Dyadics

In mathematics, specifically multilinear algebra, a dyadic or dyadic tensor is a second order tensor, written in a notation that fits in with vector algebra.

There are numerous ways to multiply two Euclidean vectors. The dot product takes in two vectors and returns a scalar, while the cross product returns a pseudovector. Both of these have various significant geometric interpretations and are widely used in mathematics, physics, and engineering. The dyadic product takes in two vectors and returns a second order tensor called a dyadic in this context. A dyadic can be used to contain physical or geometric information, although in general there is no direct way of geometrically interpreting it.

The dyadic product is distributive over vector addition, and associative with scalar multiplication. Therefore the dyadic product is linear in both of its operands. In general, two dyadics can be added to get another dyadic, and multiplied by numbers to scale the dyadic. However, the product is not commutative; changing the order of the vectors results in a different dyadic.

The formalism of dyadic algebra is an extension of vector algebra to include the dyadic product of vectors. The dyadic product is also associative with the dot and cross products with other vectors, which allows the dot, cross, and dyadic products can be combined together to obtain other scalars, vectors, or dyadics.

It also has some aspects of matrix algebra, as the numerical components of vectors can be arranged into row and column vectors, and those of second order tensors in square matrices. Also, the dot, cross, and dyadic products can all be expressed in matrix form. Dyadic expressions may closely resemble the matrix equivalents.

The dot product of a dyadic with a vector gives another vector, and taking the dot product of this result gives a scalar derived from the dyadic. The effect that a given dyadic has on other vectors can provide indirect physical or geometric interpretations.

Dyadic notation was first established by Josiah Willard Gibbs in 1884. The notation and terminology are relatively obsolete today. Its uses in physics include continuum mechanics and electromagnetism.

In this article, upper-case bold variables denote dyadics (including dyads) whereas lower-case bold variables denote vectors. An alternative notation uses respectively double and single over- or underbars.

Definitions and terminology

Dyadic, outer, and tensor products

A dyad is a tensor of order two and rank one, and is the result of the dyadic product of two vectors (complex vectors in general), whereas a dyadic is a general tensor of order two (which may be full rank or not).

There are several equivalent terms and notations for this product:

In the dyadic context they all have the same definition and meaning, and are used synonymously, although the tensor product is an instance of the more general and abstract use of the term.

Three-dimensional Euclidean space

To illustrate the equivalent usage, consider three-dimensional Euclidean space, letting:

be two vectors where i, j, k (also denoted e1, e2, e3) are the standard basis vectors in this vector space (see also Cartesian coordinates). Then the dyadic product of a and b can be represented as a sum:

or by extension from row and column vectors, a 3×3 matrix (also the result of the outer product or tensor product of a and b):

A dyad is a component of the dyadic (a monomial of the sum or equivalently an entry of the matrix) — the dyadic product of a pair of basis vectors scalar multiplied by a number.

Just as the standard basis (and unit) vectors i, j, k, have the representations:

(which can be transposed), the standard basis (and unit) dyads have the representation:


For a simple numerical example in the standard basis:

N-dimensional Euclidean space

If the Euclidean space is N-dimensional, and

where ei and ej are the standard basis vectors in N-dimensions (the index i on ei selects a specific vector, not a component of the vector as in ai), then in algebraic form their dyadic product is:

This is known as the nonion form of the dyadic. Their outer/tensor product in matrix form is:

A dyadic polynomial A, otherwise known as a dyadic, is formed from multiple vectors ai and bj:

A dyadic which cannot be reduced to a sum of less than N dyads is said to be complete. In this case, the forming vectors are non-coplanar, see Chen (1983).

Classification

The following table classifies dyadics:

Determinant Adjugate Matrix and its rank
Zero = 0 = 0 = 0; rank 0: all zeroes
Linear = 0 = 0 ≠ 0; rank 1: at least one non-zero element and all 2 × 2 subdeterminants zero (single dyadic)
Planar = 0 ≠ 0 (single dyadic) ≠ 0; rank 2: at least one non-zero 2 × 2 subdeterminant
Complete ≠ 0 ≠ 0 ≠ 0; rank 3: non-zero determinant

Identities

The following identities are a direct consequence of the definition of the tensor product:[1]

  1. Compatible with scalar multiplication:
    for any scalar .
  2. Distributive over vector addition:

Dyadic algebra

Product of dyadic and vector

There are four operations defined on a vector and dyadic, constructed from the products defined on vectors.

Left Right
Dot product

Cross product

Product of dyadic and dyadic

There are five operations for a dyadic to another dyadic. Let a, b, c, d be vectors. Then:

Dot Cross
Dot Dot product

Double dot product

or

Dot–cross product

Cross Cross–dot product

Double cross product

Letting

be two general dyadics, we have:

Dot Cross
Dot Dot product

Double dot product

or

Dot–cross product

Cross Cross–dot product

Double cross product

Double-dot product

There are two ways to define the double dot product, one must be careful when deciding which convention to use. As there are no analogous matrix operations for the remaining dyadic products, no ambiguities in their definitions appear.

The double-dot product is commutative due to commutativity of the normal dot-product:

There is a special double dot product with a transpose

Another identity is:

Double-cross product

We can see that, for any dyad formed from two vectors a and b, its double cross product is zero.

However, by definition, a dyadic double-cross product on itself will generally be non-zero. For example, a dyadic A composed of six different vectors

has a non-zero self-double-cross product of

Tensor contraction

Main article: Tensor contraction

The spur or expansion factor arises from the formal expansion of the dyadic in a coordinate basis by replacing each dyadic product by a dot product of vectors:

in index notation this is the contraction of indices on the dyadic:

In three dimensions only, the rotation factor arises by replacing every dyadic product by a cross product

In index notation this is the contraction of A with the Levi-Civita tensor

Unit dyadic

There exists a unit dyadic, denoted by I, such that, for any vector a,

for any vector a.

Given a basis of 3 vectors a, b and c, with reciprocal basis , the unit dyadic is expressed by

In the standard basis,

Explicitly, the dot product to the right of the unit dyadic is

and to the left

The corresponding matrix is

This can be put on more careful foundations (explaining what the logical content of "juxtaposing notation" could possibly mean) using the language of tensor products. If V is a finite-dimensional vector space, a dyadic tensor on V is an elementary tensor in the tensor product of V with its dual space.

The tensor product of V and its dual space is isomorphic to the space of linear maps from V to V: a dyadic tensor vf is simply the linear map sending any w in V to f(w)v. When V is Euclidean n-space, we can use the inner product to identify the dual space with V itself, making a dyadic tensor an elementary tensor product of two vectors in Euclidean space.

In this sense, the unit dyadic ij is the function from 3-space to itself sending a1i + a2j + a3k to a2i, and jj sends this sum to a2j. Now it is revealed in what (precise) sense ii + jj + kk is the identity: it sends a1i + a2j + a3k to itself because its effect is to sum each unit vector in the standard basis scaled by the coefficient of the vector in that basis.

Properties of unit dyadics

where "tr" denotes the trace.

Examples

Vector projection and rejection

A nonzero vector a can always be split two perpendicular components, one parallel (‖) to the direction of a unit vector n, and one perpendicular (⊥) to it;

The parallel component is found by vector projection, which is equivalent to the dot product of a with the dyadic nn,

and the perpendicular component is found from vector rejection, which is equivalent to the dot product of a with the dyadic Inn,

Rotation dyadic

Further information: Axis–angle representation

2d rotations

The dyadic

is a 90° anticlockwise rotation operator in 2d. It can be left-dotted with a vector r = xi + yj to produce the vector,

in summary

or in matrix notation

For any angle θ, the 2d rotation dyadic for a rotation anti-clockwise in the plane is

where I and J are as above, and the rotation of any 2d vector a = axi + ayj is

3d rotations

A general 3d rotation of a vector a, about an axis in the direction of a unit vector ω and anticlockwise through angle θ, can be performed using Rodrigues' rotation formula in the dyadic form

where the rotation dyadic is

and the Cartesian entries of ω also form those of the dyadic

The effect of Ω on a is the cross product

which is the dyadic form the cross product matrix with a column vector.

Lorentz transformation

In special relativity, the Lorentz boost with speed v in the direction of a unit vector n can be expressed as

where

is the Lorentz factor.

Related terms

Some authors generalize from the term dyadic to related terms triadic, tetradic and polyadic.[2]

See also

References

  1. Spencer (1992), page 19.
  2. For example, I. V. Lindell and A. P. Kiselev (2001). "POLYADIC METHODS IN ELASTODYNAMICS". Progress In Electromagnetics Research, PIER 31: 113–154.

External links

This article is issued from Wikipedia - version of the 10/9/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.