Cornwerdermolen
| Cornwerdermolen | |
|---|---|
|
De Cornwerdermolen, September 2008 | |
| Origin | |
| Mill name | De Cornwerdermolen |
| Mill location |
Sotterruimerdijk 13, 8753 JA Cornwerd, Netherlands 53°04′46″N 5°24′06″E / 53.07944°N 5.40167°E |
| Operator(s) | Wetterskip Fryslân |
| Year built | 1907 |
| Information | |
| Purpose | Drainage mill |
| Type | Smock mill |
| Storeys | Three-storey smock |
| Base storeys | One-storey base |
| Smock sides | Eight sides |
| Number of sails | Four sails |
| Type of sails | Patent sails |
| Windshaft | Cast iron |
| Winding | Tailpole and winch |
| Type of pump | Archimedes' screw |
The Cornwerdermolen is a smock mill in Cornwerd, Friesland, Netherlands which has been restored to working order. The mill is listed as Rijksmonument number 39329.[1]
History
The Cornwerdermolen was built in 1907 by millwright J H Westra of Franeker. The mill originally drained two polders, each via a separate Archimedes' screw.[2] Five windmills were put out of work by the construction of the Cornwerdermolen and were demolished.[3] The smaller of the two screws was later removed. The mill was restored in 1969.[2] it worked until 13 November 1972,[3] when it lost two sails in a storm. Thereafter the work of the mill was done by an Archimedes' screw driven by a tractor. The tractor was later replaced by an electric motor.[2] The mill was restored in 1999. It is the most westerly windmill in Friesland.[4]
Description
The Cornwerdermolen is a "grondzeiler", a three-storey smock mill on a single-storey base. There is no stage, the sails reaching almost to the ground. The mill is winded by tailpole and winch. The four Patent sails, which have a span of 20.00 metres (65 ft 7 in), are carried in a cast-iron windshaft which was cast by H J Koning, Foxham, Groningen in 1907. The mill in winded by a tailpole and winch. The windshaft also carries the brake wheel which has 59 cogs. This drives the wallower (34 cogs) at the top of the upright shaft. At the bottom of the upright shaft, the crown wheel (103 cogs) drives the Archimedes' screw via a gearwheel with 37 cogs. The axle of the Archimedes' screw is 715 millimetres (2 ft 4 in) diameter and the Archimedes' screw is 1.52 metres (5 ft 0 in) diameter. It is 4.63 metres (15 ft 2 in) long, inclined at 19½°. Each turn of the screw lifts 1,147 litres (252 imp gal) of water.[2]
Public access
The Cornwerdermolen is open to the public by appointment.[5]
References
- ↑ "Technische gegevens" (in Dutch). De Hollandsche Molen. Retrieved 2 January 2010. (Click on Technische gegevens" to view.)
- 1 2 3 4 Stichting De Fryske Mole (1995). Friese Molens (in Dutch). Leeuwarden: Friese Pers Boekerij bv. p. 207. ISBN 90-330-1522-6.
- 1 2 "Cornwerd, Friesland" (in Dutch). Molendatabase. Retrieved 2 January 2010.
- ↑ "Geschiedenis" (in Dutch). De Hollandsche Molen. Retrieved 2 January 2010. (Click on Geschiedenis" to view.)
- ↑ "Informatie" (in Dutch). De Hollandsche Molen. Retrieved 2 January 2010. (Click on "Informatie" to view.)