Renault R26

Renault R26
Category Formula One
Constructor Renault
Designer(s) Bob Bell
Predecessor R25
Successor R27
Technical specifications
Chassis Carbon fibre and honeycomb composite structure
Suspension (front) Double wishbone/pushrod operating torsion bar
Suspension (rear) Double wishbone/pushrod operating torsion bar
Engine Renault RS26, Mid-mounted 2.4 litre V8 (90°)
Transmission Titanium longitudinal, 7 speed + 1 reverse
Fuel Elf
Tyres Michelin
Competition history
Notable entrants Mild Seven Renault F1 Team
Notable drivers 1. Spain Fernando Alonso
2. Italy Giancarlo Fisichella
Debut 2006 Bahrain Grand Prix
RacesWinsPolesF.Laps
18875
Constructors' Championships 1 (2006)
Drivers' Championships 1 (Alonso, 2006)

The Renault R26 is a Formula One racing car, used by the Renault F1 team in the 2006 Formula One season. The car was driven by Fernando Alonso and Giancarlo Fisichella. Over the course of the season it scored 8 wins out of 18 races, and was the most complete package in most of the year, followed closely by the rival Ferrari 248 F1. The R26 helped Renault in claiming the Constructors' Championship with a 5-point advantage over rival Ferrari, and also taking Fernando Alonso to his second Drivers' Championship in succession, 13 points ahead of rival Michael Schumacher. It brought the last Constructors' Championship in recent history to tyre manufacturer Michelin.

Like its rival the Ferrari 248 F1, the R26 was notable for its rock-solid reliability, chassis R26-03 driven by Fernando Alonso started all of the races of the 2006 season without the need to be replaced (F1 drivers usually go through multiple chassis in a season), it also led more laps and won more races than any single chassis in 2006 in addition to winning the world championship.[1] R26-03 now sits at Renault’s “Histoire et Collection” heritage collection in Paris.

The R26 was succeeded by the R27 for the 2007 season.

Mass Damper

A tuned mass damper, also known as a harmonic absorber, is a device that is attached to structures in order to reduce the strength of vibrations passing through them.[2] Tuned mass dampers are used in buildings across the world to reduce the effects of earthquakes and strong gusts of wind.[3] In the Renault R26, this technology was used for a more benign purpose. It was used to keep the front of car stable over kerbs and through slow and fast corners. Keeping the front of the car stable is crucial to the aerodynamic efficiency of the car because changes in ride height - caused by bumps on the road or changes in downforce levels due to speed - can alter the way that air passes over the front wing of the car and therefore the rest of the car's aerodynamic efficiency also suffers.[4] The Tuned mass damper in the Renault R26 was invented by Renault engineer Rob Marshall. The mass damper itself was a cylinder, standing upright, with the mechanical components inside. Inside the cylinder sat a 9 kilogram disc which rested in between two springs. The disc was free to move on the Y-axis with its only hindrance, the springs that it was attached to and the damper fluid within the cylinder. The whole assembly was attached to the chassis inside the nosecone of the car. The device was then 'tuned' to the needs of each track by either changing the clearance between the disc and the cylinder bore or by adjusting the size of two-way valve within the disc itself. The Tuned mass damper on the Renault R26 vibrated in the opposite direction from the chassis due to inertia, with its magnitude calculated by the 'tuning' variables mentioned above. This counteracting force stabilized the front end of the car over kerbs and through slow and fast corners.[5]

Renault first introduced the technology in its 2005 challenger, Renault R25. The technology was raced in the last few races of the 2005 season and had been deemed to be legal by the stewards. During the first half of the 2006 season, Renault had built up a comfortable points lead over their main rivals Ferrari. However, at the time of the German Grand Prix at the Hockenheimring the FIA decided to ban all the teams from using Tuned mass dampers in their car. Even though the system was deemed legal for over half a year, the FIA decided that it broke the rule that no moving part can influence the aerodynamics of the car. Renault claimed that the loss of the system cost them 0.3 seconds a lap. The ban hurt the Renault team more than their competitors because Renault had designed their whole car around the technology, meanwhile, their competitors had just included the technology as an after-thought after seeing Renault's implementation. This was clearly visible because Ferrari won 5 of the 7 remaining races in the season. However, the French team managed to defend both championship titles successfully.[6]

References

  1. ↑ "The remarkable history of the chassis R26-03 - F1technical.net".
  2. ↑ http://www.csaengineering.com/products-services/tuned-mass-dampers-absorbers/[]
  3. ↑ "Tuned Mass Damper of Taipei 101".
  4. ↑ "Renault R26 - mass damper system". formula1.com. 28 July 2006. Archived from the original on 7 April 2014.
  5. ↑ SEAS. "Mass Damper".
  6. ↑ "Banned! Tuned mass dampers · F1 Fanatic". 31 May 2007.

Complete Formula One results

(key) (results in bold indicate pole position)

Year Team Engine Tyres Drivers 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Points WCC
2006 Renault Renault RS26 V8 M BHR MAL AUS SMR EUR ESP MON GBR CAN USA FRA GER HUN TUR ITA CHN JPN BRA 206 1st
Fernando Alonso 1 2 1 2 2 1 1 1 1 5 2 5 Ret 2 Ret 2 1 2
Giancarlo Fisichella Ret 1 5 8 6 3 6 4 4 3 6 6 Ret 6 4 3 3 6
Wikimedia Commons has media related to Renault R26.
Awards
Preceded by
McLaren MP4-20		 Autosport
Racing Car Of The Year
2006 		Succeeded by
McLaren MP4-22
This article is issued from Wikipedia - version of the 7/2/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.