Electroglottograph

Electroglottograph, Glottal Enterprises model EG2-PCX shown here.
Photograph of an EGG signal from a Glottal Enterprises EG2-PC (top) and a Laryngograph/Kay electroglottograph (bottom).
Showing the contacts on the electrodes from a Glottal Enterprises EG2-PCX. Electrodes for other electroglottographs are typically very similar in size and shape. This set of electrodes is from a Glottal Enterprises EG2-PCX, which is a dual-channel EGG, so it has 2 sets of contacts. Electrode jelly is used to help conduct the signal from the contacts to the neck.
Figure 7 of: Martin Rothenberg and James J. Mashie, Monitoring Vocal Fold Abduction Through Vocal Fold Contact Area Journal of Speech and Hearing Research, Volume 31, 338-351, September 1988

The electroglottograph, or EGG, (also referred to as a laryngograph) is a device used for the noninvasive measurement of the degree of contact between the vibrating vocal folds during voice production. Though it is difficult to verify the assumption precisely, the aspect of contact being measured by a typical EGG unit is considered to be the vocal fold contact area (VFCA).[1][2] To measure VFCA, an electrodes are applied on the surface of the neck so that the EGG records variations in the transverse electrical impedance of the larynx and nearby tissues by means of a small A/C electric current (in megaHertz). This electrical impedance will vary slightly with the area of contact between the moist vocal folds during the setment of the glottal vibratory cycle in which the folds are in contact. However, because the percentage variation in the neck impedance caused by vocal fold contact can be extremely small and varies considerably between subjects, no absolute measure of contact area is obtained, only the pattern of variation for a given subject.

Early commercial available EGG units were compared quite thoroughly by Baken.[3] However, using modern low noise electronics, EGG noise levels can be brought down enough so that the noise is approximately 40 dB (a factor of 100) less than a typical EGG signal from an adult voice.

In addition, by using multiple channels simultaneously, the technique can be made easier to use and more reliable by giving the user an indication of the correct positioning of the electrodes, and providing a quantitative measure of vertical movements of the larynx during voice production.[4]

Electroglottograph signals have also been used in stroboscope synchronization, voice fundamental frequency tracking, tracking vocal fold abductory movements[5] and the study of the singing voice.[6]

Electroglottographic wavegrams are a new technique for displaying and analyzing EGG signals. This technique provides an intuitive means for quickly assessing vocal fold contact phenomena and their variation over time.[7]

References

  1. Lecluse, FLE; Brocaar, MP; Verschurre, J (1975). "The electoglottography and its relation to glottal activity". Fol Phoniatr. 27: 215–24. doi:10.1159/000263988.
  2. Fourcin, AJ; Abberton, E (1971). "First applications of a new laryngograph". Med Biol Illus. 21: 172–82.
  3. Baken RJ. Clinical measurement of speech and voice. Boston: College Hill Press, 1987.
  4. Rothenberg, M. A Multichannel Electroglottograph, Journal of Voice, Vol. 6., No. 1, pp. 36-43,1992.
  5. Rothenberg, M; Mahshie, JJ (1988). "Monitoring vocal fold abduction through vocal fold contact area" (PDF). J Speech Hear Res. 31: 338–51. doi:10.1044/jshr.3103.338.
  6. Miller, D.G., Resonance in Singing, Inside View Press, June 2008. ISBN 978-0-9755307-5-7
  7. Herbst, C. T.; Fitch, W. T.; Svec, J. G. (2010). "Electroglottographic wavegrams: a technique for visualizing vocal fold dynamics noninvasively". J Acoust Soc Am. 128: 3070–3078. doi:10.1121/1.3493423.

External links

This article is issued from Wikipedia - version of the 9/24/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.