Scania 3-series (bus)

Scania 3-series

Carrus Fifty bodied Scania K113TLB in Sweden.
Overview
Manufacturer Scania
Production 1988-1999
Assembly
Powertrain
Engine
  • 8.5 L DS9/DSC9 I6 (diesel)
  • 11.0 L DS11/DSC11 I6 (diesel)
Chronology
Predecessor Scania 2-series
Successor Scania 4-series

The Scania 3-series bus range was introduced by Scania in 1988 and was superseded by the 4-series bus range in 1997.[1]

Model designations

The model designation breakdown is as follows:

Main type
Engine series
Development code
Chassis type
Steering wheel location
Axle/suspension configuration

So K113TLA would be a left-hand drive tri-axle coach with independent front suspension, while L113CRL would be a right-hand drive two-axle citybus.

Scania F93/F113

The F93 and F113 chassis had the engine mounted in front of the front axle. These models were not sold in Europe.

Scania K93/K113

Murrays Autral Pacific bodied Scania K113TRBL 14.5-metre quad-axle coach in Canberra, Australia

The K93 and K113 were the most common chassis for coaches, with a longitudinally rear-mounted engine.

It was even available as the rare quad-axle K113TRBL in Australia.

Scania L113

Main article: Scania L113

Scania N113

Main article: Scania N113

Scania S113

The S113 chassis had the engine mounted above the front axle. It was not sold in Europe. The S113 was discontinued in 1993.

References


This article is issued from Wikipedia - version of the 10/30/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.