|Products||Bridges, Heavy lifting equipment|
Dorman Long is an engineering consultancy and equipment manufacturer for the construction of long-span bridges, power stations, refineries, offshore structures, stadia and other large building structures. Originally based in Middlesbrough, North East England, the company was a major steel producer later diversifying into bridge building. Dorman Long was once listed on the London Stock Exchange.
The company was founded by Arthur Dorman and Albert de Lande Long when they acquired West Marsh Iron Works in 1875. In the 1920s Dorman Long took over the concerns of Bell Brothers and Bolckow and Vaughan and diversified into the construction of bridges. In 1938 Ellis Hunter took over as Managing Director and he continued to lead the business until 1961.
In 1967 Dorman Long was nationalised, along with 13 other British steel-making firms, becoming subsumed into the government-owned British Steel Corporation. In 1982 Redpath Dorman Long, the engineering part of the business, was acquired by Trafalgar House who in 1990 merged it into Cleveland Bridge & Engineering Company in Darlington.
In 2000 there was a management buyout of Cleveland Bridge which led to the formation of Dorman Long Technology (DLT) in August 2000. DLT was formed as an amalgamation of the Cleveland Bridge engineering office with an outside construction consultant (Lowther-Rolton) and a heavy lift contractor (Zalcon), both of whom had been working closely with Cleveland Bridge throughout the 1990s. DLT is now an independent company, registered in the UK, carrying out bridge design and construction engineering together with design and supply of heavy lifting equipment for the construction of bridges, refineries, power stations, wind farms, offshore drilling rigs, large roofs and other large pre-assembled structures.
Iron and Steel
Iron-making has been known in Cleveland since the Romans found iron slags in North Yorkshire, with small-scale iron-making known to have taken place at Rievaulx and Whitby Abbeys and at Gisborough Priory in the 17th century.
Some of the key events connected with iron-making in Cleveland:
1855: 30 blast furnaces operate within six miles (10 km) of Middlesbrough.
1865: One million tonnes per annum (TPA) of iron are produced to make the area one of the world's major centres of iron production.
1875: Number of blast furnaces increases to 100, producing two million TPA.
1901: Partial amalgamation of Bell companies with Dorman Long.
1902: The first integrated steelworks, involving conversion of iron ore to finished rolled steel shapes, is built at Cargo Fleet.
1917: The Redcar steel plant is opened, making steel in the 'open hearth' process.
1918: Cleveland Works opens.
1924: Dorman Long wins the contract to build the Sydney Harbour Bridge.
1928-9: Dorman Long takes over residues of Bell and Bolckow Vaughan.
1946: Dorman Long purchases 600 acres (2.4 km2) of land between the Redcar and Cleveland Works to build the Lackenby development.
1967: Dorman Long, South Durham Steel Iron Co, and Stewarts and Lloyds come together to create British Steel and Tube Ltd.
1967: The steel industry is nationalised and the British Steel Corporation is born.
1973: The existing Redcar Ironworks site development begins.
1979: The number of blast furnaces drops to one - producing 3.3 million TPA.
1989: Company is privatised becoming British Steel plc.
1990: Merged with The Cleveland Bridge & Engineering Company, Darlington.
2000: Dorman Long Technology Ltd formed as an independent company as part of a management buy out of Cleveland Bridge in August 2000.
2015: Former Dorman Long Steel plant on Teesside ceased production after SSI mothballed the Redcar works following a global downturn in the price of steel and later announced its UK arm had gone into liquidation.
The most famous bridge ever constructed by a Teesside company was Dorman Long's Sydney Harbour Bridge of 1932, of similar construction to but not (contrary to popular belief) modelled on the 1928 Tyne Bridge, a construction regarded as the symbol of Tyneside's Geordie pride, but also a product of Dorman Long's Teesside workmanship. The greatest example of Dorman Long's work in Teesside itself is the single span Newport Lifting Bridge (a Grade II Listed Building). Opened by the Duke of York in February 1934 it was England's first vertical lift bridge. With a lifting span of 270 feet (82 m) long by 66 feet (20 m) wide, it is constructed from 8000 tons of Teesside steel and 28,000 tons of concrete with towers 182 feet (55 m) high. The electrically operated lifting mechanism allowed the road to be lifted 100 feet (30 m) in one and a half minutes by means of ropes passing through sheaves in the four corner towers. Newport Bridge is no longer raised or lowered; it is a permanent road crossing the River Tees.
The following is a list of some of the bridges built by the Dorman Long: it is not fully comprehensive.
|Omdurman Bridge||White Nile, Sudan||1926||Total length 2,012 feet (613 m), 7 fixed spans, one swing span, 3700 tons|
|Desouk Bridge||Lower Nile, Egypt||1927||Total length 2,010 feet (610 m), 10 spans including 194 feet (59 m) swing span, 3800 tons|
|Tyne Bridge||Newcastle, England||1928||Total length 1,254 feet (382 m), approximately 8,000 tons, (Road)|
|Alfred Beit Bridge||South Africa||1929||Total length 1,515 feet (462 m), 1876 tons|
|Sydney Harbour Bridge||Sydney, Australia||1932||Total length 3,770 feet (1,150 m), total weight of fabricated steelwork 51000, weight of steel in the arch 38000 tons|
|Grafton Bridge||Grafton, NSW, Australia||1932||Total length 1,309 feet (399 m), (Road and Rail) It is a dual level Bascule Bridge, the upper deck carrying a roadway and the lower level carrying the rail line and foot bridge.|
|Lambeth Bridge||London, England||1932||Total length 776 ft (237 m), 5 spans, 4620 tons,(Road)|
|Memorial Bridge, Bangkok||Thailand||1932||Total length 755 feet (230 m), 1100 tons, (Road)|
|Khedive Ismail Bridge||Cairo, Egypt||1933||Total length 1,250 feet (380 m), 3000 tons|
|Newport bridge||Middlesbrough||1934||The central lifting span is 270 feet (82m) long and 66 feet (20m) wide, weighing 5400 tons (6993 metric tonnes); the towers are 182 feet (55m) high. The total weight is 8,000 tons.|
|Birchenough Bridge||Zimbabwe||1935||1242 tons.|
|Storstrøm Bridge||Denmark||1937||Total length 10,535 feet (3,211 m), 21000 tons, (Railway and Road)|
|Chien Tang River Bridge||China||1937||Total length 3,840 feet (1,170 m), 16 equal spans, 4135 tons, (Railway and Road)|
|Silver Jubilee Bridge||Runcorn and Widnes, England||1961||Total length 1,582 feet (482 m), (Road)|
In 1904 Sir Arthur Dorman of Dorman Long gave the Dorman Museum to Middlesbrough in honour of his youngest son, George Lockwood Dorman, an avid collector who was killed in the Boer War. Amongst the museum’s many exhibits, is a collection of ceramics from the local Linthorpe Pottery, which was renowned for its iridescent glazes, that at the time were not produced anywhere else in Europe. The museum has one of the largest collections of these highly distinctive ceramics in the world.
- "North East England History Pages". talktalk.net. Retrieved 22 October 2015.
- Tolliday, Steven (1987). Business, Banking, and Politics: The Case of British Steel, 1918-1939. Harvard University Press. pp. 47–48.
- "SCALE AND SCOPE". google.co.uk. Retrieved 22 October 2015.
- Cleveland Bridge history
- "Dorman Long Technology home page". dormanlongtechnology.com. Retrieved 22 October 2015.
- Terry Macalister. "Redcar steelworks owner goes into liquidation threatening all 2,200 jobs". the Guardian. Retrieved 22 October 2015.
- "Dorman Museum". dormanmuseum.co.uk. Retrieved 22 October 2015.
|Wikimedia Commons has media related to Dorman Long.|
- Dorman Long Technology Homepage
- Dorman Long information at Structurae
- Mine of Information
- Dorman Long Handbooks 1906, 1924 & 1964