Naval artillery

Men of USS Kearsarge cheering after firing a smoothbore Dahlgren gun during the Battle of Cherbourg in 1864.
In the Turret, a vignette depicting naval artillery by the Bureau of Engraving and Printing (c. before 1863).

Naval artillery is artillery mounted on a warship, originally used only for naval warfare, later also for naval gunfire support against targets on land, and for anti-aircraft use. The term generally refers to tube-launched projectile-firing weapons and excludes self-propelled projectiles like torpedoes and rockets, and those simply dropped overboard like depth charges and naval mines.

Origins

The Battle of Arnemuiden saw the first use of artillery on board ships.

The idea of ship-borne artillery dates back to the classical era. Julius Caesar indicates the use of ship-borne catapults against Britons ashore in his Commentarii de Bello Gallico. The dromons of the Byzantine Empire carried catapults and fire-throwers.

From the late Middle Ages onwards, warships began to carry cannon of various calibres. The Battle of Arnemuiden, fought between England and France in 1338 at the start of the Hundred Years' War, was the first recorded European naval battle using artillery. The English ship Christopher was armed with three cannons and one hand gun.[1]

By the 15th century most Mediterranean powers were utilising heavy cannon mounted on the bow or stern of a vessel and designed to bombard fortresses on shore. By mid-century some vessels also carried smaller broadside cannons for bombarding other vessels immediately prior to an attempted boarding. These small guns were anti-personnel weapons and were fired at point blank range to accompany engagement with muskets or bows.[2]

From the 1470s both the Portuguese and Venetian navies were experimenting with cannons as anti-ship weapons. King John II of Portugal is credited for pioneering, while still a prince in 1474, the introduction of a reinforced deck on the old Henry-era caravel to allow the mounting of heavy guns for this purpose.[3] These were initially wrought iron breech-loading weapons known as basilisks, but by the early fifteenth century the navies of the Mediterranean had universally adopted lighter and more accurate muzzleloaders, cast in bronze and capable of firing balls or stones weighing up to 60 lb (27 kg).[2] In 1489 John of Portugal further contributed to the development of naval artillery by establishing the first standardized teams of trained naval gunners (bombardeiros).[3]

Age of Sail

Transition

The cannon shot (c. 1680), by Willem van de Velde the Younger

The 16th century was an era of transition in naval warfare. Since ancient times, war at sea had been fought much like that on land: with melee weapons and bows and arrows, but on floating wooden platforms rather than battlefields. Though the introduction of guns was a significant change, it only slowly changed the dynamics of ship-to-ship combat.[4] As guns became heavier and able to take more powerful gunpowder charges, they needed to be placed lower in the ship, closer to the water line.

Although some 16th-century galleys mounted broadside cannon, they did so at the expense of rowing positions which sacrificed speed and mobility. Most early cannon were still placed in the forecastle and aftercastle of a ship where they might be conveniently pointed in any direction.[5] Early naval artillery was an antipersonnel weapon to deter boarders, because cannon powerful enough to damage ships were heavy enough to destabilize any ship mounting them in an elevated castle.[6]

Throughout the century, naval artillery was the single greatest advantage the Portuguese held over their rivals in the Indian Ocean, and the Portuguese crown spared no expense in procuring and producing the best naval guns European technology permitted.[7][8] Being a crown industry, cost considerations did not curb the pursuit of the best quality, best innovations and best training.[9] The crown paid wage premiums and bonuses to lure the best European artisans and gunners (mostly German) to advance the industry in Portugal. Every cutting-edge innovation introduced elsewhere was immediately appropriated into Portuguese naval artillery that includes bronze cannon (Flemish/German), breech-loading swivel-guns (prob. German origin), truck carriages (possibly English), and the idea (originally French, c. 1501[10]) of cutting square gunports (portinhola in Portuguese - also already created and tested in the Portuguese ships since the 1490) in the hull to allow heavy cannon to be mounted below deck.[11]

In this respect, the Portuguese spearheaded the evolution of modern naval warfare, moving away from the medieval warship, a carrier of armed men, aiming for the grapple, towards the modern idea of a floating artillery piece dedicated to resolving battles by gunnery alone.

The anti-ship broadside

Gunports cut in the hull of ships were introduced as early as 1501 in France, and eventually as early as before 1496 in some Mediterranean navies, and in 1490 in Portugal,[12][13] about a decade before the famous Tudor era ship, the Mary Rose, was built.[4] This made broadsides,[14] coordinated volleys from all the guns on one side of a ship, possible for the first time in history, at least in theory.

Ships, such as Mary Rose, carried a mixture of cannon of different types and sizes, many designed for land use, and using incompatible ammunition at different ranges and rates of fire. The Mary Rose, like other ships of the time, was built during a period of rapid development of heavy artillery, and her armament was a mix of old designs and innovations. The heavy armament was a mix of older-type wrought iron and cast bronze guns, which differed considerably in size, range and design. The large iron guns were made up of staves or bars welded into cylinders and then reinforced by shrinking iron hoops and breech loaded, from the back, and equipped with simpler gun-carriages made from hollowed-out elm logs with only one pair of wheels, or without wheels entirely. The bronze guns were cast in one piece and rested on four-wheel carriages which were essentially the same as those used until the 19th century. The breech-loaders were cheaper to produce and both easier and faster to reload, but could take less powerful charges than cast bronze guns. Generally, the bronze guns used cast iron shot and were more suited to penetrate hull sides while the iron guns used stone shot that would shatter on impact and leave large, jagged holes, but both could also fire a variety of ammunition intended to destroy rigging and light structure or injure enemy personnel.[15]

The majority of the guns were small iron guns with short range that could be aimed and fired by a single person. The two most common are the bases, breech-loading swivel guns, most likely placed in the castles, and hailshot pieces, small muzzle-loaders with rectangular bores and fin-like protrusions that were used to support the guns against the railing and allow the ship structure to take the force of the recoil. Though the design is unknown, there were two top pieces in a 1546 inventory (finished after the sinking) which was probably similar to a base, but placed in one or more of the fighting tops.[15]

Two large metal cannons of differing designs, one in front of the other
A cast bronze culverin (front) and a wrought iron port piece (back), modern reproductions of two of the guns that were on board the Mary Rose when she sank, on display at Fort Nelson near Portsmouth

During rebuilding in 1536, Mary Rose had a second tier of carriage-mounted long guns fitted. Records show how the configuration of guns changed as gun-making technology evolved and new classifications were invented. In 1514, the armament consisted mostly of anti-personnel guns like the larger breech-loading iron murderers and the small serpentines, demi-slings and stone guns. Only a handful of guns in the first inventory were powerful enough to hole enemy ships, and most would have been supported by the ship's structure rather than resting on carriages. The inventories of both the Mary Rose and the Tower had changed radically by 1540. There were now the new cast bronze cannons, demi-cannons, culverins and sakers and the wrought iron port pieces (a name that indicated they fired through ports), all of which required carriages, had longer range and were capable of doing serious damage to other ships.[15]

Various types of ammunition could be used for different purposes: plain spherical shot of stone or iron smashed hulls, spiked bar shot and shot linked with chains would tear sails or damage rigging, and canister shot packed with sharp flints produced a devastating shotgun effect. Trials made with replicas of culverins and port pieces showed that they could penetrate wood the same thickness of the Mary Rose's hull planking, indicating a stand-off range of at least 90 m (295 ft). The port pieces proved particularly efficient at smashing large holes in wood when firing stone shot and were a devastating anti-personnel weapon when loaded with flakes or pebbles.[15]

A perrier threw a stone projectile three quarters of a mile (1.2 km), while cannon threw a 32-pound ball a full mile (1.6 km), and a culverin a 17-pound ball a mile and a quarter (2 km). Swivel guns and smaller cannon were often loaded with grapeshot for antipersonnel use at closer ranges, while the larger cannon might be loaded with a single heavy cannonball to cause structural damage.[6]

In Portugal, the development of the heavy galleon removed even the necessity of bringing carrack firepower to bear in most circumstances. One of them became famous in the conquest of Tunis in 1535, and could carry 366 bronze cannons (a possible exaggeration - or possibly not - of the various European chroniclers of the time, that reported this number; or also possibly counting the weapons in reserve). This ship had an exceptional capacity of fire for its time, illustrating the evolution that was operating at the time, and for this reason, it became known as Botafogo, meaning literally fire maker, torcher or spitfire in popular Portuguese.

Maturation

The line of battle was used from the beginning of the 16th century by the Portuguese, especially in the Indian Ocean, and from the 17th century, by the other Europeans in general, beginning with the Dutch and the English, in the English Channel and the North Sea. Pictured, the battle of Öland between an allied Danish-Dutch fleet under Cornelis Tromp and the Swedish navy.

Naval artillery and tactics stayed relatively constant during the period 1571–1862, with large, sail-powered wooden naval warships mounting a great variety of different types and sizes of cannon as their main armament.

By the 1650s, the line of battle had developed as a tactic that could take advantage of the broadside armament. This method became the heart of naval warfare during the Age of Sail, with navies adopting their strategies and tactics in order to get the most broadside-on fire.[16] Cannon were mounted on multiple decks to maximize broadside effectiveness. Numbers and caliber differed somewhat with preferred tactics. France and Spain attempted to immobilize ships by destroying rigging with long-range, accurate fire from their swifter and more maneuverable ships, while England and the Dutch Republic favored rapid fire at close range to shatter a ship's hull and disable its crew.

A typical broadside of a Royal Navy ship of the late 18th century could be fired 2–3 times in approximately 5 minutes, depending on the training of the crew, a well trained one being essential to the simple yet detailed process of preparing to fire. French and Spanish crews typically took twice as long to fire an aimed broadside. An 18th-century ship of the line typically mounted 32-pounder or 36-pounder long guns on a lower deck, and 18- or 24-pounders on an upper deck, with some 12-pounders on the forecastle and quarterdeck.

The British Admiralty did not see fit to provide additional powder to captains to train their crews, generally only allowing 1/3 of the powder loaded onto the ship to be fired in the first six months of a typical voyage, barring hostile action. Instead of live fire practice, most captains exercised their crews by "running" the guns in and out—performing all the steps associated with firing but for the actual discharge. Some wealthy captains—those who had made money capturing prizes or from wealthy families—were known to purchase powder with their own funds to enable their crews to fire real discharges at real targets.

Firing

Firing of an 18-pounder aboard a French ship.

Firing a naval cannon required a great amount of labour and manpower. The propellant was gunpowder, whose bulk had to be kept in a special storage area below deck for safety. Powder boys, typically 10–14 years old, were enlisted to run powder from the armory up to the gun decks of a vessel as required.

A typical firing procedure follows. A wet swab was used to mop out the interior of the barrel, extinguishing any embers from a previous firing which might set off the next charge of gunpowder prematurely. Gunpowder, either loose or in a cloth or parchment cartridge pierced by a metal 'pricker' through the touch hole, was placed in the barrel and followed by a cloth wad (typically made from canvas and old rope), then rammed home with a rammer. Next the shot was rammed in, followed by another wad (to prevent the cannonball from rolling out of the barrel if the muzzle was depressed.) The gun in its carriage was then 'run out'—men heaved on the gun tackles until the front of the gun carriage was hard up against the ship's bulwark, and the barrel protruding out of the gun port. This took the majority of the guncrew manpower as the total weight of a large cannon in its carriage could reach over two tons, and the ship would probably be rolling.

The touch hole in the rear ('breech') of the cannon was primed with finer gunpowder ('priming powder'), or a 'quill' (from a porcupine or such, or the skin-end of a feather) pre-filled with priming powder, then ignited.

36-pounder long gun at the ready. The pointing system and accessories can be seen clearly.

The earlier method of firing a cannon was to apply a linstock—a wooden staff holding a length of smoldering match at the end—to the touch-hole of the gun. This was dangerous and made accurate shooting from a moving ship difficult, as the gun had to be fired from the side, to avoid its recoil, and there was a noticeable delay between the application of the linstock and the gun firing.[17] In 1745, the British began using gunlocks (flintlock mechanisms fitted to cannon).

The gunlock was operated by pulling a cord, or lanyard. The gun-captain could stand behind the gun, safely beyond its range of recoil, and sight along the barrel, firing when the roll of the ship lined the gun up with the enemy and so avoid the chance of the shot hitting the sea or flying high over the enemy's deck.[17] Despite their advantages, gunlocks spread gradually as they could not be retrofitted to older guns. The British adopted them faster than the French, who had still not generally adopted them by the time of the Battle of Trafalgar (1805),[17] placing them at a disadvantage as they were in general use by the Royal Navy at this time. After the introduction of gunlocks, linstocks were retained, but only as a backup means of firing.

The linstock slow match, or the spark from the flintlock, ignited the priming powder, which in turn set off the main charge, which propelled the shot out of the barrel. When the gun discharged, the recoil sent it backwards until it was stopped by the breech rope—a sturdy rope made fast to ring bolts let into the bulwarks, and a turn taken about the gun's cascabel, the knob at the end of the gun barrel.

Artillery and shot

Different types of 16th-century German artillery, including (4) a demi-cannon.

The types of artillery used varied from nation and time period. The more important types included the Demi-cannon, the Culverin and Demi-culverin, and the Carronade. One descriptive characteristic which was commonly used was to define guns by their 'pound' rating: theoretically, the weight of a single solid iron shot fired by that bore of cannon. Common sizes were 42-pounders, 36-pounders, 32-pounders, 24-pounders, 18-pounders, 12-pounders, 9-pounders, 8-pounders, 6-pounders, and various smaller calibres. French ships used standardized guns of 36-pound, 24-pound and 12-pound calibres, augmented by carronades and smaller pieces. In general, larger ships carrying more guns carried larger ones as well.

The muzzle-loading design and weight of the iron placed design constraints on the length and size of naval guns. Muzzle loading required the cannon to be positioned within the hull of the ship for loading. The hull is only so wide, with guns on both sides, and hatchways in the centre of the deck also limit the room available. Weight is always a great concern in ship design as it affects speed, stability, and buoyancy. The desire for longer guns for greater range and accuracy, and greater weight of shot for more destructive power, led to some interesting gun designs.

One unique naval gun was the long nine. It was a proportionately longer-barrelled 9-pounder. Its typical mounting as a bow or stern chaser, where it was not perpendicular to the keel, allowed room to operate this longer weapon. In a chase situation, the gun's greater range came into play. However, the desire to reduce weight in the ends of the ship and the relative fragility of the bow and stern portions of the hull limited this role to a 9-pounder, rather than one which used a 12 or 24 pound shot.

In the reign of Queen Elizabeth advances in manufacturing technology allowed the English Navy Royal to start using matched cannon firing standard ammunition,[18] allowing firing of coordinated broadsides (although that was more of a matter of improved training and discipline than of matched guns).

Examples of canister shot.

Different types of shot were employed for various situations. Standard fare was the round shot—spherical cast-iron shot used for smashing through the enemy's hull, holing his waterline, smashing gun carriages and breaking masts and yards, with a secondary effect of sending thousands of large, vicious, wood splinters flying about to maim and kill anyone standing nearby. Of course, any man incidentally hit directly with a round shot would instantly be killed or lose a limb, at best, although such hits were relatively rare. At very close range, two round shots could also be loaded in one gun and fired at the same time. "Double-shotting", as it was called, lowered the effective range and accuracy of the gun, but could be devastating within pistol shot range (similar tactics were used with grapeshot and canister shot, both on sea and on land). Canister shot consisted of metallic canisters which broke open upon firing, each of which was filled with hundreds of lead musket balls for clearing decks like a giant shotgun blast; it is commonly mistakenly called "grapeshot", both today and in historic accounts (typically those of landsmen). Although canister shot could be used aboard ship, it was more traditionally an army artillery projectile for clearing fields of infantry at close range, and although the idea has been around for a very long time, standard "canister shot", as such, didn't exist until the later years of the muzzle-loading era.

Grapeshot was similar in that it also consisted of multiple (usually 9–12) projectiles that separated upon firing, except that the shot was larger (at least 1 inch in diameter, up to 3 inches or larger for heavier guns), and it either came in bundles held together by lengths of rope wrapped around the balls and wedged between, with wooden bases to act as wadding when rammed down the muzzles, or in canvas sacks wrapped about with rope. The name "grapeshot" comes from the former's apparent resemblance to a bunch of grapes. When fired, the inertial forces would cause the bundle to disintegrate, and the shot would spread out to hit numerous targets. Grapeshot was a naval weapon, and existed for almost as long as naval artillery. The larger size of the grapeshot projectiles was desirable because it was more capable of cutting thick cordage and smashing equipment than the relatively smaller musket balls of a canister shot, although it could rarely penetrate a wooden hull. Although grapeshot won great popular fame as a weapon used against enemy crew on open decks (especially when massed in great numbers, such as for a boarding attempt), it was in fact originally designed and carried primarily for cutting up enemy rigging, the numerous smaller projectiles having a greater chance of hitting a vital rope than a single larger projectile.

A more specialized shot for similar use, Chain-shot consisted of two iron balls joined together with a chain, and was particularly designed for cutting large swaths of rigging—anti-boarding netting and sails. It was far more effective in this use, but its specialized design meant it was of limited utility for any other purpose. Bar shot was similar, except that it used a solid bar to join the two balls; the bar could sometimes also extend upon firing. Series of long chain links were also used in a similar way. Bags of junk, such as scrap metal, bolts, rocks, gravel, or old musket balls, were known as 'langrage', and were fired to injure enemy crews (although this was not common, and when it was used, it was generally aboard non-commissioned vessels such as privateers, actual pirate ships, merchantmen, and others who couldn't afford real ammunition).[19]

In China and other parts of Asia, fire arrows were thick, dartlike, rocket-propelled incendiary projectiles with barbed points, wrapped with pitch-soaked canvas which took fire when the rocket was launched, which could either be from special launching racks or from a cannon barrel (see Chongtong, Bō hiya.) The point stuck in sails, hulls or spars and set fire to the enemy ship. In Western naval warfare, shore forts sometimes heated iron shot red-hot in a special furnace before loading it (with water-soaked wads to prevent it from setting off the powder charge prematurely.) The hot shot lodging in a ship's dry timbers would set the ship afire. Because of the danger of fire aboard (and the difficulty of heating and transporting the red-hot shot aboard ship), heated shot was seldom used from ship-mounted cannon, as the danger to your own vessels was almost as great as to the enemy; fire was the single greatest fear of all men sailing in wooden ships. As such, for men aboard these vessels, going up against shore artillery firing heated shot was a terrifying experience, and typically wooden fleets were not expected to brave such fire except in cases of great emergency, as a single heated shot could easily destroy the entire ship and crew, while the same ship could typically be expected to survive numerous hits from normal solid shot.

In later years, the spherical exploding shell came into use. It first saw use in shore fortifications, and then relatively low-risk applications like bomb-ketches, which used mortars, which required an explosive shell to be effective. However, the long trajectory of a mortar meant that equally long fuses could be used, which reduced the risk of premature explosion, and such vessels were small and cheap in any case. It took some time for them to be adopted aboard surface combat ships, largely due to the imprecise nature of the fuses then available; with the short fuse-lengths required at naval battle ranges, it was not uncommon for shells to explode inside the gun barrel, or shortly after leaving the muzzle, which would pose a great risk to the vessel, and combat vessels represented a very large investment and a government could ill-afford to lose them. The risk of having to have such dangerous ammunition stocked above waterline during combat was also cited, as gunpowder contained in a vessel will explode with far more violence than that simply packed in a fabric sack, as propellant charges were. The strongly traditionalist nature of many senior naval officers was also a factor. Nevertheless, eventually, explosive shells were adopted for use aboard ship by the early 19th century. It had already been proven, from ships facing bombardment from shell-armed shore batteries, that wooden ships were horribly vulnerable to shell-fire, which both caused massive blast and wood- and metal-fragmentation damage (and hence very high crew casualties), but also scattered red-hot, jagged fragments all about, which embedded themselves into the wooden hull and acted much the same as the feared heated shot, or simply ignited many of the flammable objects and materials laying about on a normal wooden ship...lighting oils, tar, tarred cords, powder charges, etc. The quick destruction wrought by explosive shells on vessels during the American Civil War brought quick recognition of this fact, in most cases, at least.

Although it is popularly believed that it was the advent of the ironclad vessel that single-handedly brought about the end of the wooden sailing ship, the recognition of their terrible vulnerability to explosive shells was equally vital in this transition, if not more so. Even without the factor of armored hulls to consider, the spectre of fleets of wooden ships decimating each other with shell-fire was unattractive to naval nations like Great Britain, who relied not only on maintaining a great fleet, but also on capturing enemy vessels to contribute. The idea of a battle that not only would likely cost them over half of their engaged vessels, even in victory, but would also likely leave few if any suitable candidates for capture was unappealing. Combined with the protection afforded by ironclad hulls, the destructive power of explosive shells on wooden vessels ensured their rapid replacement in the first-line combat duties with ironclad vessels.

Bomb ketch

In this view of the Battle of Copenhagen (1801), bomb vessels in the left foreground fire over the British and Danish lines of battle into the city in the background

The bomb ketch was developed as a wooden sailing naval ship with its primary armament as mortars mounted forward near the bow and elevated to a high angle, and projecting their fire in a ballistic arc. Explosive shells or carcasses were employed rather than solid shot. Bomb vessels were specialized ships designed for bombarding (hence the name) fixed positions on land.

The first recorded deployment of bomb vessels by the English was for the Siege of Calais in 1347 when Edward III deployed single deck ships with Bombardes and other artillery.[20]

The first specialised bomb vessels were built towards the end of the 17th century, based on the designs of Bernard Renau d'Eliçagaray, and used by the French Navy.[21][22][23] Five such vessels were used to shell Algiers in 1682 destroying the land forts, and killing some 700 defenders. Two years later the French repeated their success at Genoa.[21] The early French bomb vessels had two forward-pointing mortars fixed side-by-side on the foredeck. To aim these weapons, the entire ship was rotated by letting out or pulling in a spring anchor.[22] The range was usually controlled by adjusting the gunpowder charge.[21]

The Royal Navy[21] continued to refine the class over the next century or more, after Huguenot exiles brought designs over to England and the United Provinces. The side-by-side, forward-pointing mortars were replaced in the British designs by mortars mounted on the centerline on revolving platforms. These platforms were supported by strong internal wooden framework to transmit the forces of firing the weapons to the hull. The interstices of the framework were used as storage areas for ammunition. Early bomb vessels were rigged as ketches with two masts. They were awkward vessels to handle, in part because bomb ketches typically had the masts stepped farther aft than would have been normal in other vessels of similar rig, in order to accommodate the mortars forward and provide a clear area for their forwards fire. As a result, by the 1800s British bomb vessels were designed as full rigged ships with three masts, and two mortars, one between each neighboring pair of masts.[24]

Scientific gunnery

New Principles in Gunnery by Benjamin Robins put the art of gunnery onto a scientific basis.

The art of gunnery was put on a scientific basis in the mid 18th century. British military engineer Benjamin Robins used Newtonian mechanics to calculate the projectile trajectory while taking the air resistance into account. He also carried out an extensive series of experiments in gunnery, embodying his results in his famous treatise on New Principles in Gunnery (1742), which contains a description of his ballistic pendulum (see chronograph).

Robins also made a number of important experiments on the resistance of the air to the motion of projectiles,[25][26][27] and on the force of gunpowder, with computation of the velocities thereby communicated to projectiles. He compared the results of his theory with experimental determinations of the ranges of mortars and cannon, and gave practical maxims for the management of artillery. He also made observations on the flight of rockets, and wrote on the advantages of rifled gun barrels.

Robins argued for the use of larger bore cannon and the importance of tightly fitting cannonballs. His work on gunnery was translated into German by Leonhard Euler and was heavily influential on the development of naval weaponry across Europe.

Technical innovations

By the outbreak of the French Revolutionary Wars in 1793, a series of technical innovations over the course of the late 18th century combined to give the British fleet a distinct superiority over the ships of the French and Spanish navies.

Carronade was a small gun, devastating at short range.

The carronade was a short-barrelled gun which threw a heavy ball developed by the Carron Company, a Scottish ironworks, in 1778. Because of irregularities in the size of cannonballs and the difficulty of boring out gun barrels, there was usually a considerable gap between the ball and the bore—often as much as a quarter of an inch—with a consequent loss of efficiency. This gap was known as the "windage". The manufacturing practices introduced by the Carron Company reduced the windage considerably, enabling the ball to be fired with less powder and hence a smaller and lighter gun. The carronade was half the weight of an equivalent long gun, but could throw a heavy ball over a limited distance. The light weight of the carronade meant that the guns could be added to the forecastle and quarterdeck of frigates and ships of the line, increasing firepower without affecting the ship's sailing qualities. It became known as the "Smasher" and gave ships armed with carronades a great advantage at short range.[28]

Admiralty carriage mount for an 18-pounder carronade, 1808.

The mounting, attached to the side of the ship on a pivot, took the recoil on a slider. The reduced recoil did not alter the alignment of the gun. The smaller gunpowder charge reduced the guns' heating in action. The pamphlet advocated the use of woollen cartridges, which, although more expensive, eliminated the need for wadding and worming. Simplifying gunnery for comparatively untrained merchant seamen in both aim and reloading was part of the rationale for the gun. The replacement of trunnions by a bolt underneath, to connect the gun to the mounting, reduced the width of the carriage enhancing the wide angle of fire. A carronade weighed a quarter as much and used a quarter to a third of the gunpowder charge for a long gun firing the same cannonball.[29]

Its invention is variously ascribed to Lieutenant General Robert Melville in 1759, or to Charles Gascoigne, manager of the Carron Company from 1769 to 1779. Carronades initially became popular on British merchant ships during the American Revolutionary War. A lightweight gun that needed only a small gun crew and was devastating at short range was a weapon well suited to defending merchant ships against French and American privateers. In the Action of 4 September 1782, the impact of a single carronade broadside fired at close range by the frigate HMS Rainbow under Henry Trollope caused a wounded French captain to capitulate and surrender the Hebe after a short fight.[30]

12-pounder U.S. Shrapnel Shell ca. 1865.

Flintlock firing mechanisms for cannon were suggested by Captain Sir Charles Douglas and introduced during the American War of Independence in place of the traditional matches. Flintlocks enabled a higher rate of fire and greater accuracy as the gun captain could choose the exact moment of firing. Prior to this the Royal Navy introduced the use of goose quills filled with powder during the Seven Years' War giving an almost instantaneous burn time compared with earlier methods of detonation.

Douglas also innovated a system that greatly increased the field of fire. By the simple expedient of attaching the gun ropes at a greater distance from the gunports, the range through which each cannon could be traversed was greatly improved. The new system was first tested at the Battle of the Saintes in 1782, where the Duke, Formidable and Arrogant, and perhaps other British ships, had adopted Douglas's new system.

The shrapnel shell was developed in 1784, by Major General Henry Shrapnel of the Royal Artillery. Canister shot was already in widespread use at the time; a tin or canvas container filled with small iron or lead balls burst open when fired, giving the effect of an oversized shotgun shell. Shrapnel's innovation was to combine the multi-projectile shotgun effect of canister shot, with a time fuze to open the canister and disperse the bullets it contained at some distance along the canister's trajectory from the gun. His shell was a hollow cast-iron sphere filled with a mixture of balls and powder, with a crude time fuse. If the fuse was set correctly then the shell would break open, either in front or above the intended target, releasing its contents (of musket balls). The shrapnel balls would carry on with the "remaining velocity" of the shell. In addition to a denser pattern of musket balls, the retained velocity could be higher as well, since the shrapnel shell as a whole would likely have a higher ballistic coefficient than the individual musket balls (see external ballistics).

Industrial era

The Industrial Revolution introduced steam-powered ironclad warships seemingly impervious to cast cannon. The inadequacy of naval artillery caused the naval ram to reappear as a means of sinking armored warships.[31] The rapidity of innovation through the last half of the 19th century caused some ships to be obsolete before they were launched.[32] Maximum projectile velocity obtainable with gunpowder in cast cannon was approximately 480 m/s (1,600 ft/s). Increased projectile weight through increased caliber was the only method of improving armor penetration with this velocity limitation. Some ironclads carried extremely heavy, slow-firing guns of calibres up to 16.25 inches (41.3 cm).[31] These guns were the only weapons capable of piercing the ever-thicker iron armour on the later ironclads, but required steam powered machinery to assist loading cannonballs too heavy for men to lift.[33]

Explosive shells

Explosive shells had long been in use in ground warfare (in howitzers and mortars), but they were only fired at high angles and with relatively low velocities. Shells are inherently dangerous to handle, and no solution had been found yet to combine the explosive character of the shells with the high power and flatter trajectory of a high velocity gun.

However, high trajectories were not practical for marine combat and naval combat essentially required flat-trajectory guns in order to have some decent odds of hitting the target. Therefore, naval warfare had consisted for centuries of encounters between flat-trajectory cannons using inert cannonballs, which could inflict only local damage even on wooden hulls.[34]

The first naval gun designed to fire explosive shells was the Paixhans gun, developed by the French general Henri-Joseph Paixhans in 1822–1823. He advocated using flat-trajectory shell guns against warships in 1822 in his Nouvelle force maritime et artillerie,[35] and developed a delaying mechanism which, for the first time, allowed shells to be fired safely in high-powered flat-trajectory guns. The effect of explosive shells lodging into wooden hulls and then detonating, was potentially devastating. This was first demonstrated by Henri-Joseph Paixhans in trials against the two-decker Pacificateur in 1824, in which he successfully broke up the ship.[34] Two prototype Paixhans guns had been founded in 1823 and 1824 for this test. Paixhans reported the results in Experiences faites sur une arme nouvelle.[35] The shells were equipped with a fuse which ignited automatically when the gun was fired. The shell would then lodge itself in the wooden hull of the target, before exploding a moment later.[36]

The first Paixhans guns for the French Navy were manufactured in 1841. The barrel of the guns weighed about 10,000 lbs. (4.5 metric tons), and proved accurate to about two miles. In the 1840s, Britain, Russia and the United States adopted the new naval guns. The effect of the guns in an operational context was decisively demonstrated during the Crimean War. The incendiary properties of exploding shells demonstrated the obsolescence of wooden warships in the 1853 Battle of Sinop;[37] but detonation effectiveness was limited by use of gunpowder bursting charges. Early high explosives used in torpedo warheads would detonate during the acceleration of firing from a gun. After brief use of dynamite guns aboard USS Vesuvius,[38] picric acid became widely used in conventional naval artillery shells during the 1890s.

Breech-loading, rifled artillery

Screw breech system of 7-inch Armstrong gun.

William Armstrong was awarded a contract by the British government in the 1850s to design a revolutionary new piece of artillery—the Armstrong Gun—produced at the Elswick Ordnance Company. This marked the birth of modern artillery both on land and at sea.[39][40] The piece was rifled, which allowed for a much more accurate and powerful action. The necessary machinery to accurately rifle artillery was only available by the mid-19th century.[41] The cast iron shell of the Armstrong gun was similar in shape to a Minié ball and had a thin lead coating which made it fractionally larger than the gun's bore and which engaged with the gun's rifling grooves to impart spin to the shell. This spin, together with the elimination of windage as a result of the tight fit, enabled the gun to achieve greater range and accuracy than existing smooth-bore muzzle-loaders with a smaller powder charge.

His gun was also a breech-loader. Although attempts at breech-loading mechanisms had been made since medieval times, the essential engineering problem was that the mechanism couldn't withstand the explosive charge. It was only with the advances in metallurgy and precision engineering capabilities during the Industrial Revolution that Armstrong was able to construct a viable solution. The gun combined all the properties that make up an effective artillery piece. The gun was mounted on a carriage in such a way as to return the gun to firing position after the recoil.

Diagram showing how the muzzle-loading gun on HMS Thunderer burst in 1879.

What made the gun really revolutionary lay in the technique of the construction of the gun barrel that allowed it to withstand much more powerful explosive forces. The "built-up" method involved assembling the barrel with wrought-iron (later mild steel was used) tubes of successively smaller diameter.[42] The tube would then be heated to allow it to expand and fit over the previous tube. When it cooled the gun would contract although not back to its original size, which allowed an even pressure along the walls of the gun which was directed inward against the outward forces that the gun firing exerted on the barrel.[43] Built-up guns with rifling made cast cannon obsolete by 1880.[44]

Armstrong's system was adopted in 1858, initially for "special service in the field" and initially he only produced smaller artillery pieces, 6-pounder (2.5 in/64 mm) mountain or light field guns, 9-pounder (3 in/76 mm) guns for horse artillery, and 12-pounder (3 inches /76 mm) field guns.

However, despite the gun's advantages, an 1863 Ordnance Select Committee decided to revert to muzzle-loading artillery pieces on the grounds of cost and efficiency.[45]

Large caliber breech-loading naval artillery became practical with French development of the interrupted screw obturator by Charles Ragon de Bange in 1872.[44] It was only after a serious accident on board the HMS Thunderer in 1879 when the left muzzleloading 12-inch (305 mm) gun in the forward turret[46] exploded during practice firing in the Sea of Marmora killing 11 and injuring a further 35, that the Royal Navy decisively changed to breech loading guns. Improved loading and handling procedures were also adopted, and Thunderer herself was re-equipped with long-calibre 10" breech-loaders. Breech loading artillery overcame barrel length limitations of cast cannon imposed by the necessity of retracting the cannon into the hull for reloading through the muzzle. Simultaneous availability of longer barrels[47] and slower burning brown powder increased projectile velocities to 650 m/s (2,100 ft/s).[31] Spin-stabilized elongated projectiles offered both reliable positioning of percussion fuzes[48] and improved armor penetration through increased sectional density.[49]

Gun turrets

Main article: Gun turret
HMS Prince Albert, a pioneering turret ship, built by naval engineer Cowper Phipps Coles.

Before the development of large-calibre, long-range guns in the mid-19th century, the classic battleship design used rows of port-mounted guns on each side of the ship, often mounted in casemates. Firepower was provided by a large number of guns which could only be aimed in a limited arc from one side of the ship. Due to instability, fewer larger and heavier guns can be carried on a ship. Also, the casemates often sat near the waterline, which made them vulnerable to flooding and restricted their use to calm seas.

Turrets were weapon mounts designed to protect the crew and mechanism of the artillery piece and with the capability of being aimed and fired in many directions as a rotating weapon platform. This platform can be mounted on a fortified building or structure such as an anti-naval land battery, or on a combat vehicle, a naval ship, or a military aircraft.

During the Crimean War, Captain Cowper Phipps Coles constructed a raft with guns protected by a 'cupola' and used the raft, named the Lady Nancy, to shell the Russian town of Taganrog in the Black Sea. The Lady Nancy "proved a great success",[50] and Coles patented his rotating turret after the war. Following Coles' patenting, the British Admiralty ordered a prototype of Coles' design in 1859, which was installed in the floating battery vessel, HMS Trusty, for trials in 1861, becoming the first warship to be fitted with a revolving gun turret. Coles' design aim was to create a ship with the greatest possible all round arc of fire, as low in the water as possible to minimise the target.[51]

HMS Captain was one of the first ocean-going turret ships.

The Admiralty accepted the principle of the turret gun as a useful innovation, and incorporated it into other new designs. Coles submitted a design for a ship having ten domed turrets each housing two large guns. The design was rejected as impractical, although the Admiralty remained interested in turret ships and instructed its own designers to create better designs. Coles enlisted the support of Prince Albert, who wrote to the first Lord of the Admiralty, the Duke of Somerset, supporting the construction of a turret ship. In January 1862, the Admiralty agreed to construct a ship, the HMS Prince Albert, which had four turrets and a low freeboard, intended only for coastal defence. Coles was allowed to design the turrets, but the ship was the responsibility of the chief Constructor Isaac Watts.[51]

Another of Coles' designs, HMS Royal Sovereign, was completed in August 1864. Its existing broadside guns were replaced with four turrets on a flat deck and the ship was fitted with 5.5 inches (140 mm) of armour in a belt around the waterline.[51] Early ships like Monitor and the Royal Sovereign had little sea-keeping qualities being limited to coastal waters. Coles, in collaboration with Sir Edward James Reed, went on to design and build HMS Monarch, the first seagoing warship to carry her guns in turrets. Laid down in 1866 and completed in June 1869, it carried two turrets, although the inclusion of a forecastle and poop prevented the guns firing fore and aft.[51]

Inboard plans of USS Monitor.

The gun turret was independently invented by the Swedish inventor John Ericsson in America, although his design was technologically inferior to Coles'.[52] Ericsson designed the USS 'Monitor in 1861. Its most prominent feature was a large cylindrical gun turret mounted amidships above the low-freeboard upper hull, also called the "raft". This extended well past the sides of the lower, more traditionally shaped hull. A small armored pilot house was fitted on the upper deck towards the bow, however, its position prevented Monitor from firing her guns straight forward.[53] [lower-alpha 1] One of Ericsson's prime goals in designing the ship was to present the smallest possible target to enemy gunfire.[54]

The turret's rounded shape helped to deflect cannon shot.[55][56] A pair of donkey engines rotated the turret through a set of gears; a full rotation was made in 22.5 seconds during testing on 9 February 1862.[54] Fine control of the turret proved to be difficult as the engine would have to be placed in reverse if the turret overshot its mark or another full rotation could be made. Including the guns, the turret weighed approximately 160 long tons (163 t); the entire weight rested on an iron spindle that had to be jacked up using a wedge before the turret could rotate.[54]

The spindle was 9 inches (23 cm) in diameter which gave it ten times the strength needed in preventing the turret from sliding sideways.[57] When not in use, the turret rested on a brass ring on the deck that was intended to form a watertight seal. In service, however, this proved to leak heavily, despite caulking by the crew.[54] The gap between the turret and the deck proved to be a problem as debris and shell fragments entered the gap and jammed the turrets of several Passaic-class monitors, which used the same turret design, during the First Battle of Charleston Harbor in April 1863.[58] Direct hits at the turret with heavy shot also had the potential to bend the spindle, which could also jam the turret.[59][60][61]

Turret of USS Monitor.

The turret was intended to mount a pair of 15-inch (380 mm) smoothbore Dahlgren guns, but they were not ready in time and 11-inch (280 mm) guns were substituted.[54] Each gun weighed approximately 16,000 pounds (7,300 kg). Monitor's guns used the standard propellant charge of 15 pounds (6.8 kg) specified by the 1860 ordnance for targets "distant", "near", and "ordinary", established by the gun's designer Dahlgren himself.[62] They could fire a 136-pound (61.7 kg) round shot or shell up to a range of 3,650 yards (3,340 m) at an elevation of +15°.[63][64]

HMS Thunderer represented the culmination of this pioneering work. An ironclad turret ship designed by Edward James Reed, it was equipped with revolving turrets that used pioneering hydraulic turret machinery to maneouvre the guns. It was also the world's first mastless battleship, built with a central superstructure layout, and became the prototype for all subsequent warships. HMS Devastation of 1871 was another pivotal design, and led directly to the modern battleship.

Armour-piercing shot

Palliser shot, the first armour-piercing shot for RML 7 inch gun, 1877.

The late 1850s saw the development of the ironclad warship, which carried wrought iron armor of considerable thickness. This armor was practically immune to both the round cast-iron cannonballs then in use and to the recently developed explosive shell.

The first solution to this problem was effected by Sir Major Sir W. Palliser. His Palliser shot, approved in 1867, was made of cast iron, the head being chilled in casting to harden it, using composite molds with a metal, water cooled portion for the head. At times there were defects that led to cracking in the projectiles but these were overcome with time. Bronze studs were installed into the outside of the projectile so as to engage the rifling grooves in the gun barrel. The base had a hollow pocket but was not filled with powder or explosive: the cavity was necessitated by difficulties in casting large solid projectiles without their cracking when they cooled, because the nose and base of the projectiles cooled at different rates, and in fact a larger cavity facilitated a better quality casting.[65]

At the Battle of Angamos (October 8, 1879) the Chilean ironclad warships fired 20 250 pound-Palliser gunshots against the Peruvian monitor Huáscar, with devastating results. It was the first time that such piercing shells were used in actual combat.[66]

These chilled iron shots proved very effective against wrought iron armor, but were not serviceable against compound and steel armor, which was first introduced in the 1880s. A new departure therefore had to be made, and forged steel rounds with points hardened by water took the place of the Palliser shot. At first, these forged-steel rounds were made of ordinary carbon steel, but as armor improved in quality, the projectiles followed suit.

During the 1890s and subsequently, cemented steel armor became commonplace, initially only on the thicker armor of warships. To combat this, the projectile was formed of steel—forged or cast—containing both nickel and chromium. Another change was the introduction of a soft metal cap over the point of the shell – so called "Makarov tips" invented by Russian admiral Stepan Makarov. This "cap" increased penetration by cushioning some of the impact shock and preventing the armor-piercing point from being damaged before it struck the armor face, or the body of the shell from shattering. It could also help penetration from an oblique angle by keeping the point from deflecting away from the armor face. (See: APCBC ammunition)

Increased armor penetration became possible when projectile velocities of 800 m/s (2,600 ft/s) were obtained as smokeless powder propellants[31] replaced gunpowder about 1900.[67]

Quick-firing artillery

Pre-Dreadnought battleship USS Oregon. Barrels of intermediate caliber guns are visible to the upper left of the large caliber turret in the foreground.

Underwater hull damage possible with torpedoes encouraged development of small, inexpensive torpedo boats capable of sinking the largest warships. By the end of the 19th century, all warships required a defensive battery of quick-firing guns capable of hitting fast, maneuverable torpedo boats.

The Royal Navy first introduced the Quick firing 4.7-inch gun in HMS Sharpshooter in 1889, and the Quick firing 6-inch MK 1 in HMS Royal Sovereign, launched 1891. Other navies followed suit; the French navy installed quick-firing weapons on its ships completed in 1894–5.[68]

Quick-firing guns were a key characteristic of the pre-dreadnought battleship, the dominant design of the 1890s. The quick-firing guns, while unable to penetrate thick armour, were intended to destroy the superstructure of an opposing battleship, start fires, and kill or distract the enemy's gun crews. The development of heavy guns and their increasing rate of fire meant that the quick-firer lost its status as the decisive weapon of naval combat in the early 1900s, though quick-firing guns were vital to defend battleships from attack by torpedo boats and destroyers, and formed the main armament of smaller vessels.

Most late-19th-century warships mounted naval artillery of more than one caliber because of uncertainty about the relative destruction possible from a few large shells (which might miss) in comparison to the increased hit probability of a larger number of less damaging small-caliber shells fired within the same time period. Quick-firing guns were initially breech-loading weapons firing ammunition small enough to be loaded by hand. Later substitution of brass cartridges for silk powder bags allowed increased rates of fire using sliding wedge breech blocks.[69] Increasing mechanization ultimately enabled similar rates of fire from naval artillery calibers up to 8 inches (20 cm).[70]

Fire control

Main article: Fire-control system
Accurate fire control systems were introduced in the early 20th century. Pictured, a cut-away view of a destroyer. The below decks analog computer is shown in the centre of the drawing and is labelled "Gunnery Calculating Position".

When gunnery ranges increased dramatically in the late 19th century it was no longer a simple matter of calculating the proper aim point, given the flight times of the shells. Increasingly sophisticated mechanical calculators were employed for proper gunlaying, typically with various spotters and distance measures being sent to a central plotting station deep within the ship. There the fire direction teams fed in the location, speed and direction of the ship and its target, as well as various adjustments for Coriolis effect, weather effects on the air, and other adjustments.

The resulting directions, known as a firing solution, would then be fed back out to the turrets for laying. If the rounds missed, an observer could work out how far they missed by and in which direction, and this information could be fed back into the computer along with any changes in the rest of the information and another shot attempted.

The situation for naval fire control was highly complex, due to the need to control the firing of several guns at once. In naval engagements both the firing guns and target are moving, and the variables are compounded by the greater distances and times involved. Rudimentary naval fire control systems were first developed around the time of World War I.[71]

Arthur Pollen and Frederic Charles Dreyer independently developed the first such systems. Pollen began working on the problem after noting the poor accuracy of naval artillery at a gunnery practice near Malta in 1900.[72] Lord Kelvin, widely regarded as Britain's leading scientist first proposed using an analogue computer to solve the equations which arise from the relative motion of the ships engaged in the battle and the time delay in the flight of the shell to calculate the required trajectory and therefore the direction and elevation of the guns.

Pollen aimed to produce a combined mechanical computer and automatic plot of ranges and rates for use in centralised fire control. To obtain accurate data of the target's position and relative motion, Pollen developed a plotting unit (or plotter) to capture this data. He added a gyroscope to allow for the yaw of the firing ship. Again this required substantial development of the, at the time, primitive gyroscope to provide continuous reliable correction.[73] Trials were carried out in 1905 and 1906, which although completely unsuccessful showed promise. He was encouraged in his efforts by the rapidly rising figure of Admiral Jackie Fisher, Admiral Arthur Knyvet Wilson and the Director of Naval Ordnance and Torpedoes (DNO), John Jellicoe. Pollen continued his work, with tests carried out on Royal Navy warships intermittently.

Meanwhile, a group led by Dreyer designed a similar system. Although both systems were ordered for new and existing ships of the Royal Navy, the Dreyer system eventually found most favour with the Navy in its definitive Mark IV* form. The addition of director control facilitated a full, practicable fire control system for World War I ships, and most RN capital ships were so fitted by mid 1916. The director was high up over the ship where operators had a superior view over any gunlayer in the turrets. It was also able to co-ordinate the fire of the turrets so that their combined fire worked together. This improved aiming and larger optical rangefinders improved the estimate of the enemy's position at the time of firing. The system was eventually replaced by the improved "Admiralty Fire Control Table" for ships built after 1927.

Big-gun battleships

Captain Percy Scott greatly improved the accuracy of gunnery at the turn of the 20th century.

Significant gunnery developments occurred in the late 1890s and the early 1900s, culminating with the launch of the revolutionary HMS Dreadnought in 1906. Sir Percy Scott was given command of HMS Scylla in 1896, where he was able to implement his new theories on gunnery, scoring the unprecedented success of 80% during the 1897 gunnery trials.[74][75] This was totally unprecedented, as the average in the Royal Navy was just 28%.[76]

Scott noted that night time signalling between ships in the fleet was slow and inaccurate. He addressed this in two ways: he devised training aids and put his signallers under instruction and he devised a new more effective flashing lamp. The new efficiency of his ship's signalling was adopted by the whole Mediterranean fleet. He devised a new sub-calibre gun which involved fitting a one-inch-calibre rifled barrel inside the barrel of the main armament but which used the main gun's controls. and came up with new sights employing telescope optics and new training targets.[77] In the Navy's 1901 prize firing Terrible achieved the same score of 80%, and Scott's gunnery practices were adopted by other ships in the fleet.[78] Later, Scott taught at the naval gunnery school at Whale Island, Hampshire.[79] a largely honorary role which he held until promotion to flag rank in 1905.[80]

The development of the torpedo meant that it became necessary to engage an enemy at ranges outside torpedo range. This in turn meant that the old system whereby a gunlayer in each turret pointed and fired the turret guns independently could no longer be expected to achieve a significant hit rate on an opposing ship. Scott was instrumental in encouraging the development and installation of director firing, a system whereby the guns were all pointed, elevated and fired from a single point, usually at the top of the foremast. By firing all the guns simultaneously it was possible to observe the simultaneous splashes produced and correct the aim visually.

Turret with twin 12-inch Mk X guns. Two 12-pounder guns for defence against torpedo boats are mounted on the roof.

As battle ranges were pushed out to an unprecedented 6,000 yards (5,500 m), the distance was great enough to force gunners to wait for the shells to arrive before applying corrections for the next salvo. A related problem was that the shell splashes from the more numerous smaller weapons tended to obscure the splashes from the bigger guns. Either the smaller-calibre guns would have to hold their fire to wait for the slower-firing heavies, losing the advantage of their faster rate of fire, or it would be uncertain whether a splash was due to a heavy or a light gun, making ranging and aiming unreliable.[81] Italian naval architect Vittorio Cuniberti first argued for the concept of an all-big-gun battleship in 1903, proposing an "ideal" future British battleship of 17,000 long tons (17,000 t), with a main battery of a dozen 12-inch guns in eight turrets, 12 inches of belt armour, and a speed of 24 knots (44 km/h; 28 mph).[81]

First Sea Lord Sir John Fisher pushed through the Board of Admiralty a decision to arm the next battleship with 12-inch guns and that it would have a speed no less than 21 knots (39 km/h). The result was the HMS Dreadnought, which rendered all previous ships immediately obsolescent on its launch in 1906. The ship mounted the 45-calibre BL 12-inch Mark X gun in five twin gun turrets. These could deliver a broadside of a maximum of eight guns and could be elevated up to +13.5°. They fired 850-pound (390 kg) projectiles at a muzzle velocity of 2,725 ft/s (831 m/s); at 13.5°, this provided a maximum range of 16,450 m (17,990 yd) with armour-piercing (AP) 2 crh shells. At 16° elevation, the range was extended to 20,435 yd (18,686 m) using the more aerodynamic, but slightly heavier 4 crh AP shells. The rate of fire of these guns was one to two rounds per minute.[82] The ships carried 80 rounds per gun.[83]

Within five years of the commissioning of Dreadnought, a new generation of more powerful "super-dreadnoughts" was being built. The arrival of the super-dreadnought is commonly believed to have started with the British Orion class. What made them 'super' was the unprecedented 2,000-ton jump in displacement, the introduction of the heavier 13.5-inch (343 mm) gun, and the placement of all the main armament on the centerline. In the four years between Dreadnought and Orion, displacement had increased by 25%, and weight of broadside had doubled.[84]

In comparison to the rapid obsolescence of the preceding half-century, naval artillery changed comparatively little through World War I and World War II. Battleships remained similar to Dreadnought, torpedo boats evolved into destroyers, and ships of intermediate size were called cruisers. All ship types became larger as the calibre of heavy guns increased (to a maximum of 46 centimetres (18 in) in the Yamato-class battleships), but the number of guns carried remained similar. Smaller ships used smaller-calibre weapons which were also used on battleships as the defensive secondary armament.[85]

High-angle artillery

Gunners with a high angle QF 4-inch MK V gun on HMAS Canberra c. 1940.

Although naval artillery had been designed to perform within the classical broadside tactics of the age of sail, World War I demonstrated the need for naval artillery mounts capable of greater elevation for defending against aircraft. High-velocity naval artillery intended to puncture side armor at close range was theoretically capable of hitting targets miles away with the aid of fire control directors; but the maximum elevation of guns mounted within restrictive armored casemates prevented reaching those ranges. Dual purpose guns were devised to protect ships against both torpedo boats and aircraft.

The QF 4 inch Mk V naval gun was one of the first artillery pieces to be adapted as an anti-aircraft gun and mounted on ships for defence. It was first used in 1914 as a secondary armament on Arethusa class cruisers in a high-angle anti-aircraft role.[86]

Most naval artillery on ships built after World War I was capable of elevating to at least 45°, and some guns as large as 8 inches (20 cm) were capable of elevating to 70° for potential use against aircraft.[87] As the role of destroyers expanded to include protection from submarines, they were fitted with high-angle depth charge mortars (called Y-guns, K-guns or squid).[88]

Battleships were used in support of amphibious operations since the late 19th century in the form of naval bombardment. At the beginning of World War I its principal practitioner was the Royal Navy. During the War RN ships fired against targets at Gallipoli, the Salonika Front and along the Belgian Coast. In the Aegean, the problems were not especially challenging, and enemy coastal defences (forts, shore-batteries etc.) were fairly unsophisticated; but along the Belgian Coast the Germans constructed an extensive, well-equipped and well-coordinated system of gun-batteries to defend the coast. Ports, such as Ostend and Zeebrugge were of major importance to the U-Boat campaign and were frequently bombarded by British monitors operating from Dover and Dunkirk.

Animated naval gun operations.

The Royal Navy continually advanced their technology and techniques necessary to conduct effective bombardments in the face of the German defenders—firstly refining aerial reconnaissance techniques, then experimenting with night-bombardment and moving on to adopt indirect fire. Finally, in the summer of 1918, monitors were equipped with Gyro Director Training gear, which effectively provided the Director with a gyro-stabilised Artificial Line of Sight, and thereby enabled a ship to carry out Indirect Bombardment while underway. This was a very significant advance, and established a firm foundation for Naval Bombardment as practiced by the RN and USN during the Second World War.

The United States Navy battleship USS Idaho (BB-42) shells Japanese defenses on Okinawa on 1 April 1945.

The practice reached its zenith during World War II, when the availability of man-portable radio systems and sophisticated relay networks allowed forward observers to transmit targeting information and provide almost instant accuracy reports—once troops had landed. Battleships, cruisers and destroyers would pound shore installations, sometimes for days, in the hope of reducing fortifications and attriting defending forces. Obsolete battleships unfit for combat against other ships were often used as floating gun platforms expressly for this purpose. However, given the relatively primitive nature of the fire control computers and radar of the era combined with the high velocity of naval gunfire, accuracy was poor until troops landed and were able to radio back reports to the ship.

Naval gunfire could reach as far as 20 miles (32 km) inland, and was often used to supplement land-based artillery. The heavy-calibre guns of some eighteen battleships and cruisers were used to stop German Panzer counterattack at Salerno. Naval gunfire was used extensively throughout Normandy, although initially the surprise nature of the landings themselves precluded a drawn-out bombardment which could have reduced the Atlantic Wall defences sufficiently, a process that fell to specialist armoured vehicles instead.[89]

Decline

Guided missiles began to replace naval artillery as more effective weapons against aircraft and ships in the mid-20th century. Naval artillery calibers greater than 5 inches (13 cm) were used primarily for naval gunfire support after 1944; and no new ships were built with larger naval artillery. Submarines shed deck guns as a handicap in modern naval tactics.

Destroyers and frigates carry a single gun of 3- to 5-inch calibre (76.2–127mm) as a backup to missile systems and capable of land fire support. Remaining roles of naval artillery like the 20mm Phalanx CIWS system are for short-range defence against targets which cannot be engaged by guided weapons systems. The US 5"/54 caliber Mark 45 gun is capable of firing 20 rounds per minute to a range of 20 miles.

In the early 21st century the use of railguns mounted on ships is under study.

See also

References

  1. Ericsson later admitted that this was a serious flaw in the ship's design and that the pilot house should have been placed atop the turret.
  1. Castex, Jean-Claude (2004). Dictionnaire des batailles navales franco-anglaises. Presses de l'Université Laval. p. 21.
  2. 1 2 Rodger, N.A.M. (1996). "The Development of Broadside Gunnery, 1450-1650". The Mariner's Mirror. Society for Nautical Research. 82 (3): 302.
  3. 1 2 Rodrigues and Tevezes (2009: p. 193)
  4. 1 2 Rodger, Nicholas A. M. (1997). The Safeguard of the Sea: A Naval History of Britain 660–1649. W.W. Norton & Company, New York. pp. 205–7. ISBN 0-393-04579-X.
  5. Breyer pp.17–18
  6. 1 2 Potter & Nimitz pp.16 & 26
  7. By Sweat and Sword: Trade, Diplomacy and War in Kerala Through the Ages|Author:K. K. Nair |Publisher:KK Nair |year:2013 |Page: 154 |ISBN 978-8173049736
  8. The Cambridge Illustrated History of Warfare: The Triumph of the West - Geoffrey Parker, pp. 125-130, Cambridge University Press, 1995
  9. Rodrigues and Tevezes (2009: p. 263) emphasize its importance as a crown industry the coincidence between the producer and consumer of the product. Portuguese naval artillery was rarely faulty or exploded from misuse, not only because of crown self-interest in quality during production, but also because defective domestic pieces (unlike imported ones) were easy to fix or replace locally.
  10. Cipolla (1965)
  11. Rodrigues and Tevezes (2009: pp. 260–64)
  12. Garcia de Resende (lines 8219 to 8220)
  13. Franceschi Brissou (lines 1283 to 1284)
  14. It was not until the 1590s that the word "broadside" in English was commonly used to refer to gunfire from the side of a ship rather than the ship's side itself; Rodger, Nicholas A. M. (1996). The Development of Broadside Gunnery, 1450–1650. pp. 301–24.
  15. 1 2 3 4 Alexzandra Hildred (2009). Peter Marsden, ed. Your Noblest Shippe: Anatomy of a Tudor Warship. The Archaeology of the Mary Rose, Volume 2. The Mary Rose Trust, Portsmouth. pp. 297–344. ISBN 978-0-9544029-2-1.
  16. Breyer p.18
  17. 1 2 3 Rodger, Nicholas (2004). The Command of the Ocean:A Naval History of Britain 1649–1815. Penguin Books. p. 420. ISBN 0-14-028896-1.
  18. BBC: 'Superguns' of Elizabeth I's navy. The wreck of an English full-rigged pinnace dating from around 1592 with 12 matched guns was discovered, and guns were recovered in 2009
  19. Bannerman, David B. (1954) Bannerman 90th Anniversary Military Goods Catalog Francis Bannerman Sons, New York pp.90–107
  20. Royal Artillery Institution, ed. (1894). Journal of the Royal Artillery. Woolwich: Royal Artillery Institution. 21: 31. Missing or empty |title= (help)
  21. 1 2 3 4 Spencer Tucker (2000). Handbook of 19th Century Naval Warfare. Naval Institute Press. pp. 4–5. ISBN 0-7509-1972-8.
  22. 1 2 Tuncay Zorlu (2008). Innovation and Empire in Turkey: Sultan Selim III and the Modernisation of the Ottoman Navy. I.B.Tauris. p. 128. ISBN 978-1-84511-694-1.
  23. Stephen Bull (2004). Encyclopedia of Military Technology and Innovation. Greenwood Publishing Group. p. 44. ISBN 978-1-57356-557-8.
  24. Leo Block (2003). To Harness the Wind: A Short History of the Development of Sails. Naval Institute Press. p. 65. ISBN 978-1-55750-209-4.
  25. "Wind Tunnel, History", AviationEarth
  26. "Wind Tunnels of NASA", Donald D. Baals and William R. Corliss
  27. Steele, Brett (April 1994), "Technology and Culture", Technology and Culture, Baltimore: The Johns Hopkins University Press, 35 (2): 348–382, ISSN 0040-165X, JSTOR 3106305 |chapter= ignored (help)
  28. Rodger, Nicholas (2004). The Command of the Ocean: A Naval History of Britain 1649–1815. Penguin Books. ISBN 978-0-14-028896-4.
  29. p 84 J. Guillmartin "Ballistics in the Black Powder era" p 73–98 in ROYAL ARMOURIES CONFERENCE PROCEEDINGS.; British naval armament 1600–1900; London, 1987; Nov, 1989,
  30. "Introducing the Carronade". Age Of Sail · Life at sea during the age of wooden ships and iron men. Retrieved 15 October 2013.
  31. 1 2 3 4 Breyer pp.28–38
  32. Potter & Nimitz p.239
  33. Potter & Nimitz p.266
  34. 1 2 Of arms and men Robert L. O'Connell p.193
  35. 1 2 Artillery Jeff Kinard, Spencer C. (INT) Tucker p. 235–236
  36. A treatise on naval gunnery by Sir Howard Douglas p.297
  37. Potter & Nimitz p.241
  38. University of New Mexico NROTC Sun Line Vol.II No.3 March 1964
  39. Marshall J. Bastable. "From Breechloaders to Monster Guns: Sir William Armstrong and the Invention of Modern Artillery, 1854–1880". Technology and Culture. 33: 213. doi:10.2307/3105857. Retrieved November 19, 2013.
  40. "William Armstrong".
  41. "The Emergence of Modern War".
  42. Armstrong Rifled Breech Loading (RBL) 6-Pounder
  43. Holley states that Daniel Treadwell first patented the concept of a central steel tube kept under compression by wrought-iron coils and that Armstrong's assertion that he (Armstrong) first used a wrought-iron A-tube and hence did not infringe the patent, was disingenuous, as the main point in Treadwell's patent was the tension exerted by the wrought-iron coils, which Armstrong used in exactly the same fashion. Holley, Treatise on Ordnance and Armour, 1865, pages 863–870
  44. 1 2 Potter & Nimitz pp. 331–332
  45. Ruffell, WL. "The Gun - Rifled Ordnance: Whitworth". The Gun. Archived from the original on 13 February 2008. Retrieved 2008-02-06.
  46. Sir Thomas Brassey, The British Navy, Volume II. London: Longmans, Green and Co. 1882 pp. 81–85
  47. Frieden p.461
  48. Potter & Nimitz p.243
  49. Fairfield p.157
  50. Preston, Antony (2002). The World's Worst Warships. London: Conway Maritime Press. p. 21. ISBN 0-85177-754-6.
  51. 1 2 3 4 K. C. Barnaby (1968). Some ship disasters and their causes. London: Hutchinson. pp. 20–30.
  52. Stanley Sandler (2004). Battleships: An Illustrated History of Their Impact. ABC-CLIO. pp. 27–33.
  53. Tucker, Spencer (2006). Blue & gray navies: the Civil War afloat. Maryland: Naval Institute Press. p. 171. ISBN 1-59114-882-0.
  54. 1 2 3 4 5 Thompson, Stephen C. (1990). "The Design and Construction of the USS Monitor". Warship International. Toledo, Ohio: International Naval Research Organization. XXVII (3). ISSN 0043-0374.
  55. Mindell, David A. (2000). War, Technology, and Experience Aboard the USS Monitor. Johns Hopkins University Press. p. 41. ISBN 978-0-8018-6250-2.
  56. McCordock, Robert Stanley (1938). The Yankee Cheese Box. Dorrance. p. 31.
  57. Baxter, James Phinney, 3rd (1968). The Introduction of the Ironclad Warship (reprint of the 1933 publication ed.). Hamden, Connecticut,: Archon Books. p. 256. OCLC 695838727.
  58. Canney, Donald L. (1993). The Old Steam Navy. 2: The Ironclads, 1842–1885. Annapolis, Maryland: Naval Institute Press. pp. 79–80. ISBN 0-87021-586-8.
  59. Reed, Sir Edward James (1869). Our Iron-clad Ships: Their Qualities, Performances, and Cost. With Chapters on Turret Ships, Iron-clad Rams. London: J. Murray. pp. 253–54.
  60. Broadwater, John D. (2012). USS Monitor: A Historic Ship Completes Its Final Voyage. Texas A&M University Press. p. 8. ISBN 978-1-60344-473-6.
  61. Wilson, H. W. (1896). Ironclads in Action: A Sketch of Naval Warfare From 1855 to 1895. 1. Boston: Little, Brown. p. 30.
  62. Field, Ron (2011). Confederate Ironclad vs Union Ironclad: Hampton Roads. Osprey Publishing. p. 33. ISBN 978-1-78096-141-5.
  63. Olmstead, Edwin; Stark, Wayne E.; Tucker, Spencer C. (1997). The Big Guns: Civil War Siege, Seacoast, and Naval Cannon. Alexandria Bay, New York: Museum Restoration Service. p. 90. ISBN 0-88855-012-X.
  64. Lyon, David & Winfield, Rif The Sail and Steam Navy List, all the ships of the Royal Navy 1815–1889, pub Chatham, 2004, ISBN 1-86176-032-9 pages 240–2
  65. "Treatise on Ammunition" 4th Edition 1887, page 236.
  66. "The Amazing Huascar"
  67. Sharpe pp. 146–149
  68. Gardiner, Robert; Lambert, Andrew, eds. (2001). Steam, Steel and Shellfire: The Steam Warship, 1815–1905. Conway's History of the Ship. Book Sales. ISBN 978-0-7858-1413-9., p. 161
  69. Fairfield p.360
  70. Campbell pp.127–131
  71. For a description of one, see US Naval Fire Control, 1918.
  72. Pollen 'Gunnery' p. 23
  73. Pollen 'Gunnery' p. 36
  74. Padfield, Peter. Aim Straight (1968)
  75. The London Gazette: (Supplement) no. 26359. p. 2. 2 January 1893. Retrieved 14 November 2012.
  76. Scott (1919), p. 142
  77. Scott (1919), pp. 81–85
  78. Scott (1919), pp. 157–158
  79. The London Gazette: no. 27596. p. 5665. 11 September 1903. Retrieved 14 November 2012.
  80. The London Gazette: no. 27770. p. 1575. 3 March 1905. Retrieved 14 November 2012.
  81. 1 2 Brown, David K. (2003). Warrior to Dreadnought: Warship Development 1860–1905 (reprint of the 1997 ed.). London: Caxton Editions. pp. 180–82. ISBN 1-84067-529-2.
  82. "Britain 12"/45 (30.5 cm) Mark X". navweaps.com. 30 January 2009. Retrieved 11 November 2009.
  83. Burt, R. A. (1986). British Battleships of World War One. Annapolis, MD: Naval Institute Press. ISBN 0-87021-863-8.
  84. Breyer 1973, p. 126.
  85. Potter & Nimitz p.336
  86. Tony DiGiulian's webpage provides comprehensive information on this gun's Naval service. Tony DiGiulian (January 13, 2008). "British 4"/45 (10.2 cm) QF Mark V and Mark XV". Retrieved 2008-03-29.
  87. Whitley p.177
  88. Campbell pp. 91–93
  89. Donald M. Weller, "Salvo-Splash: The Development Of Naval Gunfire Support In World War II," U.S. Naval Institute Proceedings (1954) 80#8 pp 839–849 and 80#9 pp 1011–1021

Bibliography

Wikimedia Commons has media related to Naval artillery.
This article is issued from Wikipedia - version of the 10/23/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.