Holden 48-215

Holden 48-215
Overview
Manufacturer Holden (General Motors)
Also called Holden FX (unofficial)
Production 1948–1953
Assembly Pagewood, New South Wales[1]
Fortitude Valley, Queensland[1]
Birkenhead, South Australia[1]
Mosman Park, Western Australia[1]
Woodville, South Australia[1]
Fishermen's Bend, Victoria
Body and chassis
Class Mid-size
Body style 4-door sedan (48-215)
2-door coupe utility (50-2106)
Layout Front-engine, rear-wheel drive
Powertrain
Engine 132.5 cu in (2,171 cc) I6
Transmission 3-speed manual
Dimensions
Wheelbase 103 in (2,620 mm)
Length 172 in (4,370 mm)
Width 66.9 in (1,699 mm)
Height 61.8 in (1,570 mm)
Curb weight 2,230 lb (1,010 kg)
Chronology
Successor Holden FJ

The Holden 48-215 is a mid-size, sedan that was produced by the Australian automaker Holden between November 1948 and October 1953. The 48-215 was the first model from General Motors in Australia to bear the Holden name.[2] In mainstream parlance, the official name of "Holden 48-215" was eschewed in favour of the shortened "Holden" designation. Following the replacement of the first Holden, the 48-215 gained the unofficial nickname of Holden FX. This arose as the replacement models were labeled FJ, FE, FC, et cetera, and it was therefore assumed by the general public that 48-215 must have been F-something as well, so the title FX came into use in used car advertisements, the "X" standing for the unknown.[3]

The design was originally penned in the United States by Chevrolet,[4] but was not used because it was deemed too small for the U.S. market as it developed after the war. Instead the design became the basis of only the 48-215 model. Its American origins are quite apparent, as it closely resembles Chevrolets of the period that did make it to production, particularly the Fleetline Aerosedan and the second generation Deluxe. Development of the 48-215 began in 1944.

Five prototypes

Holden 48-215 sedan

Three prototypes were built by hand in 1946 by American and Australian engineers at the General Motors workshop in Detroit. Months of durability and performance testing were undergone in the US before the three prototypes were shipped to Australia. Prototype number one was first registered (as a Chevrolet) in Victoria as JP-480 on 12 February 1947.[5] The only survivor of the prototypes, it is part of the National Museum of Australia collection.

A further two prototypes were built in Australia; all five prototypes were registered as Chevrolets. Only two were used for photographic purposes. They were:[5]

In the absence of an established supplier base in Australia for auto-making, new forging facilities had to be set up for producing crankshafts and a new foundry was set up for major castings.[7] In order to hasten the project to production some simplifications were incorporated.[7] There were no direction indicators, there was no provision for heating or demisting, and at the rear there was only a single, centrally positioned, tail lamp.[7] Because of the mild climate in most of the populated areas of the country, it was found possible to save weight and cost by using a relatively small 6-volt 11-plate battery.[7] Interior trim was minimised: weight reduction was pursued "with great vigour" and, in view of the 2,247 lb (1,019 kg) weight in "running trim", a success.[7]

Ten pilot cars

1948 timeline

Production overview

All four Holden colours were represented:[5]

Pilot car No. Colour Serial No. Engine No. Registration No.
1 Gawler Cream (Body No. six) 8-1001-M 1001 MG-501
2 Black 8-1002-M 1002 MG-502
3 Black 8-1003-M 1003 MG-503
4 Black 8-1004-M 1004 MG-504
5 Black 8-1005-M 1005 MG-505
6 Seine Blue 8-1006-M 1006 MG-506
7 Convoy Grey 8-1007-M 1007 MG-507
8 Black 8-1008-M 1008 MG-508
9 Black 8-1009-M 1009 MG-509
10 Black 8-1010-M 1010 MG-510

These ten cars were used for testing. Three of them went to the Engineering Department, five went to Manufacturing, one went to the General Sales Manager, and one went to the managing director, H.E. Bettle.[5]

Volume production

When all departments were satisfied with the car, volume production began. The race was now on to ensure Holden dealers in all states had cars on their showroom floors before unveiling day. Black bodies dominated the early roll-out but GMH made sure that each capital city also received examples of cream, blue, and grey. Ultimately, 68 Holdens were distributed to the capital cities before unveiling day.[8]

On Sunday, 21 November, an Open Day was held to exhibit the entire factory (including the high-security design rooms) and the car itself. But this special preview was not for the public or the dealers—it was for the Fishermen's Bend employees and their families (GMH estimated that 12,000 guests attended). There were partly assembled cars at various stages along the assembly line as well as finished cars for the guests to inspect.[8]

The official launch for Victorian dealers was held at the Oriental Hotel in Melbourne on Friday, 26 November.[8]

Unveiling

The official unveiling by Prime Minister Ben Chifley commenced at 2:30 pm on Monday, 29 November 1948, in the Fishermen's Bend Social Hall. The 400 guests applauded when silver curtains parted to reveal a cream Holden, in a black velvet setting and sparkling under spotlights, as an orchestra played Brahms' Waltz in A-flat. The celebrations at the plant were attended by 1,200 official guests.[8] The Holden was released for sale to the public at Port Melbourne, Victoria. The car was marketed simply as the Holden, without a model name.[9] It had a 132.5 cu in (2,171 cc) cast-iron straight six engine which produced 60 hp (45 kW), connected to a three-speed manual transmission. It managed the 0–60 mph (0–97 km/h) sprint in 18.7 or 27.7 seconds.[4][10] Sources differ. It also had a dust proof body, and a small 37 ft turning circle.[10]

The 50-2106 coupe utility, based on the 48-215 sedan, was released in January 1951[11] and in July 1953 the "Holden Business" sedan, essentially a taxi version of the 48-215, was added to the range.[12] The 48-215 and 50-2106 models were replaced by the Holden FJ series in 1953.[13]

References

  1. 1 2 3 4 5 Ed's Eh Premier Build. Retrieved 23 August 2011
  2. Davis, Tony; Kennedy, Alistair; Kennedy, Ewan (February 2007). "The Holden Heritage - 13th Edition (Part One)". GM Holden. pp. 38–39. Archived from the original (PDF) on 15 September 2010.
  3. "HOLDEN - The Classic Models" by Ewan Kennedy with the Introduction by Peter Brock; From a paragraph on Page 1. First Published in 1997.
  4. 1 2 Willson, Quentin (1995). The Ultimate Classic Car Book. DK Publishing, Inc. ISBN 0-7894-0159-2.
  5. 1 2 3 4 5 Magazine "Restored Cars Australia" Number 106 Sept-Oct 1994, Page 14, article "THE 48-215 HOLDEN PART ONE"
  6. Cockington, James (23 October 2013). "Australia's first Holden offered for sale at $1m". The Sydney Morning Herald. Retrieved 6 December 2013.
  7. 1 2 3 4 5 "Holden Saloon (road test)". Autocar. 2 December 1948.
  8. 1 2 3 4 Magazine "Restored Cars Australia" Number 107 Nov-Dec 1994, Page 16, article "THE 48-215 HOLDEN PART TWO"
  9. Terry Bebbington & Michel A. Malk, 45 years of Holden, 1994, page 14
  10. 1 2 "Holden 48/215 FX Technical Specifications". Unique Cars & Parts. Retrieved 17 October 2011.
  11. The Holden Heritage, Eight Edition
  12. Aussie Cars (1987)
  13. Norm Darwin, 100 Years of GM in Australia, 2002, page 225

External links

This article is issued from Wikipedia - version of the 9/4/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.