PKP class EP08

PKP class EP08

EP08-11 on 9 February 2006 waiting next turn of duty at Krakow Plaszow
Type and origin
Power type Electric
Builder Pafawag
Build date 19721976
Total produced 15
Specifications
UIC class Bo′Bo′
Gauge 1,435 mm (4 ft 8 12 in) standard gauge
Wheel diameter 1,250 mm (49.21 in)
Length 15,915 mm (52 ft 2 58 in)
Width 3,038 mm (9 ft 11 58 in)
Height 4,343 mm (14 ft 3 in)
Loco weight 80 tonnes (79 long tons; 88 short tons)
Electric system(s) 3000 V DC Catenary
Current collection Pantograph
Traction motors 4 x EE541g, 77:24 gear ratio
Loco brake Oerlikon Contraves
Safety systems SHP
Performance figures
Maximum speed 140 km/h (87 mph)
Power output 2,000 kW (2,680 hp)
Career
Operators PKP
Nicknames Świnia (the Pig)
Delivered 1973

PKP class EP08 is the name for a Polish electric locomotive used by the Polish railway operator Polskie Koleje Państwowe (PKP), produced between 1972 and 1976 in Pafawag, Wrocław. The construction is based on the EU07 locomotive.[1]

History

In the 1970s PKP intended to increase speed of Polish passenger trains, which resulted mainly in building CMK line (Trunk Line) and the modernisation of EU05 locomotives into EP05 series. Meanwhile a project was opened to introduce new electric locomotives able to pull trains with speed exceeding 125 km/h (78 mph), based on British EU06 and local EU07 machines.

In 1972 the first prototype left Pafawag works and until 1976 a total number of 15 units had been produced. Further production was ceased due to huge orders of freight locomotives and insufficient funds for importing foreign parts for the machine.

EP08 were the first locomotives in Poland to exceed the top speed limit of 125 km/h (78 mph) and contributed (alongside the EP05 class) into fast development of high speed passenger connections. All machines of this class station in Warsaw but as top speed on Warsaw-Poznań line had been increased to 160 km/h (99 mph) they are no longer used on regular basis and serve as auxiliary machines, mostly pulling trains from Warsaw to Zakopane.[2]

Technical data

As the EP08 is tightly based on EU06 and EU07 locomotives it is important to compare those series while writing about technical features. EP08 is a Bo-Bo locomotive with four axles mounted on two bogies. Each axle is propelled separately by an EE541a traction motor. The cab has two identical crew compartments on both ends.

The main differences between EP08 and previous EU07 locomotives are as follows. Transmission was changed from 79:18 into 77:24 what resulted in possible top speed of 160 km/h (99 mph). However, the machined performed poorely driving with such speed, so the top speed was set to 140 km/h (87 mph). First five units were equipped with plain bearings what proved insufficient for higher speeds and as a result all these locomotives were rebuilt as EU07 series (numbers 241 to 244). In later units roller bearing's were used.

Another significant change comparing to EU07 series was exchange of traction motors to newer EE541g type with higher isolation class. Windscreens were changed to 14 mm (0.551 in) thick ones with heating layer and pneumatic wipers. However, some solutions from EU07 locomotives which were rather faulty, were copied into this machines, like poor access to internal devices.[2]

EU08 is suited for multiple steering work. Locomotive's cab resembles those of EU06 and EU07, but have different, orange and brown painting. Since June 2007 PKP Intercity has started repainting those machines into new, blue and white colours.[3]

Nicknames

References

  1. Artur Garbacz. "Elektrowóz EP08". Retrieved 2007-08-04.
  2. 1 2 Michał Wojtaszek. "Prywatna strona miłośnika komunikacji miejskiej i szynowej". Retrieved 2007-08-04.
  3. "Lokomotywownia Szwederowo". Archived from the original on October 11, 2007. Retrieved 2007-08-06.
This article is issued from Wikipedia - version of the 9/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.