Condensation algorithm

The condensation algorithm (Conditional Density Propagation) is a computer vision algorithm. The principal application is to detect and track the contour of objects moving in a cluttered environment. Object tracking is one of the more basic and difficult aspects of computer vision and is generally a prerequisite to object recognition. Being able to identify which pixels in an image make up the contour of an object is a non-trivial problem. Condensation is a probabilistic algorithm that attempts to solve this problem.

The algorithm itself is described in detail by Isard and Blake in a publication in the International Journal of Computer Vision in 1998.[1] One of the most interesting facets of the algorithm is that it does not compute on every pixel of the image. Rather, pixels to process are chosen at random, and only a subset of the pixels end up being processed. Multiple hypotheses about what is moving are supported naturally by the probabilistic nature of the approach. The evaluation functions come largely from previous work in the area and include many standard statistical approaches. The original part of this work is the application of particle filter estimation techniques.

The algorithm’s creation was inspired by the inability of Kalman filtering to perform object tracking well in the presence of significant background clutter. The presence of clutter tends to produce probability distributions for the object state which are multi-modal and therefore poorly modeled by the Kalman filter. The Condensation Algorithm in its most general form requires no assumptions about the probability distributions of the object or measurements.

Algorithm Overview

The Condensation algorithm seeks to solve the problem of estimating the conformation of an object described by a vector at time , given observations of the detected features in the images up to and including the current time. The Condensation Algorithm outputs an estimate to the state conditional probability density by applying a nonlinear filter based on factored sampling and can be thought of as a development of a Monte-Carlo method.[1] is a representation of the probability of possible conformations for the objects based on previous conformations and measurements. The condensation algorithm is a generative model[2] since it models the joint distribution of the object and the observer.

The conditional density of the object at the current time is estimated as a weighted, time-indexed sample set with weights . N is a parameter determining the number of sample sets chosen. A realization of is obtained by sampling with replacement from the set with probability equal to the corresponding element of .[1]

The assumptions that object dynamics form a temporal Markov chain and that observations are independent of each other and the dynamics facilitate the implementation of the Condensation Algorithm. The first assumption allows the dynamics of the object to be entirely determined by the conditional density . The model of the system dynamics determined by must also be selected for the algorithm, and generally includes both deterministic and stochastic dynamics.

The algorithm can be summarized by initialization at time and three steps at each time t:

Initialization

Form the initial sample set and weights by sampling according to the prior distribution . For example, specify as Gaussian and set the weights equal to each other.

Iterative Procedure

  1. Sample with replacement N times from the set with probability to generate a realization of .
  2. Apply the learned dynamics to each element of this new set, to generate a new set .
  3. To take into account the current observation , set for each element .

This algorithm outputs the probability distribution which can be directly used to calculate the mean position of the tracked object, as well as the other moments of the tracked object.

Cumulative weights can instead be used to achieve a more efficient sampling.[1]

Implementation Considerations

Since object-tracking can be a real-time objective, consideration of algorithm efficiency becomes important. The Condensation Algorithm is relatively simple when compared to the computational intensity of the Ricatti equation required for Kalman filtering. The parameter which determines the number of samples in the sample set will clearly hold a trade off in efficiency versus performance.

One way to increase efficiency of the algorithm is by selecting a low degree of freedom model for representing the shape of the object. The model used by Isard 1998 is a linear parameterization of B-splines in which the splines are limited to certain configurations. Suitable configurations were found by analytically determining combinations of contours from multiple views, of the object in different poses, and through principal component analysis (PCA) on the deforming object.

Isard and Blake model the object dynamics as a second order difference equation with deterministic and stochastic components:

where is the mean value of the state, and , are matrices representing the deterministic and stochastic components of the dynamical model respectively. , , and are estimated via Maximum Likelihood Estimation while the object performs typical movements.[1][3]

The observation model cannot be directly estimated from the data, requiring assumptions to be made in order to estimate it. Isard 1998 assumes that the clutter which may make the object not visible is a Poisson random process with spatial density and that any true target measurement is unbiased and normally distributed with standard deviation .

The basic Condensation algorithm is used to track a single object in time. It is possible to extend the Condensation algorithm using a single probability distribution to describe the likely states of multiple objects to track multiple objects in a scene at the same time.[4]

Since clutter can cause the object probability distribution to split into multiple peaks, each peak represents a hypothesis about the object configuration. Smoothing is a statistical technique of conditioning the distribution based on both past and future measurements once the tracking is complete in order to reduce the effects of multiple peaks.[5] Smoothing cannot be directly done in real-time since it requires information of future measurements.

Applications

The algorithm can be used for vision-based robot localization of mobile robots.[6] Instead of tracking the position of an object in the scene however, the position of the camera platform is tracked. This allows the camera platform to be globally localized given a visual map of the environment.

Extensions of the condensation algorithm have also been used to recognize human gestures in image sequences. This application of the condensation algorithm impacts the range of human-computer interactions possible. It has been used to recognize simple gestures of a user at a whiteboard to control actions such as selecting regions of the boards to print or save them.[7] Other extensions have also been used for tracking multiple cars in the same scene.[8]

The condensation algorithm has also been used for face recognition in a video sequence.[9]

Resources

An implementation of the Condensation Algorithm in C can be found on Michael Isard’s website.

An implementation in Matlab can be found on the Mathworks File Exchange.

An example of implementation using the OpenCV library can be found on the OpenCV forums.

See also

References

  1. 1 2 3 4 5 Isard, M.; Blake, A (August 1998). "CONDENSATION-- conditional density propagation of visual tracking". International Journal of Computer Vision. 29 (1): 5–28. doi:10.1023/A:1008078328650.
  2. Sminchisescu, C.; Kanaujia, A.; Metaxas, D.N. (November 2007). "BM3E: Discriminative Density Propagation for Visual Tracking". IEEE. 29 (11): 2030–2044. doi:10.1109/tpami.2007.1111.
  3. Blake, Andrea; Isard, Michael; Reynard, David (October 1995). "Learning to track the visual motion of contours". Artificial Intelligence. 78 (1-2): 179–212. doi:10.1016/0004-3702(95)00032-1.
  4. Koller-Meier, Esther B.; Ade, Frank (28 February 2001). "Tracking multiple objects using the Condensation algorithm". Robotics and Autonomous Systems. 34 (2-3): 93–105. doi:10.1016/s0921-8890(00)00114-7.
  5. Isard, Michael; Blake, Andrew (28 May 2006). "A smoothing filter for condensation". Lecture Notes in Computer Science. 1406: 767–781. doi:10.1007/BFb0055703.
  6. Dellaert, F.; Burgard, W.; Fox, D.; Thrun, S. (1999). "Using the CONDENSATION algorithm for robust, vision-based mobile robot localization". Computer Vision and Pattern Recognition.
  7. Black, M.J.; Jepson, A.D. (14 April 1998). "Recognizing temporal trajectories using the condensation algorithm". Automatic Face and Gesture Recognition: 16–21.
  8. Meier, E.B.; Ade, Frank (1999). "Tracking cars in range images using the CONDENSATION algorithm". Intelligent Transportation Systems: 129–134.
  9. Zhou, Shaohua; Krueger, V.; Chellappa, R. (21 May 2002). "Face recognition from video: a CONDENSATION approach". Automatic Face and Gesture Recognition: 221–226.
This article is issued from Wikipedia - version of the 11/26/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.