FJG RAM

FJG RAM, short for Floating Junction Gate Random Access Memory, is a type of computer memory invented by Oriental Semiconductor Co., Ltd.

The FJG RAM has an ultra-compact cell area of 4F2 (F refers to feature size) and a capacitorless cell configuration. It is made without exotic process steps, materials or new process tools, and the process for making the device is available from all existing DRAM fabs. Due to the absence of a capacitor, the FJG cell process is more compatible with logic process, allowing its use not only in standalone DRAM applications but also in embedded-DRAM applications. Other properties include non-destructive-read and the possibility for DRAM designers to use shared sense-amplifiers to reduce the complexity of periphery circuits.

As of April 2016 there is little evidence of ongoing development or near-term commercialization efforts.

Device configuration and operation

Fig.1.Simulation picture of an FJG memory cell.

Device Structure
Fig.1 and Fig.2 show simulated structure picture and the equivalent circuit schematic of the FJG device, respectively. An FJG device consists of following parts as shown in Fig.1:

  1. Source Region
  2. Drain Region
  3. Control Gate
  4. Quasi-Floating Gate
  5. Substrate
  6. pn Diode


Fig.2.An equivalent circuit schematic of an FJG memory cell.

Basic Operation
As shown in Fig.2, the FJG device generally consists of one floating gate NMOS and one MOS gated diode. The floating gate NMOS has different threshold voltages at different logic states. By charging or discharging the floating gate via the current path through the gated diode, the threshold voltage of the floating gate NMOS is changed. Since the floating gate is connected to a p-n junction, this cell is called a "floating junction gate (FJG)" cell. When reading the cell, with the same voltage conditions on the control gate, the NMOS has different sense current at different logic states. The sense current can then be amplified by a sense amplifier. Thus, the state of the cell can be determined.


Fig.3.Write logic "1" and "0" into an FJG cell
Fig.4.Transient Characteristics of an FJG cell

Electrical Characteristic

Program and Read Operations

Writing logic "1" and "0" is done by charging and discharging the floating gate in an FJG cell. It is done through current flowing through the pn diode under different voltage stress conditions at different contact nodes. When charging the floating gate, the pn diode is reverse biased, causing large band bending at the floating gate/channel junction. Band-to-Band tunneling will occur under such condition causing electrons tunnel from the floating gate to the channel(Fig.3(a)). Discharging the floating gate is realized by forward biasing the pn diode and draining the charges out of the floating gate(Fig.3(b)). Both processes can be done within a few nano seconds, which enables ultra high speed operation. Fig. 4 illustrates the transient characterization of the read and write operations of an FJG device, wherein the write logic "1" and "0" operations take 5 ns including 1ns rising/falling edge of the signal pulse. It can be seen that the read logic "1" current is as high as 20μA after the write logic "1" operation while the read logic "0" current is less than 1μA after the write "0" operation. The write "1" operation can be even faster with an increased VD-S.

Fig.5.The difference of Vfg between “1” and “0” cells after a certain read time.

Non-destructive read: Fig.5 shows the dependence of a delta-shaped Vfg on the read time; the delta Vfg represents the difference in Vfg between identical memory cells in “1” versus “0” states. It can be seen that the read-operation of the FJG cell is quasi non-destructive. The non-destructive read operation endurance can be longer than 1 ms at Vcg=1.6 V.

See also

External links

This article is issued from Wikipedia - version of the 8/5/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.