Diver's pump

Diver's pump

Three cylinder rotary diver's pump "П3" (flywheels removed), manufactured in USSR in 1977.
Other names Diving air pump
Uses Suuply of breathing air to a copper helmet diver

A diver's pump is a manually operated low pressure air compressor used to provide divers in standard diving dress with air while they are underwater.[1][2]

Rotary

Rotary pumps are driven by a crankshaft that is rotated by handles on two flywheels attached to the ends of the shaft on each side of the pump. Rotary pumps can be built with two and three cylinders, and are operated by a team of two men. Pistons attached to the crankshaft draw in air through the inlet valves and then pump it through the outlet valves to an air hose which delivers the air to the helmet of the diver. Cylinders, valves and outlet fittings for air are generally made from brass for corrosion resistance in the marine environment.

Lever

Lever pumps have two cylinders, which are operated by rocking a beam with handles attached to its ends which is pivoted at the centre. The piston rods are connected to the beam on either side of the pivot.[1][2] Upward movement of the pistons pulls the air into the cylinders through the inlet valves, and then downward movement pumps the air through the hose to the helmet of the diver. Cylinders, valves and outlet for air are made from brass for the most reliability.[1]

Other components

The pump may be mounted in a cabinet and may be fitted with a pressure gauge.

See also

References

  1. 1 2 3 Davis, RH (1955). Deep Diving and Submarine Operations (6th ed.). Tolworth, Surbiton, Surrey: Siebe Gorman & Company Ltd. p. 693.
  2. 1 2 Stillson, GD (1915). "Report in Deep Diving Tests.". US Bureau of Construction and Repair, Navy Department. Technical Report. Retrieved 2008-09-12.
This article is issued from Wikipedia - version of the 6/12/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.