Ramganga Dam

Ramganga Dam
Location of Ramganga Dam in India
Country India
Location Kalagrh
Coordinates 29°31′10″N 78°45′31″E / 29.51944°N 78.75861°E / 29.51944; 78.75861Coordinates: 29°31′10″N 78°45′31″E / 29.51944°N 78.75861°E / 29.51944; 78.75861
Status Operational
Construction began 1961
Opening date 1974
Construction cost Rs. 172.12 crores
Owner(s) Uttaranchal Jal Vidyut Nigam Limited
Dam and spillways
Type of dam Embankment
Impounds Ramganga River
Height 128 m (420 ft)
Length 715 m (2,346 ft)
Dam volume 10,000,000 m3 (13,079,506 cu yd)
Spillway capacity 8,467 m3/s (299,009 cu ft/s)
Reservoir
Total capacity 2,447,000,000 m3 (1,983,815 acre·ft)
Active capacity 2,190,000,000 m3 (1,775,462 acre·ft)
Catchment area 3,134 km2 (1,210 sq mi)
Surface area 55 km2 (21 sq mi)
Power station
Decommission date 1975-1977
Hydraulic head 84.4 m (277 ft) (design)
Turbines 3 x 66 MW Francis-type
Installed capacity 198 MW

The Ramganga Dam, also known as the Kalagarh Dam, is an embankment dam on the Ramganga River 3 km (2 mi) upstream of Kalagarh in Pauri Garhwal district, Uttarakhand, India. It is located within the Jim Corbett National Park.

Background

The dam is part of the Ramganga Multipurpose Project — an irrigation and hydroelectric project. It supports a 198 MW power station and provides water for the irrigation of 57,500 ha (142,086 acres) of farmland. In addition, it provides for flood control and recreation. Construction on the dam began in 1961 and it was completed in 1974. The three generators in the power station were commissioned in December 1975, November 1976 and March 1977.[1]

Design

The dam is a 128 m (420 ft) tall and 715 m (2,346 ft) long earth and rock-fill embankment dam with 10,000,000 m3 (13,079,506 cu yd) of fill. The dam's spillway is controlled by five gates and has a maximum discharge of 8,467 m3/s (299,009 cu ft/s). To support the reservoir's elevation, there is a 72 m (236 ft) tall saddle dam on the reservoir's rim 2.5 km (2 mi) to the northeast on the Chui Sot River. The reservoir created by both dams has a 2,447,000,000 m3 (1,983,815 acre·ft) capacity of which 2,190,000,000 m3 (1,775,462 acre·ft) is active (or "useful") capacity. The reservoir has a surface of 55 km2 (21 sq mi) and a catchment area of 3,134 km2 (1,210 sq mi).[2][3] The power station at the toe of the dam contains three 66 MW Francis turbine-generators and is afforded 84.4 m (277 ft) of design hydraulic head.[4] Below the dam is a system of over 6,300 km (3,915 mi) of canals supported by three barrages and 82 km (51 mi) of main feeder canal.[1]

See also

References

  1. 1 2 Prasad, Kamta; Goel, R.S.; Goel, R.S. (2000). Environmental management in hydro electric projects proceedings of the national seminar held at India International Centre, New Delhi, on November 11 and 12, 1999. New Delhi: Concept Pub. Co. p. 155. ISBN 81-7022-870-0. Cite uses deprecated parameter |coauthors= (help)
  2. Jain, Sharad K.; Agarwal, Pushpendra K., Singh, Vijay P. (2007). Hydrology and water resources of India. Dordrecht: Springer. pp. 382–383. ISBN 1-4020-5179-4. Cite uses deprecated parameter |coauthors= (help)
  3. "India: National Register of Large Dams 2009" (PDF). Central Water Commission. Retrieved 10 July 2011.
  4. "Ramganga Power Plant (3X66 =198 MW)". Uttaranchal Jal Vidyut Nigam Limited. Retrieved 11 July 2011.
This article is issued from Wikipedia - version of the 9/25/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.