In dimensional analysis, a dimensionless quantity is a quantity to which no physical dimension is applicable. It is thus a bare number, and is therefore also known as a quantity of dimension one. Dimensionless quantities are widely used in many fields, such as mathematics, physics, engineering, and economics. Numerous well-known quantities, such as π, e, and φ, are dimensionless. By contrast, examples of quantities with dimensions are length, time, and speed, which are measured in dimensional units, such as metre, second and metre/second.
Dimensionless quantities are often obtained as products or ratios of quantities that are not dimensionless, but whose dimensions cancel out in the mathematical operation. An example of such a ratio is engineering strain, a measure of physical deformation. It is defined as a change in length divided by the initial length. Since both quantities have the dimension length, their ratio is dimensionless. Another example is alcohol by volume, which characterizes the concentration of ethanol in an alcoholic beverage.
All pure numbers are dimensionless. A dimensionless quantity may have dimensionless units, even though it has no physical dimension associated with it. For example, to show the quantity being measured, for example mass fraction or mole fraction, it is sometimes helpful to use the same units in both the numerator and denominator (kg/kg or mol/mol). The quantity may also be given as a ratio of two different units that have the same dimension (for instance, light years over metres). This may be the case when calculating slopes in graphs, or when making unit conversions. Such notation does not indicate the presence of physical dimensions, and is purely a notational convention. Other common dimensionless units are percentages % (= 0.01), ‰ (= 0.001); parts-per notation ppm (= 10−6), ppb (= 10−9), ppt (= 10−12); angle units (degrees, radians, grad); dalton and mole. Units of number such as the dozen, gross, and googol are also dimensionless.
When a quantity is the ratio of two other quantities, each of the same dimension, the defined quantity is dimensionless and has the same value regardless of the units used to calculate the two composing quantities. For instance, if body A exerts a force of magnitude F on body B, and B exerts a force of magnitude f on A, then the ratio F/f is always equal to 1, regardless of the actual units used to measure F and f. This is a fundamental property of dimensionless proportions and follows from the assumption that the laws of physics are independent of the system of units used in their expression. In this case, if the ratio F/f was not always equal to 1, but changed if one switched from SI to CGS, that would mean that Newton's Third Law's truth or falsity would depend on the system of units used, which would contradict this fundamental hypothesis. This assumption that the laws of physics are not contingent upon a specific unit system is the basis for the Buckingham π theorem, as discussed in a later section.
Dimensionless quantities are used for many purposes.
Several examples from mathematics include proportions, angles, and special numbers. A simple problem illustrates how a proportion may be a dimensionless quantity. Sarah says, "Out of every 10 apples I gather, 1 is rotten." The rotten-to-gathered ratio is (1 apple) / (10 apples) = 0.1 = 10%, which is a dimensionless quantity. Similarly, angles may be defined as a proportion. The radian measure of angles is the ratio of the length of a circle's arc subtended by an angle whose vertex is the centre of the circle to some other length. The ratio—i.e., length divided by length—is dimensionless. When using radians as the unit, the length that is compared is the length of the radius of the circle. When using degree as the units, the arc's length is compared to 1/360 of the circumference of the circle. In the case of the dimensionless quantity π, being the ratio of a circle's circumference to its diameter, the number would be constant regardless of what unit is used to measure a circle's circumference and diameter (e.g., centimetres, miles, light-years, etc.), as long as the same unit is used for both. Additionally, the golden ratio, φ, is simply the ratio of length of the two sides of a golden rectangle. In statistics the coefficient of variation is the ratio of the standard deviation to the mean and is used to measure the dispersion in the data.
Dimensionless physical constants
Certain fundamental physical constants, such as the speed of light in a vacuum, the universal gravitational constant, Planck's constant and Boltzmann's constant can be normalized to 1 if appropriate units for time, length, mass, charge, and temperature are chosen. The resulting system of units is known as the natural units. However, not all physical constants can be normalized in this fashion. For example, the values of the following constants are independent of the system of units and must be determined experimentally:
- α ≈ 1/137.036, the fine structure constant which is the coupling constant for the electromagnetic interaction;
- β (or μ) ≈ 1836, the proton-to-electron mass ratio. This ratio is the rest mass of the proton divided by that of the electron. An analogous ratio can be defined for any elementary particle;
- αs, the coupling constant for the strong force;
- αG ≈ 1.75×10−45, the gravitational coupling constant.
Physics and engineering
- Fresnel number – wavenumber over distance
- Reynolds number is commonly used in fluid mechanics to characterize flow, incorporating both properties of the fluid and the flow. It is interpreted as the ratio of inertial forces to viscous forces and can indicate flow regime as well as correlate to frictional heating in application to flow in pipes.
- Mach number – ratio of the speed of an object or flow relative to the speed of sound in the fluid.
- Relative density – density relative to water
- Relative atomic mass – measured in daltons
- Amount of substance – measured in moles as ratio between a given number of particles and Avogadro number or as ratio of mass and molar mass.
- Centimorgan is the unit of genetic distance.
- Cost of transport is the efficiency in moving from one place to another
- Elasticity – in economics how responsive an economic variable is to a change in another
- Kt/V – urea dialysis in medicine
- Föppl–von Kármán number – mechanical properties of cell wall for biological and structural engineering applications
Origin and derivation
Quantities having dimension 1, habitually called dimensionless quantities, regularly occur in sciences, and are formally treated with in the field of dimensional analysis. In the nineteenth century, French mathematician Joseph Fourier and Scottish physicist James Clerk Maxwell lead significant developments in the modern concepts of dimension and unit. Later work by British physicists Osborne Reynolds and Lord Rayleigh contributed to the understanding of dimensionless numbers in physics. Building on Rayleigh's method of dimensional analysis, Edgar Buckingham proved the π theorem (independent of French mathematician Joseph Bertrand's previous work) to formalize the nature of these quantities. Numerous other dimensionless numbers, mostly ratios, were coined in the early 1900s, particularly in the areas of fluid mechanics and heat transfer. Measuring ratios in the (derived) unit dB (decibel) finds widespread use nowadays. In the early 2000s, the International Committee for Weights and Measures discussed naming the unit of 1 as the 'uno', but the idea of just introducing a new SI-name for 1 was dropped.
Buckingham π theorem
The Buckingham π theorem indicates that validity of the laws of physics does not depend on a specific unit system. A statement of this theorem is that any physical law can be expressed as an identity involving only dimensionless combinations (ratios or products) of the variables linked by the law (e. g., pressure and volume are linked by Boyle's Law – they are inversely proportional). If the dimensionless combinations' values changed with the systems of units, then the equation would not be an identity, and Buckingham's theorem would not hold.
Another consequence of the Buckingham π theorem of dimensional analysis is that the functional dependence between a certain number (say, n) of variables can be reduced by the number (say, k) of independent dimensions occurring in those variables to give a set of p = n − k independent, dimensionless quantities. For the purposes of the experimenter, different systems that share the same description by dimensionless quantity are equivalent.
To demonstrate the application of the π theorem, consider the power consumption of a stirrer with a given shape. The power, P, in dimensions [M · L2/T3], is a function of the density, ρ [M/L3], and the viscosity of the fluid to be stirred, μ [M/(L · T)], as well as the size of the stirrer given by its diameter, D [L], and the angular speed of the stirrer, n [1/T]. Therefore, we have a total of n = 5 variables representing our example. Those n = 5 variables are built up from k = 3 fundamental dimensions, the length: L (SI units: m), time: T (s), and mass: M (kg).
According to the π-theorem, the n = 5 variables can be reduced by the k = 3 dimensions to form p = n − k = 5 − 3 = 2 independent dimensionless numbers. These quantities are , commonly named the Reynolds number which describes the fluid flow regime, and , the Power number, which is the dimensionless description of the stirrer.
Nondimensionalization of differential equations
The process of nondimensionalization has significant applications in the analysis of differential equations.
- List of dimensionless quantities
- Similitude (model)
- Orders of magnitude (numbers)
- Dimensional analysis
- Normalization (statistics) and standardized moment, the analogous concepts in statistics
- Buckingham π theorem
- ↑ "1.8 (1.6) quantity of dimension one dimensionless quantity". International vocabulary of metrology — Basic and general concepts and associated terms (VIM). ISO. 2008. Retrieved 2011-03-22.
- ↑ Baez, John (April 22, 2011). "How Many Fundamental Constants Are There?". Retrieved October 7, 2015.
- ↑ Huba, J. D. (2007). "NRL Plasma Formulary: Dimensionless Numbers of Fluid Mechanics". Naval Research Laboratory. Retrieved October 7, 2015.
- ↑ "BIPM Consultative Committee for Units (CCU), 15th Meeting" (PDF). 17–18 April 2003. Retrieved 2010-01-22.
- ↑ "BIPM Consultative Committee for Units (CCU), 16th Meeting" (PDF). Retrieved 2010-01-22.
- ↑ Dybkaer, René (2004). "An ontology on property for physical, chemical, and biological systems". APMIS Suppl. (117): 1–210. PMID 15588029.