Frederick Howard Buller

Frederick Howard Buller
Born (1914-05-25)25 May 1914
Vancouver, British Columbia, Canada
Died June 7, 1994(1994-06-07) (aged 80)
White Rock, British Columbia, Canada
Occupation Aeronautical engineer
Spouse(s) Betty (Tillard) Buller
Children Jocelyn (Buller) Gabbert, Christopher Buller

Frederick Howard Buller, an aeronautical engineer, was born in Vancouver, British Columbia on May 25, 1914.

Early career

Buller began with an interest in sailboat design. He attended University of British Columbia from 1932 to 1935. Thereafter, he spent several years studying naval architecture in Glasgow, Scotland. In 1937, he switched his focus to aeronautical engineering, moving to Oakland, California to enroll in the Boeing School of Aeronautics. In 1939, he moved to Edmonton, Alberta and began working in the field with Aircraft Repair (later Northwest Industries). In 1943, he relocated to London, Ontario, assisting in the war efforts at Central Aircraft, a subsidiary of de Havilland. In September 1944, he settled in Downsview at de Havilland Aircraft of Canada Ltd (DHC), where he would remain for 35 years.

Later career

At de Havilland, Buller, who became its Chief Designer, worked on the designs of a number of notable aircraft, including the Chipmunk and the de Havilland STOL Beaver. The Chipmunk was extensively used in training RAF and RCAF pilots. The Beaver, registered by then de Havilland president P.C. Garratt as ‘CF-FHB’ in honor of its designer, is on display in the Canadian National Aviation Museum in Ottawa. Buller was also involved in or oversaw the design of the DHC-3 Otter (1951), DHC-4 Caribou (1958), DHC-5 Buffalo (1964), DHC-6 Twin Otter (1965), and DHC-7 Dash 7 (1975). He was a consultant on the HMCS Bras D’or, a hydrofoil commissioned by the Royal Canadian Navy.

A noted competitor in the 14-footer class (precursor to the International 14) at the Royal Canadian Yacht Club in Toronto and internationally, Buller initially expressed his interest in sailboat design through innovative customization of hulls designed by others (notably Charlie Bourke); his execution of a gybing centreboard was regarded as one of the first truly effective examples. In the early fifties, his Buller I and Buller II advanced both the general design in the class and its use of materials, as both boats were moulded in a material then new, fibreglass. Buller was also credited with bringing the tell-tale, a strip of string or cloth attached to a wing to test its aerodynamic qualities, over to the sailing world. A significant innovation in sailing at the time, sail tell-tales are now common.[1]

In 1955, Buller became one of the founding members, and a Fellow, of the Canadian Aeronautics and Space Institute. Frederick Buller died on June 7, 1994 at White Rock, British Columbia.

Honors

In 1971, the Canadian Aeronautics and Space Institute awarded Buller its McCurdy Award for his major contributions to the de Havilland family of STOL aircraft. The Engineering Centennial Board named the DHC-2 Beaver as among the ten best engineering accomplishments in Canada in 1987. In 1997 he was inducted into the de Havilland Hall of Fame, and in 1999 he was inducted into Canada’s Aviation Hall of Fame.

For his achievements on the racecourse and as a designer, Buller was in 2013 posthumously inducted into the Canadian International Fourteen Foot Dinghy Hall of Fame.[2]

References

  1. [Continuous Evolution – The Continuing Journey of the Canadian International 14, Parts I, II, Rob Mazza, Kwasind, Aug. 2013, pp 12-23, Kwasind, Sept 2013, pp 12-22]
  2. http://i14.ca/news.htm A list of recent inductees.

External links

This article is issued from Wikipedia - version of the 4/19/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.