Leech (sail)

Edges of a quadrilateral fore-and-aft sail: 1. Head. 2. Luff. 3. Foot. 4. Leech

The leech refers to the trailing edge of a fore-and-aft rigged sail or to the side edges of a square-rigged sail or spinnaker, either of which may be the trailing edge, depending on which tack the vessel is on.[1]

Edges of sails

Main article: Parts of a sail

The other edges of a sail are:

Characteristics

The parts of a square sail.

Fore-and-aft sails: On fore-and-aft sails, including jibs and mainsails, leech tension affects the shape of the sail and is primarily controlled with the downward component of tension on the sheet, which is attached to the clew of a jib or the boom of a mainsail. Off the wind, less tension increases the curvature of the leech and consequently, the sail. The tightness of a jib leech is also affected by the angle at which the jib sheet leads to the deck—further aft creates a looser leech. On mainsails, tension on the halyard, boom vang and sheet can all affect leech tension and, consequently, sail shape. Downward tension on the boom vang helps avoid mainsail twist to create a similar curvature up the height of the sail.[4]

Symmetrical sails: On symmetrical sails, including square sails and spinnakers, both side edges are leeches. However, in use the windward leech of a symmetrical sail may be referred to as the luff.[5][1]

See also

References

  1. 1 2 King, Dean (2000). A Sea of Words (3 ed.). New York: Henry Holt. p. 271. ISBN 978-0-8050-6615-9.
  2. Jobson, Gary (2008). Sailing Fundamentals (Revised ed.). New York: Simon and Schuster. p. 208. ISBN 1439136785.
  3. 1 2 3 Jobson, Gary (2008). Sailing Fundamentals (Revised ed.). New York: Simon and Schuster. p. 21. ISBN 1439136785.
  4. Colgate, Stephen (1990). Steve Colgate on Sailing. New York: W. W. Norton & Company. pp. 37–38. ISBN 0393029034.
  5. King, p.283

Further reading

This article is issued from Wikipedia - version of the 11/21/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.