Nernst equation

In electrochemistry, the Nernst equation is an equation that relates the reduction potential of an electrochemical reaction (half-cell or full cell reaction) to the standard electrode potential, temperature, and activities (often approximated by concentrations) of the chemical species undergoing reduction and oxidation. It is the most important equation in the field of electrochemistry. It is named after the German physical chemist who first formulated it, Walther Nernst.[1][2]


The Nernst equation is easily derived from the standard changes in Gibbs free energy associated with an electrochemical transformation. For any electrochemical reduction reaction of the form , standard thermodynamics says that the actual free energy change is related to the free energy change under standard conditions by the relationship , where Q is the reaction quotient. The electrochemical potential E associated with an electrochemical reaction of the form is defined as the change in Gibbs free energy per Coulomb of charge transferred, which leads to the relationship . The constant F (the Faraday constant) is a units conversion factor where NA is Avogadro's number and q is the fundamental electron charge. This immediately leads to the Nernst Equation.

The Nernst equation for an electrochemical half-cell is:

For a complete electrochemical reaction (full cell), the equation can also be written as:
   (total cell potential)


At room temperature (25 °C), RT/F may be treated like a constant and replaced by 25.693 mV for cells.

The Nernst equation is frequently expressed in terms of base 10 logarithms (i.e., common logarithms) rather than natural logarithms, in which case it is written, for a cell at 25 °C:

The Nernst equation is used in physiology for finding the electric potential of a cell membrane with respect to one type of ion.

Nernst potential

Main article: Reversal potential

The Nernst equation has a physiological application when used to calculate the potential of an ion of charge z across a membrane. This potential is determined using the concentration of the ion both inside and outside the cell:

When the membrane is in thermodynamic equilibrium (i.e., no net flux of ions), the membrane potential must be equal to the Nernst potential. However, in physiology, due to active ion pumps, the inside and outside of a cell are not in equilibrium. In this case, the resting potential can be determined from the Goldman equation:

The potential across the cell membrane that exactly opposes net diffusion of a particular ion through the membrane is called the Nernst potential for that ion. As seen above, the magnitude of the Nernst potential is determined by the ratio of the concentrations of that specific ion on the two sides of the membrane. The greater this ratio the greater the tendency for the ion to diffuse in one direction, and therefore the greater the Nernst potential required to prevent the diffusion.

A similar expression exists that includes r (the absolute value of the transport ratio). This takes transporters with unequal exchanges into account. See: sodium-potassium pump where the transport ratio would be 2/3. The other variables are the same as above. The following example includes two ions: potassium (K+) and sodium (Na+). Chloride is assumed to be in equilibrium.

When chloride (Cl) is taken into account, its part is flipped to account for the negative charge.


Using Boltzmann factors

For simplicity, we will consider a solution of redox-active molecules that undergo a one-electron reversible reaction

Ox + e Red

and that have a standard potential of zero. The chemical potential μc of this solution is the difference between the energy barriers for taking electrons from and for giving electrons to the working electrode that is setting the solution's electrochemical potential.

The ratio of oxidized to reduced molecules, [Ox]/[Red], is equivalent to the probability of being oxidized (giving electrons) over the probability of being reduced (taking electrons), which we can write in terms of the Boltzmann factor for these processes:

Taking the natural logarithm of both sides gives

If μc ≠ 0 at [Ox]/[Red] = 1, we need to add in this additional constant:

Dividing the equation by e to convert from chemical potentials to electrode potentials, and remembering that k/e = R/F,[3] we obtain the Nernst equation for the one-electron process Ox + e → Red:

Using thermodynamics (chemical potential)

Quantities here are given per molecule, not per mole, and so Boltzmann constant k and the electron charge e are used instead of the gas constant R and Faraday's constant F. To convert to the molar quantities given in most chemistry textbooks, it is simply necessary to multiply by Avogadro's number: R = kNA and F = eNA.

The entropy of a molecule is defined as

where Ω is the number of states available to the molecule. The number of states must vary linearly with the volume V of the system (here an idealized system is considered for better understanding, so that activities are posited very close to the true concentrations. Fundamental statistical proof of the mentioned linearity goes beyond the scope of this section, but to see this is true it is simpler to consider usual isothermal process for an ideal gas where the change of entropy ΔS = nR ln(V2/V1) takes place. It follows from the definition of entropy and from the condition of constant temperature and quantity of gas n that the change in the number of states must be proportional to the relative change in volume V2/V1. In this sense there is no difference in statistical properties of ideal gas atoms compared with the dissolved species of a solution with activity coefficients equaling zero: particles freely "hang around" filling the provided volume), which is inversely proportional to the concentration c, so we can also write the entropy as

The change in entropy from some state 1 to another state 2 is therefore

so that the entropy of state 2 is

If state 1 is at standard conditions, in which c1 is unity (e.g., 1 atm or 1 M), it will merely cancel the units of c2. We can, therefore, write the entropy of an arbitrary molecule A as

where S0 is the entropy at standard conditions and [A] denotes the concentration of A.

The change in entropy for a reaction

a A + b B → y Y + z Z

is then given by

We define the ratio in the last term as the reaction quotient:

where the numerator is a product of reaction product activities, aj, each raised to the power of a stoichiometric coefficient, νj, and the denominator is a similar product of reactant activities. All activities refer to a time t. Under certain circumstances (see chemical equilibrium) each activity term such as aνj
may be replaced by a concentration term, [A].

In an electrochemical cell, the cell potential E is the chemical potential available from redox reactions (E = μc/e). E is related to the Gibbs energy change ΔG only by a constant: ΔG = −nFE, where n is the number of electrons transferred and F is the Faraday constant. There is a negative sign because a spontaneous reaction has a negative free energy ΔG and a positive potential E. The Gibbs energy is related to the entropy by G = HTS, where H is the enthalpy and T is the temperature of the system. Using these relations, we can now write the change in Gibbs energy,

and the cell potential,

This is the more general form of the Nernst equation. For the redox reaction Ox + n e → Red,

and we have:

The cell potential at standard conditions E0 is often replaced by the formal potential E0, which includes some small corrections to the logarithm and is the potential that is actually measured in an electrochemical cell.

Relation to equilibrium

At equilibrium, the electrochemical potential E = 0 and therefore the reaction quotient attains the special value known as the equilibrium constant: Q = K. Therefore,

Or at standard temperature,

We have thus related the standard electrode potential and the equilibrium constant of a redox reaction.


In dilute solutions, the Nernst equation can be expressed directly in the terms of concentrations (since activity coefficients are close to unity). But at higher concentrations, the true activities of the ions must be used. This complicates the use of the Nernst equation, since estimation of non-ideal activities of ions generally requires experimental measurements.

The Nernst equation also only applies when there is no net current flow through the electrode. The activity of ions at the electrode surface changes when there is current flow, and there are additional overpotential and resistive loss terms which contribute to the measured potential.

At very low concentrations of the potential-determining ions, the potential predicted by Nernst equation approaches toward ±∞. This is physically meaningless because, under such conditions, the exchange current density becomes very low, and there is no thermodynamic equilibrium necessary for Nernst equation to hold. The electrode is called to be unpoised in such case. Other effects tend to take control of the electrochemical behavior of the system.

Time dependence of the potential

The expression of time dependence has been established by Karaoglanoff.[4][5][6][7]

Significance to related scientific domains

The equation has been involved in the scientific controversy involving cold fusion. The discoverers of cold fusion, Fleischmann and Pons, calculated that a palladium cathode immersed in a heavy water electrolysis cell could achieve up to 1027 atmospheres of pressure on the surface of the cathode, enough pressure to cause spontaneous nuclear fusion. In reality, only 10,000–20,000 atmospheres were achieved. John R. Huizenga claimed their original calculation was affected by a misinterpretation of Nernst equation.[8] He cited a paper about Pd–Zr alloys.[9] The equation permits the extent of reaction between two redox systems to be calculated and can be used, for example, to decide whether a particular reaction will go to completion or not.

At equilibrium the emfs of the two half cells are equal. This enables Kc to be calculated hence the extent of the reaction.

See also


  1. Orna, Mary Virginia; Stock, John (1989). Electrochemistry, past and present. Columbus, Ohio: American Chemical Society. ISBN 0-8412-1572-3. OCLC 19124885.
  2. Wahl (2005). "A Short History of Electrochemistry". Galvanotechtnik. 96 (8): 1820–1828.
  3. R = NAk; see gas constant
    F = eNA; see Faraday constant
  4. Karaoglanoff, Z. (January 1906), "Über Oxydations- und Reduktionsvorgänge bei der Elektrolyse von Eisensaltzlösungen" [On Oxidation and Reduction Processes in the Electrolysis of Iron Salt Solutions], Zeitschrift für Elektrochemie (in German), 12 (1): 5–16, doi:10.1002/bbpc.19060120105
  5. Bard, Allen J.; Inzelt, György; Scholz, Fritz (eds.), "Karaoglanoff equation", Electrochemical Dictionary, Springer, pp. 527528
  6. Zutshi, Kamala (2008), Introduction to Polarography and Allied Techniques, pp. 127–128
  7. The Journal of Physical Chemistry, Volume 10, p 316.
  8. Huizenga, John R. (1993). "Cold Fusion: The Scientific Fiasco of the Century" (2 ed.). Oxford and New York: Oxford University Press: 33, 47. ISBN 0-19-855817-1.
  9. Huot, J. Y. (1989). "Electrolytic Hydrogenation and Amorphization of Pd-Zr Alloys". Journal of The Electrochemical Society. 136 (3): 630. doi:10.1149/1.2096700. ISSN 0013-4651.

External links

This article is issued from Wikipedia - version of the 12/3/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.