oscillator that provides an audio frequency modulation waveform.
Arbitrary waveform generator
An arbitrary waveform generators (AWG or ARB) is a sophisticated signal generators that generates arbitrary waveforms within published limits of frequency range, accuracy, and output level. Unlike a function generator that produces a small set of specific waveforms, an AWG allows the user to specify a source waveform in a variety of different ways. An AWG is generally more expensive than a function generator and often has less bandwidth. An AWG is used in higher-end design and test applications.
Technical trends driving the ARB industry
New high-speed DACs provide up to 16-bit resolution at sample rates in excess of 1 GS/s. These devices provide the foundation for an AWG with the bandwidth and dynamic range to address modern radio and communication applications. In combination with a quadrature modulator and advanced digital signal processing, high-speed DACs can be applied to create a full-featured vector signal generator with very high modulation bandwidth. Example applications include commercial wireless standards such as Wi-Fi (IEEE 802.11), WiMAX (IEEE 802.16) and LTE, in addition to military standards such as those specified in the Joint Tactical Radio System (JTRS) initiative. Also, broad modulation bandwidth allows multi-carrier signal generation, necessary for testing receiver adjacent channel rejection.
RF and microwave signal generators
RF (radio frequency) and microwave signal generators are used for testing components, receivers and test systems in a wide variety of applications including cellular communications, WiFi, WiMAX, GPS, audio and video broadcasting, satellite communications, radar and electronic warfare. RF and microwave signal generators normally have similar features and capabilities, but are differentiated by frequency range. RF signal generators typically range from a few kHz to 6 GHz, while microwave signal generators cover a much wider frequency range, from less than 1 MHz to at least 20 GHz. Some models go as high as 70 GHz with a direct coaxial output, and up to hundreds of GHz when used with external waveguide source modules. RF and microwave signal generators can be classified further as analog or vector signal generators.
Analog signal generators
Analog signal generators based on a sine-wave oscillator were common before the inception of digital electronics, and are still used. There was a sharp distinction in purpose and design of radio-frequency and audio-frequency signal generators.
RF signal generators are capable of producing CW (continuous wave) tones. The output frequency can usually be tuned anywhere in their frequency range. Many models offer various types of analog modulation, either as standard equipment or as an optional capability to the base unit. This could include AM, FM, ΦM (phase modulation) and pulse modulation. Another common feature is a built-in attenuator which makes it possible to vary the signal’s output power. Depending on the manufacturer and model, output powers can range from -135 to +30 dBm. A wide range of output power is desirable, since different applications require different amounts of signal power. For example, if a signal has to travel through a very long cable out to an antenna, a high output signal may be needed to overcome the losses through the cable and still have sufficient power at the antenna. But when testing receiver sensitivity, a low signal level is required to see how the receiver behaves under low signal-to-noise conditions.
RF signal generators are available as benchtop instruments, rackmount instruments, embeddable modules and in card-level formats. Mobile, field-testing and airborne applications benefit from lighter, battery-operated platforms. In automated and production testing, web-browser access, which allows multi-source control, and faster frequency switching speeds improve test times and throughput.
RF signal generators are required for servicing and setting up analog radio receivers, and are used for professional RF applications.
Audio-frequency signal generators generate signals in the audio-frequency range and above. An early example was the HP200A Audio Oscillator, the first product sold by the Hewlett-Packard Company in 1939. Applications include checking frequency response of audio equipment, and many uses in the electronic laboratory.
Equipment distortion can be measured using a very-low-distortion audio generator as the signal source, with appropriate equipment to measure output distortion harmonic-by-harmonic with a wave analyser, or simply total harmonic distortion. A distortion of 0.0001% can be achieved by an audio signal generator with a relatively simple circuit.
Vector signal generator
With the advent of digital communications systems, it is no longer possible to adequately test these systems with traditional analog signal generators. This has led to the development of the vector signal generator, which is also known as a digital signal generator. These signal generators are capable of generating digitally-modulated radio signals that may use any of a large number of digital modulation formats such as QAM, QPSK, FSK, BPSK, and OFDM. In addition, since modern commercial digital communication systems are almost all based on well-defined industry standards, many vector signal generators can generate signals based on these standards. Examples include GSM, W-CDMA (UMTS), CDMA2000, LTE, Wi-Fi (IEEE 802.11), and WiMAX (IEEE 802.16). In contrast, military communication systems such as JTRS, which place a great deal of importance on robustness and information security, typically use very proprietary methods. To test these types of communication systems, users will often create their own custom waveforms and download them into the vector signal generator to create the desired test signal.
Digital pattern generator
A logic signal generator or data pattern generator or digital pattern generator produces logic signals - that is logical 1s and 0s in the form of conventional voltage levels. The usual voltage standards are: LVTTL, LVCMOS. It is different from a 'pulse/pattern generator', which refers to signal generators able to generate logic pulses with different analog characteristics (such as pulse rise/fall time, high level length, ...).
A digital pattern generator is used as stimulus source for digital integrated circuits and embedded systems - for functional validation and testing.
Special purpose signal generators
In addition to the above general-purpose devices, there are several classes of signal generators designed for specific applications.
Pitch generators and audio generators
A pitch generator is a type of signal generator optimized for use in audio and acoustics applications. Pitch generators typically include sine waves over the audio frequency range (20 Hz–20 kHz). Sophisticated pitch generators will also include sweep generators (a function which varies the output frequency over a range, in order to make frequency-domain measurements), multipitch generators (which output several pitches simultaneously, and are used to check for intermodulation distortion and other non-linear effects), and tone bursts (used to measure response to transients). Pitch generators are typically used in conjunction with sound level meters, when measuring the acoustics of a room or a sound reproduction system, and/or with oscilloscopes or specialized audio analyzers.
Many pitch generators operate in the digital domain, producing output in various digital audio formats such as AES3, or SPDIF. Such generators may include special signals to stimulate various digital effects and problems, such as clipping, jitter, bit errors; they also often provide ways to manipulate the metadata associated with digital audio formats.
The term synthesizer is used for a device that generates audio signals for music, or that uses slightly more intricate methods.
Computer programs can be used to generate arbitrary waveforms on a general-purpose computer and output the waveform via an output interface. Such programs may be provided commercially or be freeware. Simple systems use a standard computer sound card as output device, limiting the accuracy of the output waveform and limiting frequency to lie within the audio-frequency band.
Video signal generator
A video signal generator is a device which outputs predetermined video and/or television waveforms, and other signals used to stimulate faults in, or aid in parametric measurements of, television and video systems. There are several different types of video signal generators in widespread use. Regardless of the specific type, the output of a video generator will generally contain synchronization signals appropriate for television, including horizontal and vertical sync pulses (in analog) or sync words (in digital). Generators of composite video signals (such as NTSC and PAL) will also include a colorburst signal as part of the output. Video signal generators are available for a wide variety of applications, and for a wide variety of digital formats; many of these also include audio generation capability (as the audio track is an important part of any video or television program or motion picture).
- A/N URM-25D Signal Generator, 1950s hardware still in use today.
- Digital Pattern Generator, for generating digital (logic) type of signals
- Capacitor Sounds 1 - Low Distortion (sub 1PPM ) 1 kHz Test Oscillator, C Bateman, Electronics World July 2002, expanded March 2003. Description, measurements, circuit, and PCB layout
|Wikimedia Commons has media related to Signal generators.|
- Function Generator & Arbitrary Waveform Generator Guidebook
- Understanding signal generator specifications
- Waveform Generator Fundamentals
- Blog Post: All About ABRS (Waveform Generators)