Seismic vibrator

Seismic vibrators during a 3D exploration in Austrian alpine foothills
World largest seismic vibrator Nomad 90 during a vibration
Principle of operation of a seismic vibrator shaker

A seismic vibrator is a truck-mounted or buggy-mounted device that is capable of injecting low-frequency vibrations into the earth. It is one of a number of seismic sources used in reflection seismology.[1] The ‘Vibroseis’ exploration technique (performed with vibrators) was developed by the Continental Oil Company (Conoco) during the 1950s and was a trademark until the company's patent lapsed.[2]

Today, seismic vibrators are used to perform about half of all seismic surveys on land.[3]

The largest seismic vibration truck in the world, known as 'Nomad 90’, weighs 41.5T and has a 90,000 lbf force.

The plot of Ken Follett's 1998 thriller The Hammer of Eden turns on the use of a stolen seismic vibrator truck by ecoterrorists.

Principle

A seismic vibrator transforms the energy provided by a diesel engine into a vibration. It is performed by a shaker, a movable element that generates the vibration thanks to a piston-reaction mass device driven by an electrohydraulic servo valve. The shaker is applied to the ground for each vibration, then raised up so that the seismic vibrator can move to another vibrating point.[4]

Vibrator capability is defined by the maximum force it is capable to generate, called High Peak Force and measured in pound-force. To transmit a maximum force to the ground and prevent the shaker from bumping, part of the weight of the vibrator is applied to the shaker.

Wikimedia Commons has media related to Thumper trucks.

Notes and references

  1. Robert E. Sheriff, Encyclopedic Dictionary of Applied Geophysics (Geophysical References No. 13) 4th Edition, 2002, 429 pag. ISBN 978-1560801184.
  2. Anstey, Nigel A., Vibroseis, Prentice Hall, 1991.
  3. "The Vibroseis Source, by Guido Baeten and A. Ziolkowski". Amazon. 1990. Retrieved 2008-07-08. quoted from Amazon's book description.
  4. Li d th R O Lindseth, Roy O., Di it l P i f G h i l D t Digital Processing of Geophysical Data — A Review, originally published 1968, SEG Course Notes, 1982, 282 pages, Catalog #251A


This article is issued from Wikipedia - version of the 11/16/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.