Engineering disasters

The I-35W Mississippi River bridge collapse in August 2007 provides an iconic example of an engineering disaster.

Shortcuts in engineering design can lead to engineering disasters. Engineering is the science and technology used to meet the needs and demands of society.[1] These demands include buildings, aircraft, vessels, and computer software. In order to meet society’s demands, the creation of newer technology and infrastructure must be met efficiently and cost-effectively. To accomplish this, managers and engineers have to have a mutual approach to the specified demand at hand. This can lead to shortcuts in engineering design to reduce costs of construction and fabrication. Occasionally, these shortcuts can lead to unexpected design failures.

Importance of safety

In the field of engineering, the importance of safety is emphasized. Learning from past engineering failures and infamous disasters such as the Challenger explosion brings the sense of reality to what can happen when appropriate safety precautions are not taken. Safety tests such as tensile testing, finite element analysis (FEA), and failure theories help provide information to design engineers about what maximum forces and stresses can be applied to a certain region of a design. These precautionary measures help prevent failures due to overloading and deformation.[2]

Background of failure

Failure occurs when a structure or device has been used past the limits of design that inhibits proper function.[3] If a structure is designed to only support a certain amount of stress, strain, or loading and the user applies greater amounts, the structure will begin to deform and eventually fail. Several factors contribute to failure including a flawed design, improper use, financial costs, and miscommunication.

Failure due to static loading

Stress–strain curve showing typical yield behavior for ductile metals. Stress (σ) is shown as a function of strain (ϵ). Stress and strain are correlated through Young's Modulus: σ=Eϵ where E is the slope of the linear section of the plot.

Static loading is when a force is applied slowly to an object or structure. Static load tests such as tensile testing, bending tests, and torsion tests help determine the maximum loads that a design can withstand without permanent deformation or failure. Tensile testing is common when calculating a stress-strain curve which can determine the yield strength and ultimate strength of a specific test specimen.

Tensile testing on a composite specimen

The specimen is stretched slowly in tension until it breaks, while the load and the distance across the gage length are continuously monitored. A sample subjected to a tensile test can typically withstand stresses higher than its yield stress without breaking. At a certain point, however, the sample will break into two pieces. This happens because the microscopic cracks that resulted from yielding will spread to large scales. The stress at the point of complete breakage is called a material’s ultimate tensile strength.[4] The result is a stress-strain curve of the material's behavior under static loading. Through this tensile testing, the yield strength is found at the point where the material begins to yield more readily to the applied stress, and its rate of deformation increases.[5]

Failure due to fatigue

When a material undergoes permanent deformation from exposure to radical temperatures or constant loading, the functionality of the material can become impaired.[6][7] This time–dependent plastic distortion of material is known as creep. Stress and temperature are both major factors of the rate of creep. In order for a design to be considered safe, the deformation due to creep must be much less than the strain at which failure occurs. Once the static loading causes the specimen to surpass this point the specimen will begin permanent, or plastic, deformation.[7]

In mechanical design, most failures are due to time-varying, or dynamic, loads that are applied to a system. This phenomena is known as fatigue failure. Fatigue is known as the weakness in a material due to variations of stress that are repeatedly applied to said material.[8] For example, when stretching a rubber band to a certain length without breaking it (i.e. not surpassing the yield stress of the rubber band) the rubber band will return to its original form after release; however, repeatedly stretching the rubber band with the same amount of force thousands of times would create micro-cracks in the band which would lead to the rubber band being snapped. The same principle is applied to mechanical materials such as metals.[5]

Fatigue failure always begins at a crack that may form over time or due to the manufacturing process used. The three stages of fatigue failure are:

Note that fatigue does not imply that the strength of the material is lessened after failure. This notion was originally referred to a material becoming "tired" after cyclic loading.[5]

Failure due to miscommunication

Engineering is a precise discipline and in order to be precise, communication among project developers is pertinent for a successful product. There are several forms of miscommunication that can lead to a flawed design in a system. There are various fields of engineering that have to intercommunicate when working toward a mutual goal. These fields include civil, electrical, mechanical, industrial, chemical, biological, and environmental engineering. When creating a modern automobile, electrical engineers, mechanical engineers, and environmental engineers are required to work together to produce a fuel-efficient, durable product for consumers. If engineers do not adequately communicate among one another, a potential design could have flaws and be unsafe for consumer purchase. Engineering disasters can be a result of such miscommunication. Such disasters include the 2005 levee failures in Greater New Orleans, Louisiana during Hurricane Katrina, the Space Shuttle Columbia disaster, and the Hyatt Regency walkway collapse.[9][10][11]

Infamous disasters in engineering

Engineering products and inventions are utilized everyday including computers, microwaves, and elevators. A broken microwave can have limited consequences; however, when larger projects such as infrastructures and airplanes fail, multiple people can be affected which leads to an engineering disaster. A disaster is defined as a calamity that results in significant damage which may include the loss of life.[12] Large-scale engineering disasters are recorded in the history books. Just like any other mistake, these disasters become reminders and guidelines of how to improve and not repeat the same mistakes. In-depth observations and post-disaster analysis have been documented to a large extent to help prevent similar disasters from occurring.

Infrastructure

Tay Bridge Disaster (1879)

Main article: Tay Bridge disaster

Tacoma Narrows Bridge collapse (1940)

Hyatt Regency Hotel walkway collapse (1981)

Depiction of the modified design made by the fabricator

On the night of July 17, 1981, in Kansas City, Missouri, United States, two suspended walkways of the Hyatt Regency Hotel collapsed, killing 114 people and injuring 200 more. During this calamity, the hotel was hosting a dance competition. There were numerous competition attendants and observers standing and dancing on the suspended walkways when connections supporting the ceiling rods that hoisted both the second and fourth floor walkways across the atrium failed and collapsed onto the crowded first floor atrium below.[13]

During investigation after the walkway collapse, architectural engineer Wayne G. Lischka noticed a substantial alteration of the original design. The fabricator constructed a double-rod support system rather than the originally designed single-rod system without approval of the engineering design team. In doing so, the created support beams doubled the loading on the connector which resulted in the failure of the walkway. It was documented that even the single-rod system would have barely supported the expected load and would not have met Kansas City Building Code standards.[13]

The final analysis of the damage had several conclusions reported including:

Aeronautics

Challenger explosion (1986)

The Space Shuttle Challenger disaster occurred on January 28, 1986, when the NASA Space Shuttle orbiter Challenger (OV-099) (mission STS-51-L) broke apart 73 seconds into its flight, leading to the deaths of its seven crew members. Disintegration of the vehicle began after an O-ring seal in its right solid rocket booster (SRB) failed at liftoff.

Columbia disaster (2003)

Main article: Columbia disaster
The crew of the STS-107 mission.

The Space Shuttle Columbia disaster occurred on February 1, 2003, while reentering Earth's atmosphere over Louisiana and Texas. The shuttle unexpectedly disintegrated, resulting in the death of all seven astronauts on board. The cause was later discovered to be damage to thermal shielding tiles from impact with a falling piece of foam insulation of an external tank during launch. It was the seventh known instance of this particular piece breaking free during launch.[14] As the shuttle re-entered Earth's atmosphere at a speed of Mach 23 (23 times faster than the speed of sound), the wing experienced temperatures of 2,800 °F (1,540 °C). The damage from the insulation strike experienced during launch proved fatal as the shuttle disintegrated during the mission return.[11] NASA's investigation team found melted aluminum on the thermal tiles and inside edges of the left wing of the spacecraft, supporting the notion that the Columbia's destruction was due to hot gases that penetrated the damaged spot on the wing.[15]

Roger L.M. Dunbar of New York University and Raghu Garud of Pennsylvania State University procured a case description of what missteps NASA had taken that led to the Columbia spacecraft catastrophe. Mission control deemed that foam shedding was a not a safety factor prior to launch, believed damage of the shuttle panels were not a significant issue which in-turn delayed analysis on damages as of January 17, 2003, and denied mission action request between January 18 and 19. It was not until January 24, 2003, that mission control had classified the damage as a problematic issue. These missteps in communication between mission control and the debris assessment team inhibited a proper examination of the damages to the spacecraft.[11]

Vessels

Liberty ships in WWII

Main article: Liberty ship

Early Liberty ships suffered hull and deck cracks, and a few were lost to such structural defects. During World War II, there were nearly 1,500 instances of significant brittle fractures. Three of the 2,710 Liberties built, broke in half without warning. In cold temperatures the steel hulls cracked, resulting in later ships being constructed using more suitable steel.

Steamboat Sultana (1865)

Main article: Sultana (steamboat)
Depiction of the steamboat Sultana disaster

On the night of April 26, 1865, the passenger steamboat Sultana exploded on the Mississippi River seven miles north of Memphis, Tennessee. This maritime disaster is categorized as the worst in United States history. The explosion resulted in the loss of 1,547 lives, surpassing the total number of deaths caused by the sinking of the Titanic. The Sultana was overcrowded due to a soldier prisoner exchange towards the end of the United States Civil War. The overcrowding contributed significantly to the high death toll. Another reason for the high number of deaths is that the steamer was made mostly of wood, which was documented to have been completely engulfed in flames approximately seven minutes after the explosion. The explosion happened around midnight which was when the Mississippi River was at flood stage. It was documented that the single metal lifeboat on board the Sultana was thrown from the upperdeck landing on several people swimming from the steamer resulting in further deaths.[16]

The disaster was believed to be the result of a repaired boiler explosion that led to the explosion of two of the three other boilers. The boiler had been previously found to have had a leak and was improperly repaired by boilermaker R.G. Taylor due to orders from Captain J. Cass Mason because of time constraints in Vicksburg, Mississippi. While chief engineer Nathan Wintringer approved the repaired boiler, Taylor stated that the boiler could not be considered safe since the boiler appeared to be burned from being worked on with too little water.[16] Traveling along the Mississippi River, the boiler exploded causing fire to spread throughout the steamer. The fire on board led to the collapse of both of the Sultana's smokestacks, killing many passengers.[17]

See also

References

  1. "Engineering." Definition of in Oxford Dictionaries (British & World English). N.p., n.d. Web. 22 Feb. 2013.
  2. Dax, Mark (Dec 1997). "Failure Analysis Prevents Disaster Reoccurance". R&D Magazine. EBSOhost.com: 30–31.
  3. "Failure." Definition of in Oxford Dictionaries (British & World English). N.p., n.d. Web. 23 Feb. 2013.
  4. Doehring, James; Fritsky, Lauren. "What Is a Static Load?". WiseGeek.
  5. 1 2 3 Norton, Robert L. (2011). Machine Design: An Integrated Approach. Boston: Prentice Hall.
  6. "CreepAbout Our Definitions: All Forms of a Word (noun, Verb, Etc.) Are Now Displayed on One Page." Merriam-Webster. Merriam-Webster, n.d. Web. 23 Feb. 2013.
  7. 1 2 Hibbeler, R. C. (2011). Mechanics of Materials. Boston: Prentice Hall.
  8. "Fatigue." Definition of in Oxford Dictionaries (British & World English). N.p., n.d. Web. 21 Feb. 2013
  9. 1 2 Marshall, Richard D. (1982). "Investigation of the Kansas City Hyatt Regency Walkways Collapse". U.S. Dept. of Commerce, National Bureau of Standards. Washington, D.C.
  10. Carl Strock. "Defense.gov News Transcript: Defense Department Special Briefing on Efforts to Mitigate Infrastructure Damage from Hurricane Katrina". United States Department of Defense. Retrieved 22 Feb 2013.
  11. 1 2 3 Dunbar, R. L. M.; R., Garud (2009). "Distributed Knowledge and Indeterminate Meaning: The Case of the Columbia Shuttle Flight". Organization Studies. 30 (4): 397–421. doi:10.1177/0170840608101142.
  12. "Disaster." Definition of in Oxford Dictionaries (British & World English). N.p., n.d. Web. 22 Feb. 2013.
  13. 1 2 "Hyatt Regency Walkway Collapse." ENGINEERING.com. N.p., n.d. Web. 22 Feb. 2013.
  14. Columbia Accident Investigation Board, Report Volume 1, August 2003
  15. "Molten Aluminum found on Columbia's thermal tiles". USA Today. Associated Press. March 4, 2003. Retrieved February 15, 2013
  16. 1 2 Berryman, J.O.; Potter; Oliver, S. (May 1988). "The Ill-Fated Passenger Steamer Sultana: An Inland Maritime Mass Disaster of Unparalleled Magnitude" (PDF). Journal of Forensic Sciences. JFSCA. 33 (3): 842–850.
  17. Expedition Journal Stephen Ambrose May. "Disaster on the Mississippi: The Sultana Tragedy." National Geographic. National Geographic Society, n.d. Web. 22 Feb. 2013.
This article is issued from Wikipedia - version of the 11/30/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.