Honda RA300

Honda RA300
Category Formula One
Constructor Honda R&D
Designer(s) Eric Broadley (Lola Cars)
John Surtees (Honda)
Yoshio Nakamura (Honda)
Shoichi Sano (Honda)
Predecessor RA273
Successor RA301
Technical specifications
Chassis Aluminium monocoque
Engine Honda RA273E, 2991cc V12 naturally aspirated Mid-engined, longitudinally mounted
Transmission Honda 5-speed manual
Fuel BP/Shell
Tyres Firestone
Competition history
Notable entrants Honda Racing
Notable drivers United Kingdom John Surtees
Debut 1967 Italian Grand Prix,
Monza.
RacesWinsPolesF.Laps
4100
Constructors' Championships 0
Drivers' Championships 0
n.b. Unless otherwise stated, all data refer to
Formula One World Championship Grands Prix only.

The Honda RA300 was a Formula One racing car produced by Honda Racing, and introduced halfway through the 1967 Formula One season. It retained the same V12 engine as the preceding RA273 car, but the chassis was designed by Lola's Eric Broadley and based on a previous Lola Indianapolis 500 car, the T90. Lola Cars called the RA300 the "T130" This collaboration resulted in the machine being quickly dubbed the Hondola by the motorsports press.

Rear view showing "waterfall" exhaust array.

Broadley's chassis was much lighter and sweeter handling than the previous in-house design. The car initially performed impressively, winning in its first ever World Championship race at the 1967 Italian Grand Prix. Driver John Surtees took the lead from Jim Clark's Lotus and Jack Brabham's Brabham on the final lap, after Clark ran out of fuel and Brabham ran wide. However, the RA300 flattered to deceive, and this would turn out to be the only lap that an RA300 would lead, and it never again took a World Championship victory. It remains the only F1 car ever to take its single victory in its very first Grand Prix, and on the only lap it would ever lead.

The remainder of the 1967 season saw Surtees collect only three more points, with a fourth place at the 1967 Mexican Grand Prix. The car was superseded in the following season by the Honda RA301, a design closely based on the RA300. However, this did not improve Honda's results, Surtees only managing to finish four of the season's twelve events.

On display at the IAA exhibition in Frankfurt, 2007.

The 48-valve V12 Honda first appeared at the 1966 Italian GP driven by Richie Ginther (USA). In spite of weighing 740 kg (dry) it was capable of spinning the rear tyres at 100 mph in third gear. With cylinder dimensions of 78.0 x 52.2 mm 2,993.17 cc, a target of 400-440 bhp @ 12,000 rpm was quoted. The engine used by John Surtees at the 1967 Italian GP was quoted by Motoring News as developing only 396 bhp, but with improved torque and response. The vehicle weight excess over the 500 kg minimum had been approximately halved.


Formula One World Championship results

(key) (results in bold indicate pole position; results in italics indicate fastest lap)

Year Entrant Engine Tyres Driver 1 2 3 4 5 6 7 8 9 10 11 12 Points WCC
1967 Honda Racing Honda V12 F RSA MON NED BEL FRA GBR GER CAN ITA USA MEX 201 4th
John Surtees 1 Ret 4
1968 Honda Racing Honda V12 F RSA ESP MON BEL NED FRA GBR GER ITA CAN USA MEX 142 6th
John Surtees 8

1 Includes 8 points scored by Honda RA273 entries.
2 All 14 points scored by Honda RA301 entries.

Wikimedia Commons has media related to Honda RA300.

{{main other|[[Category:1968 Formula One season cars}}]]

This article is issued from Wikipedia - version of the 8/18/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.