SR L1 class

SR L1 class

757, circa 1928
Type and origin
Power type Steam
Designer Richard Maunsell (development of SECR L class by Harry Wainwright)
Builder North British Locomotive Company
Serial number 23356–23370
Build date 1926
Total produced 15
Specifications
Configuration 4-4-0
UIC class 2′B h2
Gauge 4 ft 8 12 in (1,435 mm) standard gauge
Leading dia. 3 ft 7 in (1.092 m)
Driver dia. 6 ft 8 in (2.032 m)
Length 56 ft 7 58 in (17.26 m)
Loco weight 57 long tons 16 cwt (129,500 lb or 58.7 t) (64.7 short tons)
Fuel type Coal
Firebox:
  Firegrate area
22 12 sq ft (2.09 m2)
Boiler pressure 180 lbf/in2 (1.24 MPa)
Heating surface 1,407 sq ft (130.7 m2)
  Tubes 914 sq ft (84.9 m2)
  Flues 338 12 sq ft (31.45 m2)
  Firebox 154 12 sq ft (14.35 m2)
Superheater:
  Heating area 235 sq ft (21.8 m2)
Cylinders Two, inside
Cylinder size 19 12 in × 26 in (495 mm × 660 mm)
Performance figures
Tractive effort 18,910 lbf (84,100 N)
Career
Operators
Class SR: L1
Power class BR: 3P
Numbers
  • SR: A753–A759, A782–A879
  • → 1753–1759, 1782–1789
  • BR: 31753–31759, 31782–31789
Withdrawn 1959–1962
Disposition All scrapped

The Southern Railway L1 class was a class of 4-4-0 steam tender locomotives built for express passenger service on the South Eastern Main Line of the Southern Railway (Great Britain). They were designed by Richard Maunsell as a development of Harry Wainwright's L class.

Background

Harry Wainwright had built two useful and attractive 4-4-0 classes for the South Eastern and Chatham Railway between 1902 and 1908; the D class and the E class, and had completed designs for a larger L class at the time of his retirement at the end of 1913. However, by 1918 they were beginning to struggle with the heaviest express trains. Wainwright's successor, Richard Maunsell, therefore rebuilt several examples of the D and E classes immediately before the grouping of the SECR with other railways to form the Southern Railway in 1923.

When Maunsell was appointed as Chief Mechanical Engineer of the new railway he turned his attention to designing new K & K1 class 2-6-4 tank engines. However, in 1926 there was an urgent requirement for fifteen more powerful 4-4-0 locomotives for the London to Folkestone express trains. Maunsell did not rebuild the L class as the locomotives were still relatively new and useful in their present form. He rather amended Wainwright's drawings to form his own L1 class, and supplied them to the North British Locomotive Company. The weight of the new class was increased to 57 tons 16 cwt. The boiler pressure was increased from 160 to 180 lbs per square inch but the cylinders reduced in diameter from 20 12 to 19 12 inches (521 to 495 mm). The engines also had long-travel piston valves, Maunsell’s own design of superheater and side-window cab and other detail alterations.[1]

Numbering

The locomotives were originally numbered A753–A759, and A782–A789, but were later renumbered by the Southern Railway as 1753–1759 and 1782–1789. All passed to British Railways (BR) in 1948 and were again renumbered between 31753 and 31789.

Operational details

The locomotives were used on express trains on the South Eastern main lines from London to Dover, Ramsgate, and Hastings. They remained on these duties until the mid-1930s when they were gradually replaced on the heavier trains by the newer ”King Arthur” and ”Schools” classes. They continued to be used on the former London Chatham and Dover Railway main line to Dover and Ramsgate until after the Second World War and the nationalisation of British Railways in 1948. The transfer of Bulleid “Light Pacifics” to these services in the early 1950s made the class largely redundant. Some were briefly transferred to Eastleigh and to replace worn out locomotives on cross-country services, but most spent their careers between London and the Kent coast. Withdrawal began in 1959. The final locomotive was withdrawn in February 1962. None remain.

31782 at Redhill 1955

References

  1. Bradley 1980, pp. 122–127.
This article is issued from Wikipedia - version of the 11/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.