Fokker-Leimberger

Fokker-Leimberger
Type Multi-barelled Machine gun
Place of origin German Empire
Service history
In service Trials only
Production history
Designer A.H.G. Fokker & ? Leimberger
Designed 1916
Specifications
Cartridge 8x57mm IS
Barrels 12
Rate of fire (claimed) 7200+RPM
Feed system Belt
Sights Iron

The Fokker-Leimberger was an externally powered, 12-barrel rifle-caliber rotary cannon developed in Germany during the First World War. The action of the Fokker-Leimberger differed from that of a Gatling in that it employed a rotary split-breech design,[1] also known as a "nutcracker".[2]

Fokker claimed the gun achieved over 7200 rpm, although this may be an exaggeration.[2][1] Failures during the war were attributed to the poor quality of German wartime ammunition,[1] although the type of breech employed had ruptured-case problems in a British 1950s experimental weapon.[2] Fokker continued to experiment with this type of breech after his post-war move to the United States. A different Fokker prototype in a US museum attests to the failure of this line of development.[3]

Design

The Fokker-Leimberger used a rotary split-breech design known as the "nutcracker". In this design a temporary chamber is formed by joining the two cavities of touching, counter-rotating sprockets.[2] The simplicity of the design was appealing, particularly because it contained no major parts using a reciprocating motion, like the breechblock used in many other automatic weapons. Ignoring the various material stresses, the maximum rate of fire was thus theoretically limited only by the time needed to complete the burning of the propellant from each cartridge.[1] Anthony Williams commented on this design that: "Fokker claimed that 7,200 rpm was achieved, but knowing Fokker, there is some reason to assume that that may have been slightly exaggerated. Problems occurred, of course, with cases bursting on the seam between the two cylinders."[2] Another "Fokker Split Breech Rotary Machine Gun, ca. 1930" was donated by Val Forgett to Kentucky Military Treasures in 1977; according to the museum record it "proved unsuccessful because of its inability to seal breech cylinders".[3][4] The British also experimented with this type of breech for aircraft guns in the 1950s, but abandoned it.[5] This type of breech has only been used successfully in low-pressure applications, such as the Mk 18 Mod 0 grenade launcher.[2]

The Fokker-Leimberger used percussion ignition with the firing pins mounted on a swashplate. No extractor was employed; the spent cases were simply left on the outgoing belt. The gun would have had to be pre-rotated in flight in order to ensure that when the trigger was pulled it would have fired at its maximum speed at once. Similarly to the Gatling designs, the use of multiple barrels enabled air cooling of each barrel in the time between successive shots were fired from the same barrel.[1]

History

The development program that lead to the Fokker-Leimberger prototype was apparently initiated by the Idflieg through a circular sent to German firearms manufacturers on 16 August 1916. This document, authored by major Wilhelm Siegert requested lightweight designs with a high rate of fire for use in German aircraft. It also suggested that external power sources be used for the automatic firing, like the aircraft engine itself or electrical power. The circular was answered by designs from various German companies. Besides Fokker, Siemens, Autogen and Szakats-Gotha also submitted proposals. None of these entered mass production before the war ended, although the Siemens prototype was used on the Western front and claimed one aerial victory.[1]

As with his other machine-gun-related designs, Fokker collaborated with Heinrich W. Lübbe and with another engineer named Leimberger for this project. Initially they developed a simple adaptation of the Maxim action (itself widely used in Germany in the MG 08), driven by a crank from the engine. Their more ambitious project however employed the yet unproven split-breech action, in a 12-barrel design.[1] The idea for this type of breech was not entirely new, having been patented in the US as early as 1861 (USPTO #32,316).[2] (Other US patents from the early 1920s indicate there was renewed experimentation with this design in the US as well.[6][7])

No record survives for the gun's ballistic performance, beside the claim for over 7,200 rounds per minute. However, problems with ammunition were recorded, as "only too often the cases tore open in the gun".[1] After the war, a Fokker-Leimberger prototype was claimed as personal property by A. H. G. Fokker, and he took it with him when he emigrated to the US in 1922.[1] The donation record for the exemplar now found at the Kentucky Historical Society states that all other exemplars were destroyed.[3]

See also

References

  1. 1 2 3 4 5 6 7 8 9 Weyl, "Motor Guns-A flashback to 1914-18" Flight, 8 March 1957, pages 313-314
  2. 1 2 3 4 5 6 7 Anthony G Williams (8 November 2005), SPLIT BREECH GUNS: THE NUTCRACKER AND THE 40MM MK 18
  3. 1 2 3 ""Fokker Split Breech Rotary Machine Gun, ca. 1930"" (PDF). lrc.ky.gov / Kentucky Historical Society. "This test model of a rotary machine gun built for Dutch designer Anthony Fokker proved unsuccessful because of its inability to seal breech cylinders. Although an incomplete specimen, it is the only known extant example of the Fokker Split Breech Rotary Machine Gun. [...] Due to the unsatisfactory test results of this prototype, the project was abandoned. Other prototypes were destroyed. Donated by Val Forgett, 1977.08.01
  4. http://kyhistory.pastperfect-online.com/35577cgi/mweb.exe?request=record&id=B54DA4F4-8851-4F4D-ADC2-453181649430&type=101
  5. Anthony G. Williams; Emmanuel Gustin (2005). Flying Guns of the Modern Era. Crowood. p. 55. ISBN 978-1-86126-655-2.
  6. http://www.google.com/patents/US1328230
  7. http://www.google.com/patents/US1399119

See also

This article is issued from Wikipedia - version of the 10/9/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.