Rumpler C.III

C.III and C.V
Role Reconnaissance aircraft
National origin Germany
Manufacturer Rumpler
First flight 1916




The Rumpler C.III (factory designation 6A5) was a biplane military reconnaissance aircraft built in Germany during World War I.[1]

Development

Rumpler C.III

It was a development of the Rumpler C.I design incorporating many aerodynamic refinements, including wing planform, airfoil section, and horn-balanced ailerons,[2] revised empennage,[2] and new rear fuselage decking with compound curves.[3] This latter feature was later removed and replaced with a simplified structure, at which point the factory designation was changed to 6A6.[3] Performance was improved over that of the C.I,[1] and the C.III was selected for limited production, thought to be about 75 aircraft. The Frontbestand table of C-type aircraft at the front shows a maximum of 42 C.III aircraft at the front on 28 February 1917. With the introduction of the more powerful Rumpler C.IV based on a refined C.III airframe, the number of operational C.III aircraft at the front dropped rapidly and by the autumn of 1917 only one was at the front. The C.III was a qualified success, but its design served mainly as a stepping stone to the further refined C.IV.[2]

Specifications (C.III)

Data from Kroschel & Stützer 1994, p.127

General characteristics

Performance

Armament


Notes

  1. 1 2 Taylor 1989, p.771
  2. 1 2 3 The Illustrated Encyclopedia of Aircraft, p.2833
  3. 1 2 Gray & Thetford 1962, p.522

References

Wikimedia Commons has media related to Rumpler C.III.
This article is issued from Wikipedia - version of the 4/14/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.