Light plot

A light plot, lighting plot or just plot is a document similar to an architectural blueprint used specifically by theatrical lighting designers to illustrate and communicate the lighting design to the director, other designers and finally the Master Electrician and electrics crew. The light plot specifies how each lighting instrument should be hung, focused, colored, and connected. Typically the light plot is supplemented by other paperwork such as the channel hookup or instrument schedule.

Up until the development of Computer Aided Drafting (CAD) programs, light plots were hand drawn or drafted on special drafting paper. Though CAD programs and hand drafting require different techniques and methods, the information is presented and used in the same way. In order to be effective a light plot must:

Parts of a Plot

Plan View

The plan view is the primary view of the light plot and contains the most information on the lighting instruments and their locations. As per the design definition, the plan view illustrates how the venue space would appear to someone above it. It contains the relevant architectural information of the venue space including locations of walls, the floor level, the location of seats and balconies, and occasionally sight lines, as well as the location of each lighting instrument and other relevant hardware, like modular dimmer boxes. The plan must also include information on the electrical systems of the theater--the location of outlets connected to the theater's dimmers and the available lighting positions--rails, booms, side arms, and catwalks. The plan view may also contain scenic information, such as a drawing of the set. [2]

Section and Elevation View

The supplementary (and generally optional) section (side) and elevation (front) views contain much of the same information as the plan view. The section is a cutaway view of the house and stage from either the left or the right. The section line is typically the venue's center line. The elevation is a plot oriented as if viewing the stage from the audience. These supplementary views serve primarily to further illustrate relevant architectural and scenic features, including sight lines. Most commonly the section and elevation plots feature limited electrical information and are used mainly as a reference for the lighting designer or electrician to identify the purpose of each lighting fixture, especially as to how it interacts with any relevant scenic elements. The elevation and section views might also be provided to the electrics crew as a secondary reference for the positions of lighting instruments.[3]

Lighting Instruments

The instrument layer contains all the information relating to the lighting instruments. This includes:

In the past when plots were completely hand drafted, a lighting designer would sometimes plot the lighting instruments on a transparent overlay which could be placed over the plan, section and/or elevation views, therefore allowing the "blank" views (containing only architectural information) to be re-used for other lighting configurations. The advent of CAD-based lighting design has made this practice obsolete, though occasionally useful.

The information contained in the lighting instruments section should follow consistent, easy to understand rules which are explained in the key, expediting the electric crew's job of hanging and focusing the fixtures. [4]

Title Block

The title block contains several pieces of key information on the production including the show title, date, and venue name, as well as the names of the performance's lighting designer and director. The title block also contains the legend, which identifies all of the drafting symbols used in the plot, as well as any special notes

Other important lighting paperwork

In addition to the light plot there are a number of other important pieces of paperwork (i.e. Dimmer hookup, Instrument Schedule, and Magic Sheet) in a complete lighting design. As each part of the lighting design is relevant only to a specific group of technicians, the entire design is generally provided only to the director and master electrician.

References

  1. Moody, James L.: "Concert Lighting", page 29-51. Focal Press, 1998
  2. Lounsbury, Warren C., Norman C. Boulanger: "Theater Backstage from A to Z", page 147. University of Washington Press, 1999.
  3. Lounsbury, Warren C., Norman C. Boulanger: "Theater Backstage from A to Z", page 176 & 61. University of Washington Press, 1999.
  4. Moody, James L.: "Concert Lighting", page 48-49. Focal Press, 1998
This article is issued from Wikipedia - version of the 10/31/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.