Colt Anaconda

This article is about the Colt Anaconda. For other Colt Double Action firearms, see Colt Double Action.
Colt Anaconda

.44 Magnum Colt Anaconda in three barrel lengths
Type Revolver
Place of origin United States
Production history
Manufacturer Colt's Manufacturing Company
Produced 1990–1999
Variants Kodiak
Specifications
Weight
  • 47 oz. / 1.3kg (4 in bbl)
  • 53 oz. / 1.5kg (6 in bbl)
  • 59 oz. / 1.7kg (8 in bbl)
Length
  • 9⅝ in / 24.5cm (4 in bbl)
  • 11⅝ in / 29.5cm (6 in bbl)
  • 13⅝ in / 34.6cm (8 in bbl)
Barrel length
  • 4 in bbl (102 mm)
  • 6 in bbl (153 mm)
  • 8 in bbl (203 mm)

Cartridge
Action Double-action
Feed system Six round cylinder
Sights Adjustable open iron sights
Anaconda rollmark

Introduced in 1990, the Colt Anaconda is a large frame double-action revolver featuring a full length under-barrel ejection-rod lug and six round cylinder, designed and produced by the Colt's Manufacturing Company. Chambered for the powerful .44 Magnum and .45 Colt centerfire ammunition cartridges, the Anaconda marked the Hartford, Connecticut firm’s first foray into the popular large-bore Magnum pistol market.[1]

Development

Built on a new and heavier ‘AA’ frame, the Anaconda was brought out to compete with .44 Magnum contemporaries such as the Smith & Wesson Model 29, the Sturm, Ruger & Co. Redhawk and Blackhawk, and the Dan Wesson Firearms Model 44. Considering that many of these models had been marketed and sold for fully 35 years upon its introduction, the Anaconda was a very late entry into the large-bore handgun market.[2] Unlike most other pistols introduced in the 1980s and 1990s, the Anaconda was never offered with a carbon steel blued finish, but was available only in stainless steel.[1] When originally introduced Anacondas were plagued with poor accuracy, but changes to the barrels quickly corrected the problems to the point that Colt billed its new pistol as among the most accurate .44 Magnum revolvers in production.[2][3] Anaconda revolvers were primarily marketed for sport enthusiast shooters and hunters, as they are too large for law enforcement general duty use or concealed-carry, although made-to-order limited production versions of the gun continued to be available from the Colt custom gun shop until approximately 2003.[1]

Features

Originally chambered for the .44 Magnum cartridge, in 1993 the Anaconda began to be offered in .45 Colt cartridge as well. Its fit and finish resembled an upsized King Cobra married to a ventilated-rib barrel reminiscent of the Python's.[2] Initially marketed with a satin brushed stainless finish, a highly polished mirror-like option known as "Ultimate Stainless" was cataloged for a time through the Colt Custom Shop. Anacondas came equipped with four, six, or eight inch barrels, neoprene synthetic rubber finger-grooved combat-style grips with nickel colored 'Rampant Colt' medallions, large target type hammers and triggers, as well as open iron sights with a red insert front and fully adjustable white outline rear.[2][3] Some models were factory drilled and tapped for telescopic sight mounting, while others shipped with recoil reducing Mag-na-ported barrels.[3] The trigger actions on these guns are rated as very high-quality, and the heavy-duty solid construction and weight tends to absorb recoil, making the Anaconda relatively easy to shoot with heavy loads.[2][3]

Kodiak

Introduced in 1993, the Kodiak was similar to the Anaconda in that it was constructed entirely of stainless steel, but offered the additional features of a recoil-reducing factory magna-ported barrel and unfluted cylinder.[4]

There were 2000 Kodiaks made as a special run of Anacondas, breaking away from their long history of naming revolvers after snakes.[4] A special run of 1000 King Cobras was made about the same time, having the same Magna-Ported barrel and unfluted cylinder and were called the Grizzly.[4] There was an uncataloged 5" barrel version of the Anaconda, with reportedly less than 150 made. These 5" versions command very high prices when they are encountered. Additionally, Colt made an extremely low number of 4" barrel Anacondas chambered in .45 Colt. This ultra-rare variation commands a premium price when encountered as well.

See also

References

  1. 1 2 3 “Colt mk. V revolvers: Trooper, KingCobra, Anaconda (USA)” World Guns Web site. Accessed November 26, 2008.
  2. 1 2 3 4 5 Taffin, John. "Colt's Biggest Snake, the Anaconda". Sixguns.com. Retrieved November 26, 2008.
  3. 1 2 3 4 "Anaconda". Colts Mfg. Retrieved November 26, 2008.
  4. 1 2 3 Sapp, Rick (2007). Standard Catalog of Colt Firearms. F+W Media, Inc,. p. 125. ISBN 978-0-89689-534-8.
This article is issued from Wikipedia - version of the 7/6/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.