|105 mm Howitzer M3|
A M3 howitzer outside the Army Museum in Honolulu, Hawaii.
|Place of origin||United States|
|Used by||United States|
|Wars||Second World War|
|Weight||2,495 lb (1,130 kg)|
|Length||12 ft 11 in (3.94 m)|
Bore: 5 ft 6 in (1.68 m) L/16|
Overall: 6 ft 2 in (1.88 m) L/17.9
|Width||5 ft 7 in (1.70 m)|
|Height||4 ft 2 in (1.27 m)|
|Elevation||-9° to 30°|
|Rate of fire||
Burst: 4 rpm |
Sustained: 2 rpm
|Muzzle velocity||1,020 ft/s (311 m/s)|
|Maximum firing range||HE: 8,300 yd (7,600 m)|
The 105 mm Howitzer M3 was a U.S. light howitzer designed for use by airborne troops. The gun utilized the barrel of the 105 mm Howitzer M2, shortened and fitted to a slightly modified split trail carriage of the 75 mm pack howitzer.
Development and production
The process of building airborne forces in 1941 led to a requirement for an air portable 105 mm howitzer. The weapon, initially designated T7, featured a barrel from the 105mm Howitzer M2, shortened by 27 inches (690 mm) and combined with a recoil system and carriage of the 75 mm field howitzer. A prototype reached trials at Aberdeen Proving Ground in March 1942.
The howitzer was designed to fire the same ammunition as the longer M2. However, it turned out that shorter barrel resulted in incomplete burning of the propelling charge. The problem could be solved by use of faster burning powder. Otherwise the design was considered acceptable and was standardized as 105 mm Howitzer M3 on Carriage M3. The carriage was soon succeeded by the M3A1, which had trails made from thicker plate. Even stronger tubular trails were designed, but never reached production.
|Production of М3, pcs.|
Even though the M3 was not mentioned in the February 1944 Tables of Organization and Equipment (TO&E), shortly before the Normandy Airdrops some airborne divisions received a 105 mm glider field artillery battalion equipped with them as a supplement to their existing three 75 mm howitzer battalions (designated the M1A1 during World War II). 1/4 ton jeeps were used as prime movers. Later increased to four battalions, one, between 1943 and 1945, was converted to 105mm M3. The weapon was finally authorized as an option by the December 1944 TO&E and, by 1945, employed by all airborne divisions in the European Theater.
The M3 was also issued to the cannon companies of infantry regiments (six, in three platoons of two). Often the cannon companies were integrated into the division artillery. The infantry used 1½ ton cargo trucks as the prime mover.
- M3 - based on M3A1 carriage for the 75 mm field howitzer.
- M3A1 - had stronger trails, made from 1/8 inch plate instead of 3/32 inch.
- M3A2 - was fitted with shield.
There were two proposals for a self-propelled artillery piece armed with the M3. Neither reached mass production.
|105 mm HMC T82.|
- 105 mm Howitzer Motor Carriage T38 - based on the M3 halftrack, never built.
- 105 mm Howitzer Motor Carriage T82 (M3 in mount M3A1) - based on the Light Tank M5A1 chassis. Two pilots were built. The project was cancelled in June 1945 due to lack of requirement.
The gun fired semi-fixed ammunition, similar to the ammunition of the M2; it used the same projectiles and the same 105 mm Cartridge Case M14, but with different propelling charge. The latter used faster burning powder to avoid incomplete burning; it consisted of a base charge and four increments, forming five charges from 1 (the smallest) to 5 (the largest). In an emergency, gunners were authorized to fire M1 HE rounds prepared for the Howitzer M2, but only with charges from 1 to 3. M1 HE rounds for the M3 could be fired from an M2 with any charge.
|Type||Model||Weight (round/projectile)||Filler||Muzzle velocity||Range|
|HE||HE M1 Shell||18.35 kg (40 lb) / 14.97 kg (33 lb)||50/50 TNT or amatol, 2.18 kg (4 lb 13 oz)||311 m/s (1,020 ft/s)||7,585 m (8,300 yd)|
|HEAT-T||HEAT M67 Shell||16.62 kg (37 lb) / 13.25 kg (29 lb)||311 m/s (1,020 ft/s)||7,760 m (8,500 yd)|
|Smoke||WP M60 Shell||18.97 kg (42 lb) / 15.56 kg (34 lb)||White Phosphorus, 1.84 kg (4.1 lb)||311 m/s (1,020 ft/s)||7,585 m (8,300 yd)|
|Smoke||FS M60 Shell||19.65 kg (43 lb) /||Sulfur trioxide in Chlorosulfonic acid, 2.09 kg (4 lb 10 oz)|
|Smoke||HC BE M84 Shell||18.29 kg (40 lb) / 14.91 kg (33 lb)||Zinc chloride||311 m/s (1,020 ft/s)||7,585 m (8,300 yd)|
|Drill||Drill Cartridge M14||-||-|
- Zaloga - US Field Artillery of World War II, p 13-14.
- Zaloga - US Field Artillery of World War II, p 9.
- Zaloga - US Airborne Divisions in the ETO 1944-45, p 37.
- "T/O&E 7-14 Infantry Cannon Company (26 February 1944)" (PDF). Retrieved 18 June 2016.
- Zaloga - US Field Artillery of World War II, p 37.
- Pachada (19 March 2008). "Phillippine army 105mm M3 howitzer".
- Hunnicutt - Half-Track: A History of American Semi-Tracked Vehicles, p 121.
- Hunnicutt - Stuart: A History of the American Light Tank, p 332-333, 504.
- Technical Manual TM 9-1901, Artillery Ammunition, p 167-178
- Technical Manual TM 9-1904, Ammunition Inspection Guide, p 471-484.
- Hunnicutt - Stuart: A History of the American Light Tank, p 504.
|Wikimedia Commons has media related to 105mm Howitzer M3.|
- Hunnicutt, R. P. (1992). Stuart: A History of the American Light Tank. Presidio Press. ISBN 0-89141-462-2.
- Hunnicutt, R. P. (2001). Half-Track: A History of American Semi-Tracked Vehicles. Presidio Press. ISBN 0-89141-742-7.
- Zaloga, Steven J. (2007). US Field Artillery of World War II. New Vanguard 131. illustrated by Brian Delf. Osprey Publishing. ISBN 978-1-84603-061-1.
- Zaloga, Steven J. (2007). US Airborne Divisions in the ETO 1944-45. Battle Orders 25. Osprey Publishing. ISBN 9781846031182.
- Technical Manual TM 9-1326, 105 mm Howitzer M3 and Howitzer Carriages M3 and M3A1. War Department, 1944.
- Technical Manual TM 9-1901, Artillery Ammunition. War Department, 1944.
- Technical Manual TM 9-1904, Ammunition Inspection Guide. War Department, 1944.