Malonic acid

Not to be confused with malic acid or maleic acid.
Malonic acid
Skeletal formula of malonic acid
Ball-and-stick model of the malonic acid molecule
Names
Preferred IUPAC name
Propanedioic acid
Other names
Malonic acid
Methanedicarboxylic acid
Identifiers
141-82-2 YesY
3D model (Jmol) Interactive image
Interactive image
ChEBI CHEBI:30794 YesY
ChEMBL ChEMBL7942 YesY
ChemSpider 844 YesY
DrugBank DB02175 YesY
ECHA InfoCard 100.005.003
PubChem 867
Properties
C3H4O4
Molar mass 104.06 g·mol−1
Density 1.619 g/cm3
Melting point 135 to 137 °C (275 to 279 °F; 408 to 410 K) (decomposes)
Boiling point decomposes
Miscible
Acidity (pKa) pKa1 = 2.83[1]
pKa2 = 5.69[1]
Related compounds
Other anions
malonate
acetic acid
oxalic acid
propionic acid
tartronic acid
acrylic acid
butyric acid
succinic acid
fumaric acid
Related compounds
propanone
propionaldehyde
propanedial
dimethyl malonate
Hazards
Safety data sheet External MSDS
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY verify (what is YesYN ?)
Infobox references

Malonic acid (IUPAC systematic name: propanedioic acid) is a dicarboxylic acid with structure CH2(COOH)2. The ionized form of malonic acid, as well as its esters and salts, are known as malonates. For example, diethyl malonate is malonic acid's diethyl ester. The name originates from the Greek word μᾶλον (malon) meaning 'apple'.

Biochemistry

Malonic acid is often mistakenly believed to occur in beetroot at high concentration, and a study on the composition of sugar beet liquors revealed no malonic acid.[2] It exists in its normal state as white crystals. Malonic acid is the classic example of a competitive inhibitor: It acts against succinate dehydrogenase[3] (complex II) in the respiratory electron transport chain.

Preparation

A classical preparation of malonic acid starts from chloroacetic acid:[4]

Preparation of malonic acid from chloroacetic acid.

Sodium carbonate generates the sodium salt, which is then reacted with sodium cyanide to provide the cyano acetic acid salt via a nucleophilic substitution. The nitrile group can be hydrolyzed with sodium hydroxide to sodium malonate, and acidification affords malonic acid. Industrially, however, malonic acid is produced by hydrolysis of dimethyl malonate or diethyl malonate.[5]

Malonic acid was first prepared in 1858 by the French chemist Victor Dessaignes (1800-1885) via the oxidation of malic acid.[6]

More recently, malonic acid has been produced through fermentation of glucose. This higher yielding route could offer environmental benefits via elimination of cyanide and chloroacetic acid use in addition to carbon sequestration.[7]

Organic reactions

In a well-known reaction, malonic acid condenses with urea to form barbituric acid. Malonic acid is also frequently used as an enolate in Knoevenagel condensations or condensed with acetone to form Meldrum's acid. The esters of malonic acid are also used as a CH2COOH synthon in the malonic ester synthesis.

Additionally, the coenzyme A derivative of malonate, malonyl-CoA, is an important precursor in fatty acid biosynthesis along with acetyl CoA. Malonyl CoA is formed from acetyl CoA by the action of acetyl-CoA carboxylase, and the malonate is transferred to an acyl carrier protein to be added to a fatty acid chain.

Malonic acid is also known to be a competitive inhibitor of succinic dehydrogenase, the enzyme responsible for the dehydrogenation of succinate within Krebs cycle.

Applications

Malonic acid is a precursor to specialty polyesters. It can be converted into 1,3 propanediol for use in polyesters and polymers and a projected market size of $621.2 million by 2021. It can also be a component in alkyd resins, which are used in a number of coatings applications for protecting against damage caused by UV light, oxidation, and corrosion. One application of malonic acid is in the coatings industry as a crosslinker for low-temperature cure powder coatings, which are becoming increasingly valuable for heat sensitive substrates and a desire to speed up the coatings process.[8] The global coatings market for automobiles was estimated to be $18.59 billion in 2014 with projected combined annual growth rate of 5.1% through 2022.[9]

It is used in a number of manufacturing processes as a high value specialty chemical including the electronics industry, flavors and fragrances industry, specialty solvents, polymer crosslinking, and pharmaceutical industry. In 2004, annual global production of malonic acid and related diesters was over 20,000 metric tons.[10] Potential growth of these markets could result from advances in industrial biotechnology that seeks to displace petroleum-based chemicals in industrial applications.

Malonic acid was listed as one of the top 30 chemicals to be produced from biomass by the US Department of Energy.[11]

In food and drug applications, malonic acid can be used to control acidity, either as an excipient in pharmaceutical formulation or natural preservative additive for foods.

Malonic acid is used as a building block chemical to produce numerous valuable compounds,[12] including the flavor and fragrance compounds gamma-nonalactone, cinnamic acid, and the pharmaceutical compound valproate.

Malonic acid (up to 37.5% w/w) has been used to cross-link corn and potato starches to produce a biodegradable thermoplastic; the process is performed in water using non-toxic catalysts.[13][14] Starch-based polymers comprised 38% of the global biodegradable polymers market in 2014 with food packaging, foam packaging, and compost bags as the largest end-use segments.[15]

Eastman Kodak company and others use malonic acid and derivatives as a surgical adhesive.[16]

References

  1. 1 2 pKa Data Compiled by R. Williams (pdf; 77 kB)
  2. Stark, J.B. (1950). "Composition of Sugar Beet Liquors". Industrial and Engineering Chemistry. doi:10.1021/ie50495a018.
  3. Pardee, Arthur B.; Potter, Van R. (26 October 1948). "Malonate Inhibition of Oxidations in the Krebs Tricarboxylic Acid Cycle" (PDF). Journal of Biological Chemistry (178): 241–250. Retrieved 5 June 2015.
  4. Nathan Weiner. "Malonic acid". Org. Synth.; Coll. Vol., 2, p. 376
  5. Production of malonic acid, retrieved 2015-12-11
  6. See:
  7. See:
    • Recombinant host cells for the production of malonate. PCT/US2013/029441 2012.
  8. Fäcke, T., Subramanian R., Dvorchak, M., Feng, S. Diethylmalonate Blocked Isocyanates As Crosslinkers For Low Temperature Cure Powder Coatings. 2004 International Waterborne, High-Solids, and Powder Coatings Symposium.
  9. James, S. Global Automotive Coatings Market. 2015 Grand View Research Market Report
  10. "Malonic acid diesters" (PDF). Inchem. UNEP Publications.
  11. Werpy, T., Petersen, G. Top Value Added Chemicals from Biomass. 2004 US Department of Energy.
  12. Hildbrand, S.; Pollak, P. Malonic Acid & Derivatives. March 15, 2001. Ullmann's Encyclopedia of Industrial Chemistry
  13. Netravali, A., Dastidar, T. Crosslinked native and waxy starch resin compositions and processes for their manufacture. 2013 US. Appl No. 14/418,940.
  14. Dastidar TG, Netravali AN, "'Green' crosslinking of native starches with malonic acid and their properties." Carbohydrate Polymers, 90:1620-1628 (2012)
  15. "Biodegradable Polymers," Chemical Economics Handbook (May 2015)
  16. Hawkins, G., Fassett, D. Surgical Adhesive Compositions. 1971 US Patent No. 3,591,676.
This article is issued from Wikipedia - version of the 10/18/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.